Question / Help Laggy response - Multiple settings.

[Donavin]

Hey guys,

I've been off and on streaming for a long time, but finally decided I want to maximize my quality. Currently my issue is mostly the delay (Which I'm assuming I can't do anything about. The Stream is usually 30-40 seconds behind me)

But I'm trying to figure out what to put kbit too; I put it too high, I guess, and the stream never loads. I imagine it has something to do with Twitch limiting normal users. I know if it's too high, people with low downloads can't pick it up.


is my speeds, and I'm not completely sure what KBit to go with.

Currently my processor sits at 100% load sometimes, but high 80s others. I have an i5-3570k (IB). Not the best, but in response to WoW/D3 it should easily be able to stream it.

I can run it on XSplit, so it's obviously a setting issue on my end.

Any help would be appreciated!

Thanks.

 

[dping]

Hey guys,

I've been off and on streaming for a long time, but finally decided I want to maximize my quality. Currently my issue is mostly the delay (Which I'm assuming I can't do anything about. The Stream is usually 30-40 seconds behind me)

But I'm trying to figure out what to put kbit too; I put it too high, I guess, and the stream never loads. I imagine it has something to do with Twitch limiting normal users. I know if it's too high, people with low downloads can't pick it up.


is my speeds, and I'm not completely sure what KBit to go with.

Currently my processor sits at 100% load sometimes, but high 80s others. I have an i5-3570k (IB). Not the best, but in response to WoW/D3 it should easily be able to stream it.

I can run it on XSplit, so it's obviously a setting issue on my end.

Any help would be appreciated!

Thanks.

Need your logfile. Copy the link from the logfile from the help menu and paste the link here.

http://www.teamliquid.net/forum/tech-support/478845-twitchtest-twitch-bandwidth-tester

Use this as a more accurate speedtest to 1. find your best ingest, 2. check your top streaming speed (if above 3500bitrate then use 3500. If less, use 80% of what that lower speed says).