Free Animated Lower Thirds with Dockable Control Panel v.1.6

[Guacho09]

Thanks for the reply. Sometimes that works and as you can see in the screenshot, sometimes it doesn't.

View attachment 66708

The LT are in red beacuse the are in INACTIVE time. You can see that in the small square with a number like 114, 112, 110. The upper squares count the active time (which is 0) and the bottom square counts de inactive time.
So, all LT are right now in the inactive state waiting to accomplish the inactive time (which is 420s by default). If you want to reduce this inactive time, you can do it in the main setting, the third box or in each LT in the clock icon. Then, when the inactive time is reached, the LT becomes active again, and so on.

I hope you have understood, if not let me know or watch a video tutorial in our youtbe channel (https://www.youtube.com/channel/UCUYiOIl-DHn8B1eRzUfDyyw)

 

[SilverServerT]

Hi,

Thanks for the amazing producing tool!
I have seen some users/posters wanting to contribute or add some custom stuff.
Would you consider running a github rep? Would make contributing or adjusting for own use really easy.
Sorry just found the github, google didnt connect your forum name with github and I didnt dig properly :)

GitHub - noeal-dac/Animated-Lower-Thirds: Animated Lower Thirds with dockable Control Panel - OBS Tool

Animated Lower Thirds with dockable Control Panel - OBS Tool - noeal-dac/Animated-Lower-Thirds

github.com

Kinds regards,
SilverServerT

 

[Tumelo]

Hi, thank you so much for the video.
I have followed all the steps successfully and I've set up the dock but I'm unable to see the lower thirds. The main setting toggle is on as well as my lower third 1 but nothing shows up on my screen. How can I fix this?

 

[Tumelo]

We need more information to help you. :)
Are you using the latest version of OBS? Windows or Mac? Open both html files in your internet browser (out of OBS). Works?
Go to OBS settings > Advanced > Sources. Check or uncheck "Enable Browser Source Hardware Acceleration" and try it again.
Hope it helps.

I also have the same issue. I'm using the latest version of OBS on Windows. I've set everything up just as it says on the tutorial and everything looks set but the LT doesn't show, even though my main settings and LT1 toggles are live. How can I fix this?

 

[Kishi!]

Memory slot give the possibility to have 10 differents NAME, INFO, LOGOS for one LT. Fox example, in one team of basketball, you can enter all the players name's in the same LT (same configuration) in each slot.
Actions:
- To save something in one slot you have to write name and info and then click over the desired slot.
- To load slot, click over slot with number.
- To remove one slot, keep slot pressed until becomes red.

And that's it, you can view slots in action in this video https://www.youtube.com/watch?v=nKcvu-HwP9k&t=176s.

Hope this helps!

Thank you for your great explanation.

 

[PASS Studio]

how many can we use and can we position this like in the lower center

 

[Mr Medved]

Memory slot give the possibility to have 10 differents NAME, INFO, LOGOS for one LT. Fox example, in one team of basketball, you can enter all the players name's in the same LT (same configuration) in each slot.
Actions:
- To save something in one slot you have to write name and info and then click over the desired slot.
- To load slot, click over slot with number.
- To remove one slot, keep slot pressed until becomes red.

And that's it, you can view slots in action in this video https://www.youtube.com/watch?v=nKcvu-HwP9k&t=176s.

Hope this helps!

Thank you! This helped to understand how to configure to the 10 slots.

 

[Kishi!]

Hi
I saw this new feature on v1.6 on logo size, with style 1 - I've tried to play the size from 1-10 but, I don't see any results different from the logo. Not sure is it my logo issue or my setting problem :?

 

[Guacho09]

I also have the same issue. I'm using the latest version of OBS on Windows. I've set everything up just as it says on the tutorial and everything looks set but the LT doesn't show, even though my main settings and LT1 toggles are live. How can I fix this?

Can you post an image from your dock when all is on and it’s not working please?

 

[Guacho09]

how many can we use and can we position this like in the lower center

Sorry, I can’t understand your question. Can you ask with more detail please?

 

[PASS Studio]

Sorry, I can’t understand your question. Can you ask with more detail please?

first can we lower center it second can we have more than 4 need like 20

 

[Guacho09]

first can we lower center it second can we have more than 4 need like 20

You have 4 LT, each with 10 slots, so you can configure up to 40 LT. You can find in the comments above how the slots work.
You can directly enter an LT with style number 2, but if you prefer the others, you can always use the horizontal and / or vertical margin options to move it as far as you want (See image below)

 

[Bambiuk88]

HI i have done what was said on the video but its not work any one got any ideas please

 

[Guacho09]

HI i have done what was said on the video but its not work any one got any ideas please

Can you give more details or info please? Can you post an image of your dock panel?

 

[Tom Steuver]

Great tool here. Many of my lower thirds are one line so is it possible to disable the Info line from being required?

 

[NoeAL]

Hi
I saw this new feature on v1.6 on logo size, with style 1 - I've tried to play the size from 1-10 but, I don't see any results different from the logo. Not sure is it my logo issue or my setting problem :?

Thanks for the notification. The size of the LT1 logos affects the size of the other LTs logos, this is a bug. It will be fixed in the next update.
You can temporarily fix it by pasting this at the end of the style-source.css file:

#lower-third-1 > .logo img {max-height: var(--alt-1-logo-size)}
#lower-third-2 > .logo img {max-height: var(--alt-2-logo-size)}
#lower-third-3 > .logo img {max-height: var(--alt-3-logo-size)}
#lower-third-4 > .logo img {max-height: var(--alt-4-logo-size)}

Hope it helps you.

 

[NoeAL]

Great tool here. Many of my lower thirds are one line so is it possible to disable the Info line from being required?

Hi! There is a trick you can do:
Fill in the field that you don't want to have text with a "space" and put a high value in the ratio of the size of the text, like 20.
If this value is positive it will show the name text and if it's negative it will the info text.

Hope it helps you! ;)

 

[Bambiuk88]

Can you give more details or info please? Can you post an image of your dock panel?

So when I fill the control panel out it's not sending the names or the logos

 

[Tom Steuver]

Hi! There is a trick you can do:
Fill in the field that you don't want to have text with a "space" and put a high value in the ratio of the size of the text, like 20.
If this value is positive it will show the name text and if it's negative it will the info text.

Hope it helps you! ;)

Nice trick and it worked. Looks good. Thanks!

 

[jxm2012]

Are there any requirements for file type or size when uploading custom logos? I have tried PNG from 300x300 and 50x50 and they will not load. This is what happens after I try to load them. -Thanks