Resource icon

obs-midi-mg 3.1.5

Go to download
Overview Updates (26) Reviews (12) History Discussion
nhielost updated obs-midi-mg with a new update entry:

obs-midi-mg v3.1.5

obs-midi-mg v3.1.5 is now available.​

This is a bugfix release.

Changes:​

  • Change execution of Bindings to use faster and more efficient design using thread pooling
  • The Field editor message is now more clear to indicate what it actually does
  • Reference Fields will now default to Velocity (or equivalent) upon creation
  • Transition Bar actions can now ignore the Hold Time parameter to allow for persistent scene transitions (OBS forum)...
Click to expand...

Read the rest of this update entry...
 
Unfortunately, even after updating the plugin, the hold time parameter continues to work.
I tried setting it to 10 and 5000, but I still get the same effect.
After the hold time expires, the PGM switches back.
I haven't updated OBS to 32.1 yet;
I'm still using 32.0.4.
 
At first I was unsure how to disable the hold time then I realized it's just a matter of disabling midi input to it (see images).

t-bar_001.png
t-bar_002.png
 
Okay, I disabled the "Hold Time" parameter.
The jump after n seconds is no longer there, but unfortunately the slide still doesn't work properly.
The first time I use the slider, the transition happens correctly, the PGM font switches to Pre-View.
If I repeat the operation, nothing happens.
Now, if I make the transition with the on-screen button, the source in Pre-View switches to PGM, but the one that was in PGM doesn't switch to Pre-View.
I have no idea if it's an OBS issue or a plugin issue.
 
I tested the plug-in with an RC version of OBS, the one where they modified the T-Bar's behavior to allow it to be controlled via a plug-in.

I tested it with a VB program and the OBSWebsocketDotNet library and was able to control the OBS T-Bar.

Normal behavior should be that when the T-Bar passes the upper limit, it should return to its initial position.

This doesn't happen in your plug-in; the T-Bar remains stuck at maximum and the transition isn't completed. This is also evident from the fact that the transition buttons in OBS remain disabled.

This is the link to the RC I used for testing

With this issue resolved, I finally think it's time for a nice external physical T-Bar.

Anyway, thanks for the support and for your work.
 
Is there any good documentation about how this works for a simple volume control bind? Before the last update I used an older version, more simple, everything was fine. But with the latest update it looks all different. I managed to get it to work at least to bind the controller (at least the plugin recognizes my midi controler) but no volume change at all on any of my sources. I just need like a 1 minute video to see what I'm doing wrong but nothing seems to work, no matter what buttons I push.
 
Hello

After I updated the rodecaster duo to the firmware 1.7.4 the obs-midi just stoped recognizing the software or the hardware itself, I tried everything, reinstalled the plugging, cleared cache, rode software's too, usb1 is connected to the pc, etc...

Nothing has worked, is there anyone that could help me? The plugging just wont recognize the software, even with the rodes aplication saying that MIDI is working perfectly.
 
It should work. I'm on the 1.7.4 RC2 beta and this plugin is still working for me. Make sure the little power button toggle next to Input Status for "MIDI function" is enabled. That gets automatically turned off for me sometimes.
 
You must log in or register to reply here.
Back
Top