OBS Setup Expert

Hi there. Where can we hire an OBS expert? We have 7 studios and one of them is completely shitting the bed like once a week. We can't figure out what's going on and I've had to refund so many people. It's driving me crazy and we need to hire someone asap. Any thoughts on how to go about this?
 
Happy to help — this is exactly the kind of thing I do.

Quick context so you can judge whether I'm useful: I diagnose OBS setups from logs rather than guessing, and I've built OBS tooling (Lua scripts, capture pipelines, automated scene control). What you're describing — one studio failing roughly weekly with refunds on the line — is almost always one of a small number of causes, and the log will tell us which.

The single most useful thing you can do right now, before hiring anyone:

In OBS, go to Help -> Log Files -> Upload Current Log File, and paste the link here. Do this on the studio that fails, ideally right after a failure.

That log contains the encoder actually in use, the hardware, the exact error, and whether the problem is encoder overload vs. network vs. capture. Without it, anyone you hire — including me — is guessing.

A few questions that would narrow it down fast:

  • When it "shits the bed", what actually happens? Stream drops entirely, frames drop but stays up, OBS freezes, or the whole machine locks?
  • Are all 7 studios the same hardware and the same OBS version, or mixed?
  • Did it start after an update (Windows, OBS, or GPU driver)?
  • Does the failing studio do anything different from the other 6 — different camera, different scene, longer sessions?
  • What's the output resolution/fps and encoder on the failing one?

One thing worth flagging early, because it saves people weeks: a very common cause of "fails about once a week, no obvious pattern" is thermal or power-related throttling on laptop-class hardware, or a USB capture device dropping off the bus under sustained load. Both look like OBS problems in the log but are not fixed by changing OBS settings. If that turns out to be it, I'll tell you straight rather than sell you tuning you don't need.

If you'd rather go straight to hiring: I'm available, and I'd start with a paid log diagnosis of the failing studio (fixed fee, delivered within 24h) before touching anything else. That tells you whether it's a config fix or a hardware replacement, so you're not paying someone to guess.

Post the log link and I'll take a first look at no charge.
 
Back
Top