Question / Help 2 Elgato one pc with OBS stream?
- Thread starter l3adjoker
- Start date
Boildown
Active Member
Maybe @LtRoyalShrimp can help, he's a rep from Elgato that frequently responds to posts on these forums.
Videophile
Elgato
Hi, thanks for pinging me.
You cannot use 2 HD60's at the same time.
The only devices that have experimental multi-device support are the HD60 S and HD60 Pro.
Here are configs that work:
2x HD60 = No
1x HD60 + 1x HD60 S = Yes
1x HD60 + 1x HD60 Pro = Yes
2 x HD60 S = Yes
2 x HD60 Pro = Yes
1x HD60 S + 1x HD60 Pro = Yes
You cannot use 2 HD60's at the same time.
The only devices that have experimental multi-device support are the HD60 S and HD60 Pro.
Here are configs that work:
2x HD60 = No
1x HD60 + 1x HD60 S = Yes
1x HD60 + 1x HD60 Pro = Yes
2 x HD60 S = Yes
2 x HD60 Pro = Yes
1x HD60 S + 1x HD60 Pro = Yes
FerretBomb
Active Member
On Mac, you'd have to use the Elgato software to run the capture devices, then Window Capture that software with OBS Studio. Elgato doesn't provide proper drivers on the Mac side (yet?) to allow direct capture by OBS.
So now i red to set up The elgato hd60s and the elgato hd on one pc with obs BUT the hd60s is only shown as "elgato helper device (unavailable).. I read this post https://obsproject.com/forum/threads/elgato-helper-device-unavailable-tried-everything.48217/
But it wasnt helpful cause I want them both working on one pc...
Pls tell me how I can do it !
But it wasnt helpful cause I want them both working on one pc...
Pls tell me how I can do it !
Videophile
Elgato
You don't need to post twice.
Download and install this driver - http://e.lga.to/MultiHD60S.
Re-plug the HD60 S and now in OBS, the HD60 S should show up as "Elgato Game Capture HD60 S(Video)(#01)".
Please don't necro old threads for the sake of a simi-relevant question. Start a new thread in the proper forum that your question is applicable.
Boildown
Active Member
Was fairly ok in this case, but @Xenmic, if you create a new post, draw @LtRoyalShrimp 's attention to it with the @ symbol before this username, as above, and put a link to this thread, and then your question.
Anyways, since this is working on the driver level, I'd expect it to work for OBS Studio too, you can try it and find out the hard (but quick) way.
Sven Power
New Member
is a setup with three elgatos possible?
I tried one HD60 pro and one HD60s - works perfect!!!
Then I bought a second HD60s - works not stable
Will 2 HD60 pro and 1 HD60s work?
I tried one HD60 pro and one HD60s - works perfect!!!
Then I bought a second HD60s - works not stable
Will 2 HD60 pro and 1 HD60s work?
tiagoxoi
New Member
@LtRoyalShrimp thank you so much for your attention.
I currently own a el gato hd. Can I use it combined with any other model on the same el gato software? How many more can be used simultaniously and which models can be used that way?
I want to stream video from two cameras to the same youtube live streaming session.
Thank you very much
I currently own a el gato hd. Can I use it combined with any other model on the same el gato software? How many more can be used simultaniously and which models can be used that way?
I want to stream video from two cameras to the same youtube live streaming session.
Thank you very much
Last edited: