Hi, Is it possible to restart multiple media sources on severals scens at same time..i have tried with stop/restart but only stop work.
- Thread starter Warmuptill
- Start date
Yep, typo, using OBS 29.1.3. THANK YOU!
Automatic scene switcher is working great based on left and/or right mics.
To make it look smoother, I have 6 macros with slightly different logic:
Both On, Both Off, Host from Both, Host from Guest, Guest from Both, Guest from Host.
Warmuptill
Active Member
Last edited:
Warmuptill
Active Member
Can you please test if this build fixes your issue?
Midi · WarmUpTill/SceneSwitcher@808f5e6
An automation tool for OBS Studio. Contribute to WarmUpTill/SceneSwitcher development by creating an account on GitHub.
github.com
Let me know if that should be an issue!
Please back up your settings beforehand.
Ok thanks, but I don't understand how to configure it. I found macro properties when I set it to yes it works and if it doesn't it stops working. But what I want to set is that if the midi message changes the port, look for the correct one and assign itCan you please test if this build fixes your issue?
Note that you have to be logged into GitHub to be able to download it.
Midi · WarmUpTill/SceneSwitcher@808f5e6
An automation tool for OBS Studio. Contribute to WarmUpTill/SceneSwitcher development by creating an account on GitHub.
Let me know if that should be an issue!
Please back up your settings beforehand.
example
MACRO 1 - midi - message was recived from [Port #2] iCON iStage V2.01 1
when I restart PC MACRO 1 -midi - message was recived from changes and is now [Port #2] NanoKontrol V1
I need to set MACRO 1 back to midi message was recived from [Port #1] iCON iStage V2.01 1
If you look closely at the PORT, it changes. but the name is the same
Warmuptill
Active Member
The build I shared above is attempting to address exactly this issue by instead of saving / loading the port number trying to save the device name and get the port number from that.
So it would be interesting for me to know if that particular build resolves the issue you just described again or not. :)
You don't need to change any configuration.
Warmuptill
Active Member
Warmuptill updated Advanced Scene Switcher with a new update entry:
Advanced Scene Switcher 1.24.0
Read the rest of this update entry...
Advanced Scene Switcher 1.24.0
Read the rest of this update entry...
FroztySeven
New Member
Hi, i just found this plugin recently and been trying to connect my Twitch account to is so i can access the Twitch Action and Conditions.
First time attempting to connect, it opened up the Twitch page where i could give permissions.
Then, this just shows up in my browser and i can't get any further:
This was tried using Firefox, but i've also tried other browsers and it doesn't like it's able to connect to the plugin properly.
How can i fix this?
First time attempting to connect, it opened up the Twitch page where i could give permissions.
Then, this just shows up in my browser and i can't get any further:
This was tried using Firefox, but i've also tried other browsers and it doesn't like it's able to connect to the plugin properly.
How can i fix this?
Destroy666
Member
Is your 8080 port free? What's the URL that can't be accessed (obfuscate IDs/data)?
AdmiralFunghie
Member
Hi there,
After updating to the latest version, I have an issue with timers.
I noticed this, as I have a logo in a scene that plays for 10 seconds. Previously I had a macro that checks if that logo scene is active, and if it is active for more than 9 seconds it will change to my main camera scene. Now I have to set this figure to 3 seconds in order for the next scene to happen after 9 seconds.
Odd.
So, I made a simple test that shows a taskbar notification after the scene is active for 3 seconds. The taskbar notification doesn't appear until around 10 seconds.
Something seems to have changed here. I don't see this as an issue with a macro that needs rewriting for the new ELSE command. Is it?
Any thoughts welcome, thank you.
After updating to the latest version, I have an issue with timers.
I noticed this, as I have a logo in a scene that plays for 10 seconds. Previously I had a macro that checks if that logo scene is active, and if it is active for more than 9 seconds it will change to my main camera scene. Now I have to set this figure to 3 seconds in order for the next scene to happen after 9 seconds.
Odd.
So, I made a simple test that shows a taskbar notification after the scene is active for 3 seconds. The taskbar notification doesn't appear until around 10 seconds.
Something seems to have changed here. I don't see this as an issue with a macro that needs rewriting for the new ELSE command. Is it?
Any thoughts welcome, thank you.
ah ok ok thanks, i try this. Question, does the latest update 1.24.0 already have this fix?
cah-renan-ferreira
New Member
I was trying to use this plugin to Autoplay an intro video when I hit the record button, and when it finishes, switch to another scene.
I could not find an event for START RECORDING...
Is there any way I can achieve this?
Thanks!!!
I could not find an event for START RECORDING...
Is there any way I can achieve this?
Thanks!!!
cah-renan-ferreira
New Member
Thank you! That works!
Great plugin!
Great plugin!
Warmuptill
Active Member
Thanks for reporting the problem! That sounds very odd indeed!
So far I am not able to reproduce the problem with the TEST macro you shared in your screenshot.
Would you mind sharing a log file of the issue? (With verbose logging enabled and preferably of the simple TEST macro)
Also if it is not too much trouble (and you have backed up your settings!) can you confirm, if the change in behaviour was really introduced with the switch to this new version of the plugin?
Just a wild guess:
Are you maybe using a fancy custom transition type?
Do you observe the same issue using a simple "Cut" transition?
Warmuptill
Active Member
No, 1.24.0 does not include this change as I don't know if it works as expected.
I don't have any physical midi devices and only tested using virtual devices.
This I why I am asking for your confirmation that the problem is really gone :)
The build I shared with you earlier is very similar to 1.24.0 so you should be able to switch between the two without any issues.
FroztySeven
New Member
Yeah i don't think i'm using port 8080 for anything else as far as i am ware of.
I'm not sure i should share the URL here but it's something like "http://localhost:8080/auth#access_token=" and then a bunch of numbers and letters
shocknoble
New Member
I have done a great deal of searching and I am not currently sure if this is possible but would love some help in making it a reality if it is doable!!
Right now whenever I swap to a new game, I edit my "Current Game" audio application capture source to capture the audio of the newly opened window. I thought I would be able to store the title of any fullscreen window as a variable and then plug that into the updated settings of the audio application capture source, but I cannot find a way to store that window title as a variable. Would love some insight/direction here if doable! Thank you so much!
Right now whenever I swap to a new game, I edit my "Current Game" audio application capture source to capture the audio of the newly opened window. I thought I would be able to store the title of any fullscreen window as a variable and then plug that into the updated settings of the audio application capture source, but I cannot find a way to store that window title as a variable. Would love some insight/direction here if doable! Thank you so much!