mfx_err_unsupported / qsv failed to load

R

rockbottom

Active Member
FDI is controlled via the command center. Check to see if it's installed.

www.intel.com

Intel® Graphics Software

Fine-tune your graphics settings with Intel® Graphics Software, featuring seamless optimizations, comprehensive controls, and performance monitoring.
www.intel.com www.intel.com
 
R

rockbottom

Active Member
Look at the link, scroll down the page, looks like it's in the Display Settings

So there was no Intel control center already installed on your system? I've only been using an iGPU for the last 2 years but the control center has always been installed with the driver.
 
R

rockbottom

Active Member
I'm assuming you didn't update the driver as Harold suggested back on Page 1. The installed driver looks like it's about 8 years old. Slim pickens on newer drivers, I'm not sure if the 64-bit driver will work correctly with W10. Support ended years ago.

Intel® Core™ i5-2520M Processor (3M Cache, up to 3.20 GHz) Downloads, Drivers and Software | Intel

Intel® Core™ i5-2520M Processor (3M Cache, up to 3.20 GHz) - Download supporting resources inclusive drivers, software, bios, and firmware updates.
www.intel.com www.intel.com
 
ldjts

ldjts

New Member
rockbottom said:
I'm assuming you didn't update the driver as Harold suggested back on Page 1. The installed driver looks like it's about 8 years old. Slim pickens on newer drivers, I'm not sure if the 64-bit driver will work correctly with W10. Support ended years ago.

Intel® Core™ i5-2520M Processor (3M Cache, up to 3.20 GHz) Downloads, Drivers and Software | Intel

Intel® Core™ i5-2520M Processor (3M Cache, up to 3.20 GHz) - Download supporting resources inclusive drivers, software, bios, and firmware updates.
www.intel.com www.intel.com
Click to expand...
Thank you for your help, I finally figured it out.
To anyone who has the same problem with intel i5-2520M, you have to manually downgrade your driver to 9.17.10.4229.
At first, I had intel driver 9.17.10.4459, I downloaded Intel® Driver & Support Assistant to auto scan my driver and it shows "no supported driver or software updates are available for your system.".
I manually downgraded my driver to 9.17.10.4229 on this link Download Intel Drivers because this version is the latest one on Intel download website, and the qsv option finally pop out.
Special thanks to @rockbottom @Harold !
 
R

rockbottom

Active Member
Nice! Hopefully the OP is still watching the thread.

Disable the automatically check for updates feature in OBS so there's no temptation down the road.
 
lazuee

lazuee

New Member
16:17:49.723: [qsv encoder: 'msdk_impl'] Specified object/item/sync point not found. (MFX_ERR_NOT_FOUND)
16:17:49.723: [qsv encoder: 'simple_video_recording'] qsv failed to load
16:17:49.723: major: 1
16:17:49.723: minor: 0
16:17:49.723: interval: 1
16:17:49.723: GopPictSize: 0
16:17:49.723: g_pts2dtsShift: 0

i'm using v.30.0.1
 
Suslik V

Suslik V

Active Member
@lazuee for new OBS you need new hardware
see for details:

OBS 30.0 can't start QSV recording anymore

I've been using QSV recording with OBS for many prior versions on Windows 10, but when I tried installing OBS 30.0 today my recordings will not start. I noticed in the recording settings screen there are now 2 different QSV options, one of them says "deprecated" which was what mine was initially...
obsproject.com obsproject.com
 
lordkek3000

lordkek3000

New Member
I have the exact same problem, thank you for this thread. Indeed seems like an old hardware issue (my laptop is close to 10 years since purchase)
Last year rolling back to from version 30.x to version 27.x used to work for me, but now it's not anymore, even after uninstall
 
You must log in or register to reply here.
Top