Stutter/Jitters in my streams / recordings

R

Roootsyy

New Member
Hi Guys,

Fairly new streamer here. I'm having issues with Jitters/ stutters on my streams/recordings and Twitch VODs. These aren't there 24/7 but are appearing almost every 5-10 seconds or so and are then lasting for a second or two before settling. This continues to happen and is ruining my stream quality/content creation. I'm streaming from my PS5 to my laptop with an Elgato 4KS I was wondering if anybody had any suggestions for me, please. I'll list my PC Specs, OBS Settings, & things I've tried below. When streaming, I've had the obs stats tab up, and its showing 0.0% frame rate and encode issues. I can alos post my PS5 settings if required. My Elgato settings are set to record in 1080p 60 fps, the same as my OBS. I have tried to drop the fram rate to 59.54 but this also did not fix this issue as well as changing bitrates.

PC Specs:
Processor AMD Ryzen 7 7735HS with Radeon Graphics (3.20 GHz)
Installed RAM 16.0 GB (15.2 GB usable)
Device ID 0686467C-453F-48FF-9321-156777841477
Product ID 00326-10000-00000-AA764
System type 64-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display
Windows 11

OBS settings:
1769113444096.png
1769113465256.png
1769113476827.png

1769113489269.png


Elgato obs settings:
1769113872817.png
1769113888101.png


Should I be using Nvenc or maybe use AMD?

Many Thanks.
 
It seems like rendering lag Andor encoder overload but need a log from a stream Andor recording where it happened.
dodgepong

Thread 'Please post a log with your issue! Here's how...'

OBS Studio creates a log file each time you run it which contains very useful diagnostic information. Without a log file, it's much harder for any support volunteers to figure out problems and your post may be ignored.

To upload a log file, go to the Help menu > Log Files > Upload Last Log File. "Last Log File" is for the last session (the last time you ran OBS). In some cases you may be asked to select "Current Log File" instead, which is for the current session.
1744134625077.png



Click on the "Copy URL" button to copy the link to your clipboard, then paste the link in your forum...
  • Like
 
qhobbes said:
It seems like rendering lag Andor encoder overload but need a log from a stream Andor recording where it happened.
dodgepong

Thread 'Please post a log with your issue! Here's how...'

OBS Studio creates a log file each time you run it which contains very useful diagnostic information. Without a log file, it's much harder for any support volunteers to figure out problems and your post may be ignored.

To upload a log file, go to the Help menu > Log Files > Upload Last Log File. "Last Log File" is for the last session (the last time you ran OBS). In some cases you may be asked to select "Current Log File" instead, which is for the current session.
1744134625077.png



Click on the "Copy URL" button to copy the link to your clipboard, then paste the link in your forum...
  • Like
Click to expand...
Hi there,

Thanks very much for your reply and willingness to help.


This was the log i ran last night and had issues.

Since this, i have removed OBS and stream elements and re installed OBS. Created a new scene and added each source but still seem to be having the issue. I've tested my Elgato studio software on recording, and it appears to work much better throught that.

Should i change my laptops refresh rate to 60hz to match my 1080p 60fps rather than using 165hz?

any other suggestions would be appreciated.

Many thanks
 
You must log in or register to reply here.
Back
Top