Casey Bennett
New Member
Hello Obs community,
I've been having some real trouble with my Logitech c920 working with obs. Whenever I start up obs and either do a window capture of the logitech software or use the webcam as a video capture device the webcam always freezes up or scrambles til I go back to the window and switch the mode.
To troubleshoot this I've done a lot of things. I've swapped USB ports both 2.0 and 3.0. I've plugged in to a usb hub that is powered thinking it could be a bandwidth/pwer issue. I lowered all my settings to the absolute lowest and turned off the auto light filters on the camera. I've even went out and bought another c920 and brought it home to find it doing the same exact thing.
I have to believe at this point its a setting in obs that is causing the issue or faulty usb bus in my motherboard. I should also note that while I'm streaming my usb hubs on the rear and front cut out for 2-3 seconds every several minutes if I have webcam going. Also my microphone probably takes a good amount of power (Rode Podcaster).
I'm at my wits end and considering just reinstalling obs from scratch and loading in my profile that way my settings go back to optimal. Please help!
Link to log
https://obsproject.com/analyzer?url=https://gist.github.com/585699d3f9486bd922c6
*Note I did replug my rode podcaster back in during this recording and it doubles as my soundcard.
I've been having some real trouble with my Logitech c920 working with obs. Whenever I start up obs and either do a window capture of the logitech software or use the webcam as a video capture device the webcam always freezes up or scrambles til I go back to the window and switch the mode.
To troubleshoot this I've done a lot of things. I've swapped USB ports both 2.0 and 3.0. I've plugged in to a usb hub that is powered thinking it could be a bandwidth/pwer issue. I lowered all my settings to the absolute lowest and turned off the auto light filters on the camera. I've even went out and bought another c920 and brought it home to find it doing the same exact thing.
I have to believe at this point its a setting in obs that is causing the issue or faulty usb bus in my motherboard. I should also note that while I'm streaming my usb hubs on the rear and front cut out for 2-3 seconds every several minutes if I have webcam going. Also my microphone probably takes a good amount of power (Rode Podcaster).
I'm at my wits end and considering just reinstalling obs from scratch and loading in my profile that way my settings go back to optimal. Please help!
Link to log
https://obsproject.com/analyzer?url=https://gist.github.com/585699d3f9486bd922c6
*Note I did replug my rode podcaster back in during this recording and it doubles as my soundcard.