Free Snaz [Deleted]

Status
Not open for further replies.
S

Secepatnya

New Member
Re: [TOOL] Snaz / Stream pc time-countdown and more live 1.9

Yachak said:
Secepatnya said:
Would you happen to know a cause as to the Snaz output for the clock, in the Snaz window itself it appears fine, but in OBS it sometime blanks out briefly before returning to normal?
Click to expand...

I don't seem to be able to reproduce your problem. U running all latest versions from both obs and snaz ?
Click to expand...

Sorry, was really busy hence unable to thoroughly read through.

Recorded the phenomenon tonight. http://www.youtube.com/watch?v=SxATjNKqLvw

OBS version: 0.612b (also shown in earlier versions too)
Snaz version: 1.9.2.6 (also shown in earlier versions)

Snaz and its output data is on an SD card. The phenomenon also seen if stored on my computer's internal SSD but doesn't seem to be as bad. It doesn't appear if I run it off a HDD, which is not always an option for me due to lack of ports.

At worst, the blanking out can be as long as a whole second. At best, it will blink out for less than a split second as shown in the video.

Here's a second one: Skip to 1 minute and 3:50 respectively in http://www.youtube.com/watch?v=PZnLG2l3S18
Snaz 1.9.2.2 (I think, that was a while back)
OBS 5.2.2
 
T

theonlyshaft

New Member
Re: [TOOL] Snaz / Stream pc time-countdown and more live 1.9

So I see that nightdev has made a twitch follower alert. I was wondering if you could add something similar for twitter? (example http://www.nightdev.com/followalert/)

I really like this plugin and I think this would be a very useful feature! Thanks!
 
P

provet

New Member
Re: [TOOL] Snaz / Stream pc time-countdown and more live 1.9

$ms don't work in chrono up, feature? :P

As you are working on your second version of snaz, you may not do fixes for snaz 1 right?
then please add it to snaz 2 :*
 
A

andsim

New Member
i love Snaz i use just about everything Snaz has offer. thank make this possible
not sure about snaz 2 i just like interface on 1.x
here my twitch channel
twitch.tv/andsim
 
Last edited:
J

JMathers

New Member
hey guys can some one help me with the latest version of Snaz?

i'm trying to use the System info tab.
to display cpu usage n such.
but its all empty on snaz. i tried reloading, restarting. nothing to configure.
it just doesn't seem to fetch the data. at all.
 
B

Bwana

New Member
Yachak said:
Re: [TOOL] Snaz / Stream pc time-countdown and more live 1.6



i dont think its to crazy ... i even think it would be pretty useful :)
So might be a nice challenge and a nice thing to include.
Click to expand...

Just adding to the list of people who want this feature :) I need this exact thing to show a twitter ticker on my stream by hashtag. Was actually looking for something today actually to show E3 tweets on my stream. I had something for xsplit, but it doesn't work on OBS :(
 
L

LionNez

New Member
Yachak I love your tool and would like to ask you kindly for a request. Would it be possible to include a normal counter to increase and decrease it
 
Daddio

Daddio

New Member
Love your program and I am looking forward to the inclusion of Twitch Followers count. If I may add a suggestion, can you add in a simple count down to X number of follower? Currently I am trying to reach a goal of X number of followers and I would love to see a counter, counting down to that X number. Maybe add in a alarm when it hit your goal as well.

Lol PS your app made me stop being a lurker and actually sign up in the OBS forums! Thank you for all your hard work!
 
M

MegnaGaming

New Member
I agree with Daddio above - the app already displays current number of followers, I'd love to see a place where we could display this info on screen (for situations such as xxxx/1000 followers) when setting goals.
 
R

Readygolol

New Member
hi, i have a trouble when open snaz

and already try reinstall but no use

do you know whats wrong with it?


gCaoL2S.png


Code: 
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.Configuration.ConfigurationErrorsException: Configuration system failed to initialize ---> System.Configuration.ConfigurationErrorsException: Root element is missing. (C:\Users\MiSTakE\AppData\Local\JimsApps\Snaz.exe_Url_zmeqnkazxucvd443wbo2dzbp5huwxcy5\1.9.2.6\user.config) ---> System.Xml.XmlException: Root element is missing.
   at System.Xml.XmlTextReaderImpl.Throw(Exception e)
   at System.Xml.XmlTextReaderImpl.ParseDocumentContent()
   at System.Xml.XmlTextReaderImpl.Read()
   at System.Xml.XmlTextReader.Read()
   at System.Configuration.XmlUtil..ctor(Stream stream, String name, Boolean readToFirstElement, ConfigurationSchemaErrors schemaErrors)
   at System.Configuration.BaseConfigurationRecord.InitConfigFromFile()
   --- End of inner exception stack trace ---
   at System.Configuration.ConfigurationSchemaErrors.ThrowIfErrors(Boolean ignoreLocal)
   at System.Configuration.BaseConfigurationRecord.ThrowIfParseErrors(ConfigurationSchemaErrors schemaErrors)
   at System.Configuration.BaseConfigurationRecord.ThrowIfInitErrors()
   at System.Configuration.ClientConfigurationSystem.OnConfigRemoved(Object sender, InternalConfigEventArgs e)
   --- End of inner exception stack trace ---
   at System.Configuration.ClientConfigurationSystem.OnConfigRemoved(Object sender, InternalConfigEventArgs e)
   at System.Configuration.Internal.InternalConfigRoot.OnConfigRemoved(InternalConfigEventArgs e)
   at System.Configuration.Internal.InternalConfigRoot.RemoveConfigImpl(String configPath, BaseConfigurationRecord configRecord)
   at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
   at System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
   at System.Configuration.ClientConfigurationSystem.System.Configuration.Internal.IInternalConfigSystem.GetSection(String sectionName)
   at System.Configuration.ConfigurationManager.GetSection(String sectionName)
   at System.Configuration.ClientSettingsStore.ReadSettings(String sectionName, Boolean isUserScoped)
   at System.Configuration.LocalFileSettingsProvider.GetPropertyValues(SettingsContext context, SettingsPropertyCollection properties)
   at System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider)
   at System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName)
   at System.Configuration.SettingsBase.get_Item(String propertyName)
   at System.Configuration.ApplicationSettingsBase.GetPropertyValue(String propertyName)
   at System.Configuration.ApplicationSettingsBase.get_Item(String propertyName)
   at Snaz.Properties.Settings.get_StartMinimized()
   at Snaz.MainForm.Form1_Load(Object sender, EventArgs e)
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.ContainerControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
Snaz
    Assembly Version: 1.9.2.6
    Win32 Version: 1.9.2.6
    CodeBase: file:///C:/Program%20Files%20(x86)/JimsApps/Snaz/Snaz.exe
----------------------------------------
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Configuration
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Windows.Forms.resources
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms.resources/v4.0_4.0.0.0_zh-Hant_b77a5c561934e089/System.Windows.Forms.resources.dll
----------------------------------------
AutoUpdater.NET
    Assembly Version: 1.2.0.0
    Win32 Version: 1.2.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/JimsApps/Snaz/AutoUpdater.NET.DLL
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
 
Yachak

Yachak

Member
E

error55o

New Member
fantastic software, one request, on Twitch Viewers tab, I'd like to show how many followers I have, I'm using "Viewers = $viewers" at the moment but maybe if $followers could be added this would rock :D I could then use something like "Viewers = $viewers and Followers = $followers"
 
N

nardeus

New Member
Hi everybody.

Here is my problem with snaz :

I have to say it was working perfectly but as I am setting up my rig,; I did some oc and don't know if it is the reason why but I cannot get the pc spec info anymore it is not working.

I have tried to delete the soft, reinstalled, ( I haven t deleted any registry key as I don t know exactly how to find them if I have to do it ? ) So please help to get those spec up again ;-)

Here are some screens showing the problem :

851065snazbug2.png


then snaz info :

283789snazbug3.png
 
S

Slegnor

Member
Hi, love Snaz, it's made my channel so much better with the viewer count option.

I'm just wondering if there's a way to have it start Twitch Viewers auto-magically when the software is loaded rather than having to hit the start button?
 
Status
Not open for further replies.
Top