Question / Help Microphone is to quiet

blaxxz

New Member
Hi,

sry for the English.

You can not hear me in the stream. Everything is 100%. The same problem I have in Xsplit. Under recording devices in Windows 8.1, the level barely goes up also.
So I'm assuming that something is not on the Windows settings in order.

The last thing I had done was to install a webcam.

The level in my headset is set to 100%. However softly.

Sound drivers uninstalled and installed = no success.
Disconnected and disabled = no success webcam

Is it possible that the 100 level is not really 100?


I still have another headset but tasted the same effect.

Had anyone been such a problem?



Man kann mich im Stream nicht hören. Alles ist auf 100%. Das gleiche Problem habe ich auch in Xsplit. Unter Aufnahmegeräte in Windows 8.1 geht der Pegel auch kaum hoch.
Also gehe ich davon aus, dass irgendwas an den Windows einstellungen nicht in Ordnung ist.

Das letzte was ich gemacht hatte, war eine Webcam zu installieren.

Der Pegel bei meinem Headset steht auf 100%. Jedoch leise.

Soundtreiber deinstalliert und installiert = Kein Erfolg.
Webcam abgesteckt und deaktiviert = Kein Erfolg

Ist es möglich, dass der pegel von 100 nicht mehr wirklich 100 ist?


Habe noch ein anderes headset probiert aber gleicher Effekt.

Hatte jemand schon so ein Problem?
 

Optimoos

New Member
I was experiencing this problem the other day when I had a really dumb moment and realized that the cause was that my mic was muted by the switch on the cable.... sooo I'll start by asking here whether that might be the case for you as well?
 

Amenince

Member
Not sure if I can help, in "Audio" is your Microphone/Auxiliary Audio Device set to the microphone that you're using? In the taskbar, Right-Click the audio icon and select Recording Devices. Find the microphone you're using and make sure it is set as default and then make sure it is also the Microphone/Auxiliary Audio Device. Also check Force Microphone/Auxiliary to Mono. If everything is turned all the way up and it's still not working after all of that then I don't know what else there is.

Hope I could help and Good luck!
 
Top