AMD Hardware Encoder(s) [Deleted]

Status
Not open for further replies.
E

Eekk Eekk

New Member
In certain reasons I have an AMD R7 250 GPU, still I can't record basically anything. There's no support for it yet? (plus other VCE 1.0 AMD GPUs.)
 
locodicegr

locodicegr

Member
I recorded Hearthstone and csgo for testing, and worked very well (new obs)
i dont know about other games...will test soon!
Thanks!
 
H

horst

New Member
My recordings always get stuck at 20:48 too. Sound recording seems to be continued though. That happened with all the plugins versions i tried, up until the current one. I have a RX480 with the latest drivers.
 
Suslik V

Suslik V

Active Member
Do you have screens of "Reset to Defaults" and "Update Values from AMF (if at default/-1)" strings for localization (how it looks like and where it apply)?

And what major difference between them? I treat them as absolutely identical things. What "Reset to Defaults" and "Update Values from AMF (if at default/-1)" actually do?
 
D

demiourgos

New Member
I want optimize my streaming configuration and i really am overwhelmed of all the presented settings (even in the "simple-view"). Is there any good wiki or guide which explains what the settings do, so i can get a feeling where to start fiddeling around?
 
Xaymar

Xaymar

Active Member
ball2hi said:
How will we go about updating/using this in the current version of 0.16 by the way, since it comes pre-installed. Will your installer just over-ride/uninstall the current versions?
Click to expand...

The installer will always override whatever files there already are and usually uninstall old versions first (if they were installed).

--

ball2hi said:
This is very bad, I thought the issue was fixed! Maybe I messed with something I should not have. Here is an OBS log:
https://gist.github.com/b0c6864a1e475a5802e5ce52871c4f57

I have the video on my hard-drive, but it's over over 4gigs so I don't know if I could easily upload this somewhere to be easily downloaded. The matches are being scheduled for this Friday/Saturday/Sunday...! Maybe the CABAC option broke it, because I have it force enabled. Currently using the most up to date OBS + that version of the plugin (I uninstalled the plugin before installing the new OBS with the full installer)
Click to expand...
horst said:
My recordings always get stuck at 20:48 too. Sound recording seems to be continued though. That happened with all the plugins versions i tried, up until the current one. I have a RX480 with the latest drivers.
Click to expand...
meredith said:
Same problem here.
Click to expand...
ball2hi said:
Please provide logs like I did so that it makes it easier for @Xaymar to identify if there is a common denominator.
Click to expand...

Please always provide your System Specifications (Motherboard, CPU, GPU, RAM, HDD, ...), the currently installed OBS version, the currently installed Plugin Version (or bundled if you use that version), the last 3 log files and if OBS crashed the last 3 crash files.

--

Eekk Eekk said:
In certain reasons I have an AMD R7 250 GPU, still I can't record basically anything. There's no support for it yet? (plus other VCE 1.0 AMD GPUs.)
Click to expand...
vapeahoy said:
That will never work as that gpu doesnt have VCE support.
Click to expand...

R7 250 does not have a VCE core, see this page for cards that support VCE: https://github.com/Xaymar/OBS-AMD-Advanced-Media-Framework/wiki/Hardware,-GCN-and-VCE-Limits

--

locodicegr said:
I recorded Hearthstone and csgo for testing, and worked very well (new obs)
i dont know about other games...will test soon!
Thanks!
Click to expand...

Sweet, nice to hear.

--

Suslik V said:
Do you have screens of "Reset to Defaults" and "Update Values from AMF (if at default/-1)" strings for localization (how it looks like and where it apply)?

And what major difference between them? I treat them as absolutely identical things. What "Reset to Defaults" and "Update Values from AMF (if at default/-1)" actually do?
Click to expand...

Why are you using the [Advanced] one and asking questions? If you have no reason to use it, use the normal one - most often your setup doesn't need that much control.
Also "Reset to Default" resets everything to the 'not set' value, "Update from AMF" retrieves the current values from AMF if a parameter is set to 'not set'.

--

demiourgos said:
I want optimize my streaming configuration and i really am overwhelmed of all the presented settings (even in the "simple-view"). Is there any good wiki or guide which explains what the settings do, so i can get a feeling where to start fiddeling around?
Click to expand...

https://github.com/Xaymar/OBS-AMD-Advanced-Media-Framework/wiki/Configuration, https://github.com/Xaymar/OBS-AMD-Advanced-Media-Framework/wiki/Tested-Settings
 
Xaymar

Xaymar

Active Member
ball2hi said:
This is very bad, I thought the issue was fixed! Maybe I messed with something I should not have. Here is an OBS log:
https://gist.github.com/b0c6864a1e475a5802e5ce52871c4f57

I have the video on my hard-drive, but it's over over 4gigs so I don't know if I could easily upload this somewhere to be easily downloaded. The matches are being scheduled for this Friday/Saturday/Sunday...! Maybe the CABAC option broke it, because I have it force enabled. Currently using the most up to date OBS + that version of the plugin (I uninstalled the plugin before installing the new OBS with the full installer)
Click to expand...

Remove the GOPSize and CABAC setting, they are marked as Expert/Advanced for a reason.

Edit: Also I literally can't reproduce the issue anymore. It doesn't happen for me even when exactly matching your settings. :/
 
Last edited:
T

TheCasualGuy

New Member
Coming from OBS Studio 0.16.1 where this plugin is part of the program.

One word: Amazing.

Finally I am able to capture videos in full potential of my R9 280x!
 
Suslik V

Suslik V

Active Member
Xaymar said:
...
Why are you using the [Advanced] one and asking questions? If you have no reason to use it, use the normal one - most often your setup doesn't need that much control.
Also "Reset to Default" resets everything to the 'not set' value, "Update from AMF" retrieves the current values from AMF if a parameter is set to 'not set'.
...
Click to expand...
Heh, the question was unclear... I don't have sample of the hardware to test it by myself. Could you spend some time to explain some options to me. Thus I be able to translate them in the right way.

Now, I know that this is under [Advanced] options.

1) 'not set' = 'Default'? from the localization strings (or this is 'Automatic' one?)
2) Default values = initial values? Or Default is something else?
3) And what is the ...current values from AMF...? There is so many code to read everywhere -_-
4) Are "Reset to Defaults" and "Update Values from AMF (if at default/-1)" button and option? I mean, action "Reset to Defaults" and imperative to it is "Update Values from AMF (if at default/-1)"? Or this is two different actions? Or this is not an actions at all...
 
Xaymar

Xaymar

Active Member
Suslik V said:
Heh, the question was unclear... I don't have sample of the hardware to test it by myself. Could you spend some time to explain some options to me. Thus I be able to translate them in the right way.

Now, I know that this is under [Advanced] options.

1) 'not set' = 'Default'? from the localization strings (or this is 'Automatic' one?)
2) Default values = initial values? Or Default is something else?
3) And what is the ...current values from AMF...? There is so many code to read everywhere -_-
4) Are "Reset to Defaults" and "Update Values from AMF (if at default/-1)" button and option? I mean, action "Reset to Defaults" and imperative to it is "Update Values from AMF (if at default/-1)"? Or this is two different actions? Or this is not an actions at all...
Click to expand...

Oh if your question was about properly translating it, this is how each interface looks like.
Advanced:
obs32_2016-09-28_23-57-51.png

obs32_2016-09-28_23-58-31.png


Simple:
obs32_2016-09-28_23-59-46.png


1) 'not set' is literally not set. For some options that is AMF.Util.Default, for others -1 or -11.
2) Default = Not Set, like said before.
3) That depends on the settings that are not at 'not set'.
4) Both of them are checkboxes that act as buttons until buttons are fixed. See the above images for how they look like in action.
 
Suslik V

Suslik V

Active Member
  • Reset to Defaults resets all parameters to initial values (even to 'not set', but there is only numbers, thus substitutes it by '-1')
  • Update Values from AMF sends to AMF available values (presets and so on) and return values for not set (-1) fields.
Close to the truth?
 
H

HydraSP

New Member
Hi there, I'm having an issue with recording that I can't seem to fix. Everything works fine for the first 15 seconds, and then the FPS drops to 45.50 from 60, I've tried a bunch of different settings, the base presets, everything. Nothing seems to fix it, any help would be appreciated.
 
ball2hi

ball2hi

Member
HydraSP said:
Hi there, I'm having an issue with recording that I can't seem to fix. Everything works fine for the first 15 seconds, and then the FPS drops to 45.50 from 60, I've tried a bunch of different settings, the base presets, everything. Nothing seems to fix it, any help would be appreciated.
Click to expand...
@HydraSP
Come on dude, provide a log. We ain't mind readers.
 
Status
Not open for further replies.
Top