Beam

Beam v1.1.0

Go to download
Overview Updates (26) Reviews (5) History Discussion
P

Polyh3dron

New Member
One question for @YorVeX : I see that development of this plugin goes back to at least 2023 and you did mention the potential implementation of NVENC way back then. Are there any plans to do this? Seems like doing a 4K60 HDR capture might be a prohibitive CPU load as it stands which could hinder gaming performance, even on a high-end CPU like the 7950X3D in my gaming PC. Will give it a shot on some demanding games either way though.
 
P

Polyh3dron

New Member
Now that I've tested it out a little, it seems I'm having trouble grasping how to get this whole fixed delay thing working properly. Any tips? Also, the HDR seems washed out in my receiver as opposed to what is being sent out, and all of my P010 and Rec 2100 settings are correct on both ends. My Elgato 4K X seems to be handling the HDR just fine on the other hand.
 
KattPhloxworthy

KattPhloxworthy

Member
Polyh3dron said:
Can't believe I just found this now. I've been searching for a dual PC HDR streaming solution that still allows me to use my DisplayPort monitor forever. Will be trying this out soon, and thank goodness for my 10Gb and 5Gb NICs on my gaming and streaming PCs respectively.
Click to expand...

I know of 2.5 and 10 gigabit ethernet, but I've not heard of 5 gigabit ethernet. If you are going point-to-point, you might want to make sure that the 10 gigabit card can handle 5 gigabit. My Cisco Nexus is pretty old (think 2013), so it won't likely accept 2.5 or 5 gigabit devices.

That aside, I have plenty of experience of running multiple devices on the same network, pushing lots of Beam across the aforementioned Cisco Nexus.

--Katt. =^.^=
 
P

Polyh3dron

New Member
KattPhloxworthy said:
I know of 2.5 and 10 gigabit ethernet, but I've not heard of 5 gigabit ethernet. If you are going point-to-point, you might want to make sure that the 10 gigabit card can handle 5 gigabit. My Cisco Nexus is pretty old (think 2013), so it won't likely accept 2.5 or 5 gigabit devices.

That aside, I have plenty of experience of running multiple devices on the same network, pushing lots of Beam across the aforementioned Cisco Nexus.

--Katt. =^.^=
Click to expand...
My Netgear switch handles both NICs just fine.
 
You must log in or register to reply here.
Top