ATEM Pro Live picture error

JonasP.

New Member
Good evening,



we have the following live set up.



From the Atem Extrem Pro via USB to a laptop (I7-8550U 1.8 GHz processor, Radeon RX550 graphics card and 16 GB RAM) to OBS Studio. The image arrives flawlessly in the Atem. After a certain time, picture errors occur in OBS. There are no real picture errors due to skipped frames. These errors are sometimes more severe and sometimes not so severe. When we started the programme via Admin we had the feeling that it was better but still not completely gone. We have already changed the USB cable. During the live transmission, no other programme is open on the laptop and it has a maximum load of 30% of the CPU and GPU.



Does anyone know the problem and can help us?
 

Attachments

  • IMG_8E2A71091B18-1.jpg
    IMG_8E2A71091B18-1.jpg
    294.6 KB · Views: 4
  • IMG_8E2A71091B18-2.jpg
    IMG_8E2A71091B18-2.jpg
    311.1 KB · Views: 4
  • IMG_8E2A71091B18-3.jpg
    IMG_8E2A71091B18-3.jpg
    249.4 KB · Views: 4
Top