Resource icon

Multiple RTMP outputs plugin 2020-05-17

Go to download
Overview Reviews (74) History Discussion
KattPhloxworthy

KattPhloxworthy

Member
Viforvisonary said:
Hi i have obs installed and the ver is 30. I installed the multistream plug in and ran obs, its not showing up i dont really know what i should do next any suggestions?
obs-multi-rtmp-0.5.0.4-windows-x64-Installer.exe Heres the plugin i installed.
Heres my log file >_>
https://obsproject.com/logs/WNWBwQm2BFINcbsY
Click to expand...

Are you using a systemwide install of OBS Studio downloaded from the site, via Steam, the Microsoft Store or are you using a portable install? I can pretty safely assume the latter one is not true, so any of the former three.

When you install, IT MATTERS where you tell it to put the files. If you're using an "installed" copy, meaning using the installer from the website or from either store, the plugin installer should (operative word here) be able to determine where the program is installed.

So you know, the default is at the base directory/folder in which OBS Studio is installed. The default if you download the OBS Studio installer yourself is C:\Program Files\obs-studio. Use that directory. DO NOT use "C:\Program Files\obs-studio\obs-plugins" or "C:\Program Files\obs-studio\obs-plugins\64bit".

--Katt. =^.^=
 
S

sorayuki

Member
KattPhloxworthy said:
Are you using a systemwide install of OBS Studio downloaded from the site, via Steam, the Microsoft Store or are you using a portable install? I can pretty safely assume the latter one is not true, so any of the former three.

When you install, IT MATTERS where you tell it to put the files. If you're using an "installed" copy, meaning using the installer from the website or from either store, the plugin installer should (operative word here) be able to determine where the program is installed.

So you know, the default is at the base directory/folder in which OBS Studio is installed. The default if you download the OBS Studio installer yourself is C:\Program Files\obs-studio. Use that directory. DO NOT use "C:\Program Files\obs-studio\obs-plugins" or "C:\Program Files\obs-studio\obs-plugins\64bit".

--Katt. =^.^=
Click to expand...
The installer simply inserts files into the system-wide ProgramData folder and not allowed changing the install location.
In this case, I think OBS in portable mode may not load it... and should extract the zip archive to do the installing manually.
 
KattPhloxworthy

KattPhloxworthy

Member
KattPhloxworthy said:
Installs super easily on my setups. Only I have a question:

Just curious, are there hotkey events available to either start and stop streaming on all streams or individual ones? Having these would be super helpful on my setup, notably for automation and events I can send from my SAMMI setup via WebSockets.

Thanks!

--Katt. =^.^=
Click to expand...

Umm... bump?

Thanks in advance.

--Katt. =^.^=
 
R

RottenPinky

New Member
I've searched into this and there doesn't seem to be any available hotkeys. What you can do, however, is to enable the "Sync start with OBS" setting on each of your outputs. That way, when OBS starts or stops streaming to your main output, all the other outputs will do the same.

KattPhloxworthy said:
Umm... bump?

Thanks in advance.

--Katt. =^.^=
Click to expand...
 
KattPhloxworthy

KattPhloxworthy

Member
RottenPinky said:
I've searched into this and there doesn't seem to be any available hotkeys. What you can do, however, is to enable the "Sync start with OBS" setting on each of your outputs. That way, when OBS starts or stops streaming to your main output, all the other outputs will do the same.
Click to expand...

Actually, it starts up just fine; though I'm glad I ran across your post because I forgot to end the encoding session (it takes place on a completely different computer from where stream assembly takes place). It doesn't seem to handle the "stop streaming" event that I can tell. Had this been a single stream, it would have worked (automated event on stream assembly computer tells the encoder to shut down at a particular point).

--Katt. =^.^=
 
N

Nightcrawla

New Member
Hey all, downloaded 0.5.0.4-windows-x64 version for OBS 30.0.2. Two issues I have are, it doesn't save the location of where I docked it in my OBS, so I can dock it in the OBS UI somewhere, but every time I close OBS and open OBS it is undocked and behind another docked item, usually can find it top left of OBS, and the other issue also involves closing OBS and restarting it. The plugin will not save my Target settings at all, have to reenter them every time. I've seen people adding the target then modifying it and changing its Target Name before closing OBS to save the settings on restart, but that doesn't work in this version. Any ideas are greatly appreciated. As always thank you so much for this plugin!
 
KattPhloxworthy

KattPhloxworthy

Member
bluebeard2011 said:
i have tried both ways to install its in my plugings but does not work either way
Click to expand...

Several questions:

1. Which platform are you using this on, e.g. PC or Mac?
2. Which OS are you using, e.g. Windows, Linux or macOS?
3. What are you doing during the installation process, e.g. specifying location to install into for the Window installer, which packaging system on Linux systems?

Also, have you looked under the Docks menu? That's where the Multi-RTMP Output dialog exists.

Having that information would go a long way toward helping you figure out what's happening.

--Katt. =^.^=
 
C

CaPoSno

New Member
I know the plugins naming is "Multi RTMP" but is there any chance that the plugin will also support SRT at some day?
 
You must log in or register to reply here.
Top