skyrock2610
New Member
Where are all these dirt cheap Vision cards coming from and how do I get one?! heads off to eBay
![[unsupported] Datapath Vision Capture](/forum/data/resource_icons/0/1.jpg?1394715264){kind=icon}
- Thread starter Muf
- Start date
HydraulicTater
New Member
So if the e1s really can do ~250MHz pixel clock with the patched nvidia driver and the HDMI to DVI set up, does that mean it can do 1440p60Hz? In CRU it sayth that would only require 242MHz pixel clock. Anyone care to give it a try before I pull the trigger on one?
Boildown
Active Member
I use a DVI-DL now so I can't test it myself, but I agree that the math agrees that the E1S I had should be able to do 2560x1440p60. That's less pixels per second than the 1920x1080p115 that I was able to get it to run at.
Got an E1 in a capture machine recently that I'm now trying to get to work, all the links to the plugin download seem to be dead so I'm wondering if anyone can help me out with that and post a link the latest version, and I guess any other info I might need to get it working properly.
Boildown
Active Member
I messaged Muf to see if he'll reupload it and update the OP. If he doesn't in a reasonable amount of time I'll dig up the file on my hard drive and upload it somewhere. Strictly speaking the source code is still there and you could recreate it from that (but I've never done that before and would be hard-pressed to learn how).
pzlate
New Member
I'd also appreciate a re-upload. I want to see if this plugin will let me get away with upscaling my capture with the card. If I set a capture resolution to 1440x480/240, it'll clean up some issues I get with low res capture. It works perfectly in vision window, but OBS/Amarec only displays a quarter of the capture and I'm unable to adjust it to fit.
Boildown
Active Member
I've never had that problem. You don't need the plugin and it only runs on 32bit OBS Classic anyways.
Boildown
Active Member
Here's the re-upload:
DatapathPlugin-20130903-32R
From here: https://md5file.com/calculator I get...
DatapathPlugin-20130903-32R.rar (application/x-rar-compressed) - 125838 bytes
MD5 dfd951e0eabc62f2e7fcf1f183b6026b
SHA-1 45364246c14abb9b9248cf204db1499a3ab06fb1
SHA-256 d08c782f7df7b1cb2baeca60d62464d5f45d54933e39daea3f77af8545751593
DatapathPlugin-20130903-32R
From here: https://md5file.com/calculator I get...
DatapathPlugin-20130903-32R.rar (application/x-rar-compressed) - 125838 bytes
MD5 dfd951e0eabc62f2e7fcf1f183b6026b
SHA-1 45364246c14abb9b9248cf204db1499a3ab06fb1
SHA-256 d08c782f7df7b1cb2baeca60d62464d5f45d54933e39daea3f77af8545751593
Last edited:
pzlate
New Member
Did you download the drivers from Datapath?
Also thanks for the reup
It's a real shame development stopped before deinterlacing support was added, this does exactly what I need it to do but I need it for an interlaced source.
What would I have to do to get someone to port this plugin to OBS Studio so I can have deinterlacing.
Last edited:
Boildown
Active Member
I wouldn't count on it. Muf was the only one interested in making the plugin and no one has stepped up since he said he wasn't going to make a version for OBS Studio. So you should plan on it never happening. That's the way open source software works for better or worse. We were lucky to get this at all.
Boildown
Active Member
Random Ebay browse today... used E1S, more than 10 available, just $117 USD: http://www.ebay.com/itm/112198559131 ships worldwide.
Pretty killer deal (I have no association with the listing, I just noticed it).
Edit: Actually looks like the same auction listing I posted about in February, except now it says they're E1S instead of E1, and its $43 cheaper.
Pretty killer deal (I have no association with the listing, I just noticed it).
Edit: Actually looks like the same auction listing I posted about in February, except now it says they're E1S instead of E1, and its $43 cheaper.
Boildown
Active Member
Down to $78 and change. Seems they have an inexhaustible supply of used E1S capture cards. https://www.ebay.com/itm/112198559131
yanis31
Member
- so far wasn't able to get the plugin working on 32bit classic (latest) with my E1s... it shows first frame and freezes there,
studio was picking up the card but showed no image at all, somewhere up until the point when i created a custom resolution in the EDID (i just upped the pixel clock to 165hz on a regular 1920x1080 rez and it started to work,
also mine was showing glitched image, sort of partial color information with a single link DVI cable, Dual Link works great.
studio was picking up the card but showed no image at all, somewhere up until the point when i created a custom resolution in the EDID (i just upped the pixel clock to 165hz on a regular 1920x1080 rez and it started to work,
also mine was showing glitched image, sort of partial color information with a single link DVI cable, Dual Link works great.
AlbertHamik
New Member
I've had bad luck with the E1 thus far. I installed the card into my machine and it's not detected by Windows 7. Has anyone else had this issue? I put it into the one 8x slot I had available. Not sure if it's my motherboard or Windows 7 that is the problem.
Last edited: