Move

Move 3.2.0

Download
Overview Updates (105) Reviews (124) History Discussion
I'm using an Audio Move filter to make the Glow filter on my webcam react to the volume of my mic. It had been working fine for a while, but recently, I noticed the following:

If the Audio Move filter is disabled when I start up OBS, everything is normal, and when I enable that filter, it works normally while OBS continues running.

But the next time I close and fire up OBS, my webcam stops working (as in no image) completely, with the 'current log' showing the attached, happening constantly over and over (apparently updating webcam settings constantly/infinitely), while my webcam light flashes on and off, as if the webcam is being constantly turned on and off.

If I then disable the Audio Move filter and restart OBS, the webcam is back to normal, and again, in the same 'session', the Audio Move filter works perfectly, if enabled again, without anything happening to my webcam.

Anyone have any idea why this is happening, and how to fix it? I'm going crazy over this...

The configs for the two filters in question, as well as the log, are below:

audio_move.png
glow_config.png

log.png
 
Hey Exeldro! Whats the most easy way to setup a continous animation with some easing for a source ?
I think it can be done with 2 animation filters on the source which are calling each other when they end + 1 starting animation filter for reseting the position to the starting position = 3 filters ?

I simply want to move a source up and down with smooth easing in a continous way.

Isnt there an easier way to like only use 1 filter for such continous animation ? That would be aweseome and super easy to use to animate plenty of sources.
 
Got a 2nd question: I have 2 scenes with a sidebar, where elements have just slightly changed Y values. When switching from sidebar1_scene to sidebar2_scene, the move transition makes a smooth animation to the new Y location as intended.
But how I can make that animation work when sidebar1_scene and sidebar2_scene are both in a scene? so its like disabling sidebar1_scene to enable sidebar2_scene, while getting that nice transition animation ?
 
I think I found a bug in 3.1.5.
In the Disappearing items section, the effects of setting the Position value to Left/Top Left have the same effect, sending the disappearing item to the top left. The same is true for Right/Top Right, where both values also have the same effect and send the disappearing item to the top right.

https://imgur.com/a/P1iLKiD
 
@errornosignal by default sources have top left positional alignment. By choosing the left or right option without top, center or bottom, the source keeps the same Y position of 0 in this case. Combined with a zoom to 0% of the source size it will go to the top. So everything I see in that example is expected behavior to me.

Things you can try to see if that is more what you want:
  • set zoom to 100% instead of 0%
  • set position to center left instead of left
  • set the positional alignment of the source to center
 
@Exeldro Any idea about this? I've been disabling the filter before closing OBS as a workaround, but I'd like not to have to do that, lol.

Also submitted an issue on the github about it. Thanks in advance!
 
Hi, could it be possible that when we change the name of a source, the move source transform field stops resetting? I love the plugin but its a massive huge pain getting everything broken because I changed the name of a source, if I need to change the value of transform I'll do it myself (99.99% of the time I want the value to remain the same). Please :(
 
I've just started using this plugin and love the effect but have run into an interesting quirk. I have multiple sources with the same name as they are references to the same source, a webpage with multiple camera views on it. Each one of the sources has a unique Source ID, though, that I can see and automate with through SAMMI. Each reference has different cropping and placement as they're grabbing different camera feeds. In two different scenes the same sources have the same cameras displayed with the same source IDs (verified through automation via SAMMI), but when Move transitions between the scenes some of the camera sources get mapped to other cameras and the cropping gets transitioned so that the view of the webpage moves.

Could Move be modified to use the Source IDs to match sources instead of just names so that this doesn't happen?
 
Moving text intricacies?

Hello all! I've gotten to be relatively decent with this plug in, and feel like I'm getting close to figuring out how to make this work, but nothing yet.

What I'm trying to accomplish has to have multiple moving text lines that include a scroll that populate after the one before is complete. I'd like to have my text either move in using a Move Source in the scene (come in on screen and resetting it off screen hidden) or have it populate with the type "typewriter" effect inside a Move Value filter on the text source, then have it begin it's scroll after it's finished appearing on screen, get through the scrolling text (which I've attempted to implement with a Move Action and simultaneous start with the Move Value after a specific setting), and finally populate another set of text using the same format after the first is complete.

Has anyone tried getting intricate with the move plug in and text specifically?
 
Hi, with the latest update to OBS 32, Move has disappeared from all transitions. I've tried uninstalling it, reinstalling the latest version, and even installing older versions, but it still doesn't appear.

Can anyone help me?

Many thanks in advance, and especially to the community of creators who improve our experience every day.
 
Atari_Sensei said:
Hi, with the latest update to OBS 32, Move has disappeared from all transitions. I've tried uninstalling it, reinstalling the latest version, and even installing older versions, but it still doesn't appear.

Can anyone help me?

Many thanks in advance, and especially to the community of creators who improve our experience every day.
Click to expand...
"After updating the move plugin click the plus icon in the scene transitions dock to add your Move transition back."
 
badasafish said:
"After updating the move plugin click the plus icon in the scene transitions dock to add your Move transition back."
Click to expand...
Oh my god... I feel like a complete idiot... I've never lost it before even when updating, but I don't know how that didn't occur to me... Sorry for the inconvenience and thank you so much for the help, now it's etched in my brain.
 
Hey guys! I'm having trouble with setting up my Move Plugin Extension. I set the options for appearing and disappearing items both to 'Position: None' and 'Transition:Fade', but my sources are still coming in from, and exiting off to the side diagonally. I even tried to put Filters on the sources for "move transition override" but the problem persists, so i deleted them to no effect. I was sure to check the popup menu for any other transitions or changes but i cant seem to find anything. Anyone know why my stuff wont stay put? Thankyou far any help!
 
gasstationboxers said:
Hey guys! I'm having trouble with setting up my Move Plugin Extension. I set the options for appearing and disappearing items both to 'Position: None' and 'Transition:Fade', but my sources are still coming in from, and exiting off to the side diagonally. I even tried to put Filters on the sources for "move transition override" but the problem persists, so i deleted them to no effect. I was sure to check the popup menu for any other transitions or changes but i cant seem to find anything. Anyone know why my stuff wont stay put? Thankyou far any help!
Click to expand...
Nevermind, sorry. I figured it out, it was the Zoom checkbox.
 
Not sure if it's just me, but when I updated my OBS recently to 32.0.1, it made the FPS go all the way down to 2 FPS in the client, but if I remove this plugin from my OBS, it would stop lagging and would go back to 60 FPS. When I decided to downgrade back to 31.0.0, it was now fine with the plugin. So I don't really know…
 
Is the "Move Video Capture Device" only available in the Windows OBS plugin? Because when I added the plugin to Mac, it is not showing that. Can anyone confirm, please? thank you
 
I'm brand new to the plugin and I know what I want to make happen... I Just don't know how.

I have four scenes:
  • Me: this is a "source scene" which contains my webcam capture
  • Slides: this is another "source scene" containing a window capture of my presentation slides
  • Stage: this is a "live scene" which contains Me
  • Preso: this is a "live scene" with Me (shifted over a bit) and Slides filling the empty space next to Me
Does that make sense?

The idea is that, when I transition from Stage to Preso, I'd like my live image to slide over and the presentation to slide in from the side. Then, when I transition back to Stage, I want the opposite to happen.

Can someone help me make this happen?
 
You must log in or register to reply here.
Back
Top