PTZ Controls v0.15.4

This has been a very useful plugin. Thank you so much for sharing it! We use it weekly in our church services.

This is a great plugin which works exactly as expected. Thank you!

Really nice and FREE plugin! I was able to control my old two Sony cams with Visca over serial protocol, right inside OBS without needing any external software. There's room to improvements of course, but really nice work indeed.

Great tool, developer has got VISCA over IP working to help with many PTZ cameras

It's not working for MAC.
Pre5, the version in which USB was released, simply does not appear in OBS after installation.
IOS Monterey Macbook AIR 2017.
Before USB charged

Macbook Air M1 2020
MacOS Monterey (12.4)

I had to use v0.10.2 to get the PTZ controls to show up. Great product! Do you have any plans to add joystick or controller functionality? That would be awesome, as I like to control my cameras through an XBox controller.

Thanks!

works excellent with rgblink ptz camera!

You are a legend for creating this much needed tool. Working great with Visca over IP with Minrray and Jimcomm NDI PTZ Cameras. Really excited to see where this goes!

My most important OBS plugin. Working great with RGBlink PTZ network cams. Unfortunately not compatible with OBS 28 yet. Pre5 crashing OBS. ..M1/M1Pro Mac, Ventura/Monterey.

Everything fine now. Thanks for sharing. Great Plugin

Great Plugin works good with my cams.
would be great if there would be a standalone version and the possibility to control focus and iris

Just excellent. Rely on it all the time.

One question. Is there a way to rename the devices so I can tell which one is which (we have four that I'm controllinng through it !)

Thanks so much for this resource. It's really sensational.

I need a feature to slow down "PAN/TILT" for right side and left side of PTZ NEIOD camera (VISCA)

I love this plug-in! Works great with one of my IP cameras. I have another PTZ camera (Roc20 by Rocware) that connects only with USB. The camera responds if I go to the source, properties, configure video, camera control within OBS.. I have not been successful configuring it with this plugin so wondering if it is even possible?

I am really thrilled and happy about this excellent plugin. I compiled it on Linux and it works like a charm. The only hurdle was to figure out the correct port to be used.
One big wish I have, please could you split the layout vertical instead of horizontal, so that the preset list fills two quarters from top to bottom and the camera list fills only one quarter bottom left?
I believe that most users won't need more than 8 cameras, but 16 presets are very much needed. If the presets fill two quarters on the right, they can be accessed much quicker because there's likely no need to scroll anymore.
Regards Benno

***The speed slider has been removed entirely and the speed of movements starts small, and ramps up the longer the button is held down. This behaviour appears to be more user-friendly, but I would like to have feedback on how it is working.***
Review: The intention was good. However, I liked the previous speed control better. It seems more practical to me. Perhaps it would be interesting to leave both options available, to be chosen in the settings.

***The other big change is in how a PTZ device is associated with an OBS source. ***
Review: This is great! Excelent idea.

Nao sei o que esta acontecendo mas nao consigo configurar a camera, sempre que tento ela esta fechando meu OBS na parte de aplicar as configurações, podem me ajudar ?

I'm not sure where the problem lies but I think it is with this plugin. OBS minimizes and you can't open it and when you open OBS again it says the program is already running and asks if you want to launch it again. OBS appears in the minimized tray and then disappears and you can only close it by going into the task manager tray. Otherwise its a great plugin. Wish instructions for connecting an NDI camera clearer.

I can’t think of any other way I can manage our setup with 4 ptz cameras without this plugin. Only reason for less than a five rating is because currently VISCA serial is not working with two HuddleCam HD connected via usb in OBS 29 and above. Had to downgrade to OBS 28.1.1 because this plugin is important for me.

Does not work on macOS Monterey and OBS 27.1.3
The plugin does not appear in the doks