OBS Multiplatform has VCE options was my point ;)
Question / Help its like a rant and suggestion
- Thread starter kittencannon
- Start date
kittencannon
Member
got my hands on a AMD Fury X thanks to guys at local PC repair shop lending it to me to test my theory. but it appears that something broken somewhere. yes it does far better than my R7-370 or iGPU at same settings and tasks however, still hit/miss ratio meaning alot of frame desyncing it seems capturing 30fps then 60fps then 30 then 60 again back and forth creating shutter. i enabled frame rate control at 60, and 30 and turned it off to test all of that, set game sync up to 30 and 60 to test that, matched and mismatched them both and all same.. so no my input causing that.
this was on a clean reinstall of graphics drivers and chipset drivers. my CPU isnt maxing out on most of my tests (apart from GTA 5 being a hopped up meth addict to my CPU, all over usage scale). soo... not sure wat to make of it, i would assumed if my CPU was slow down here, it would at least max out or run much higher workload attempting to compensate. tomorrow they let me back in shop to test it out using a testbench with a skylake i7.. they just closing early today and nice manager gave me fury X to test with promise ill return it within a couple days, since me and him are solid i guess he didnt fear imma run off with it. i guess what you get with you look good...or just fairly attractive female that's into tech..or maybe its my boobs..maybe my cute italian accent? i have ADHD and this sammich i haven't made yet is calling.. brb..maybe.
this was on a clean reinstall of graphics drivers and chipset drivers. my CPU isnt maxing out on most of my tests (apart from GTA 5 being a hopped up meth addict to my CPU, all over usage scale). soo... not sure wat to make of it, i would assumed if my CPU was slow down here, it would at least max out or run much higher workload attempting to compensate. tomorrow they let me back in shop to test it out using a testbench with a skylake i7.. they just closing early today and nice manager gave me fury X to test with promise ill return it within a couple days, since me and him are solid i guess he didnt fear imma run off with it. i guess what you get with you look good...or just fairly attractive female that's into tech..or maybe its my boobs..maybe my cute italian accent? i have ADHD and this sammich i haven't made yet is calling.. brb..maybe.
So what you're writing might make sense to you but until I see a fresh log (restart OBS and stream or record for 5 minutes), I dont know what to tell you because you're not really making a whole lot of sense.
kittencannon
Member
D: :(
should i use my personal build setup ? pretty much same results just shutters much harder...so if anything probably more numbers. ill do it in a bit, making then eating dinner
should i use my personal build setup ? pretty much same results just shutters much harder...so if anything probably more numbers. ill do it in a bit, making then eating dinner
kittencannon
Member
also how do i attach a log file or do i just copy and paste it?
kittencannon
Member
well here i did it this way because i like being difficult, should i test with my slower GPU? ..oh also that vce is probably too slow happens often with window capture..makes sense since not good at real time. and this is with my iGPU being fed 2GB of main system memory(reserved in bios) :
Code:
17:26:43: Open Broadcaster Software v0.657b - 64bit ( ^ω^)
17:26:43: -------------------------------
17:26:43: CPU Name: AMD A10-7750K Radeon R7, 12 Compute Cores 4C+8G
17:26:43: CPU Speed: 4434MHz
17:26:43: Physical Memory: 14279MB Total, 10205MB Free
17:26:43: stepping id: 1, model 48, family 21, type 0, extmodel 1, extfamily 3, HTT 1, logical cores 4, total cores 2
17:26:43: monitor 1: pos={0, 0}, size={1920, 1080}
17:26:43: Windows Version: 10.0 Build 10586 (revision 0)
17:26:43: Aero is Enabled
17:26:43: -------------------------------
17:26:43: OBS Modules:
17:26:43: Base Address Module
17:26:43: 0000000064520000 OBS.exe
17:26:43: 00000000026A0000 OBSApi.dll
17:26:43: 0000000008A10000 DShowPlugin.dll
17:26:43: 0000000010DD0000 GraphicsCapture.dll
17:26:43: 0000000011660000 NoiseGate.dll
17:26:43: 0000000010E60000 PSVPlugin.dll
17:26:43: 0000000009400000 scenesw.dll
17:26:43: ------------------------------------------
17:26:43: Adapter 1
17:26:43: Video Adapter: AMD Radeon (TM) R9 Fury X Series Graphics
17:26:43: Video Adapter Dedicated Video Memory: 4276273152
17:26:43: Video Adapter Shared System Memory: 3191590912
17:26:43: Video Adapter Output 1: pos={0, 0}, size={1920, 1080}, attached=true
17:26:43: ------------------------------------------
17:26:43: Adapter 2
17:26:43: Video Adapter: AMD Radeon(TM) R7 Graphics
17:26:43: Video Adapter Dedicated Video Memory: 2115305472
17:26:43: Video Adapter Shared System Memory: 3191590912
17:26:43: =====Stream Start: 2016-01-14, 17:26:43===============================================
17:26:43: Multithreaded optimizations: On
17:26:43: Base resolution: 1920x1080
17:26:43: Output resolution: 1920x1080
17:26:43: ------------------------------------------
17:26:43: Loading up D3D10 on AMD Radeon (TM) R9 Fury X Series Graphics (Adapter 1)...
17:26:43: ------------------------------------------
17:26:43: Audio Format: 48000 Hz
17:26:43: ------------------------------------------
17:26:43: Audio Channels: 2 Ch
17:26:43: Playback device Default
17:26:43: ------------------------------------------
17:26:43: Using desktop audio input: 1 - SAMSUNG (AMD High Definition Audio Device)
17:26:43: Global Audio time adjust: 0
17:26:43: ------------------------------------------
17:26:43: Audio Encoding: AAC
17:26:43: bitrate: 128
17:26:43: Using Window Capture
17:26:43: Scene buffering time set to 700
17:26:44: Successfully loaded ObsVCEAMF.dll
17:26:44: ObsVCEAMF.dll initialized successfully
17:26:44: VCE encoding with AMF.
17:26:44: Successfully loaded ObsVCEAMF.dll
17:26:44: ObsVCEAMF.dll initialized successfully
17:26:44: Possible support for AMD VCE.
17:26:44: Build date Dec 12 2015 12:00:57
17:26:44: DX11: List of adapters:
17:26:44: Index 0: Device ID: 6811 [AMD Radeon (TM) R9 Fury X Series Graphics]
17:26:44: Index 1: Device ID: 1313 [AMD Radeon(TM) R7 Graphics]
17:26:44: Skipping non-AMD vendor: 1414
17:26:44: No adapter nr 3. End enumeration.
17:26:44: AMF DX11 : Using device 0: Device ID: 6811 [AMD Radeon (TM) R9 Fury X Series Graphics]
17:26:44: InitDX11() created HW DX11.1 device
17:26:44: Capabilities:
17:26:44: Accel type: HARDWARE
17:26:44: Max bitrate: 100000000
17:26:44: Levels: 10 11 12 13 20 21 22 30 31 32 40 41 42 50 51
17:26:44: Profiles: 66 77 100
17:26:44: Input mem types:
17:26:44: HOST, native: No
17:26:44: OPENGL, native: No
17:26:44: OPENCL, native: No
17:26:44: DX11, native: Yes
17:26:44: Width min/max: 64/1920
17:26:44: Height min/max: 64/1920
17:26:45: Rate control method:
17:26:45: Constrained QP (0)
17:26:45: Failed to set 'VBVBufferSize' property.
17:26:45: Failed to set 'BPicturesDeltaQP' property.
17:26:45: Failed to set 'ReferenceBPicturesDeltaQP' property.
17:26:45: Failed to set 'MinQP' property.
17:26:45: Failed to set 'MaxQP' property.
17:26:45: FrameRate = <rate>60/1
17:26:45: GOPSize = 60
17:26:45: IDRPeriod = 120
17:26:45: PeakBitrate = 1000000
17:26:45: TargetBitrate = 1000000
17:26:45: VBVBufferSize = 20000000
17:26:45: QualityPreset = 2
17:26:45: Profile = 77
17:26:45: ProfileLevel = 42
17:26:45: MinQP = 51
17:26:45: MaxQP = 51
17:26:45: BPicturesPattern = 0
17:26:45: CABACEnable = <bool>1
17:26:46: Failed to submit input buffer multiple times already. VCE is probably too slow for current settings.
Error: Failed to map D3D11 texture: Out of memory.
17:26:47: Failed to submit input buffer multiple times already. VCE is probably too slow for current settings.
17:26:47: Failed to submit input buffer multiple times already. VCE is probably too slow for current settings.
17:26:48: Failed to submit input buffer multiple times already. VCE is probably too slow for current settings.kittencannon
Member
also just noticed....stepping ID 1? i run overdrive at step 2 turbo mode (4.2-4.45 GHz) . *huh*
kittencannon
Member
my log file lasts less than 1 minute before i gave up :D partially because i cant log more then i did, it failed
kittencannon
Member
my log work?
does it not work?
lets figure this puzzle out :D
does it not work?
lets figure this puzzle out :D
please slow yourself. 1080@60 has some sort of artificial limitation in software. try changing the VCE preset to balanced or even speed then constrained QP. both those options are under the VCE encoder settings.
kittencannon
Member
sorry, im excitable:
i tested 1080P 30FPS with literally same results. and its set to constrained QP as its least blocky video.
and balanced gives me same as quality settings just shutter in output, and speed works..but very blocky.. maybe suggestions to ticker with or change under speed or balanced?
i tested 1080P 30FPS with literally same results. and its set to constrained QP as its least blocky video.
and balanced gives me same as quality settings just shutter in output, and speed works..but very blocky.. maybe suggestions to ticker with or change under speed or balanced?
kittencannon
Member
mehh.. so..been meaning to also ask...
VCE 2.0 / 1.2 watever u wish to call it now supports I/P/B frames and is little faster... can this be better explained and example with VCE OBS?
im buying (stupid i know but decided go with it) another A10 APU. this time a A10-7890K just arrived local store in limited quantity they only got 25 in stock and ordered 100 like they do for every cpu at once. but my friend giving me his 30% discount..so yay...still alot tho..
it also has a new wraith cooler included...getting it in a couple days, because they still building out there...stuff...so..anyway..
but back to VCE settings. couple questions.....
1. explains what I/P/B frames are and how it best utilized to capture via APU / GPU. maybe whats good whats bad..?
2. am i stuck on game capture via dedicated GPU and window capture being my only option for APU to capture?.
2a. or is there a clever trick to force my APU to capture game and dedicated GPU to just play it.
also..im so effing lucky..i been having these bad days recently with my health, so something really made my day other day, i goT for free a pair of 250GB samsung evo SSDs. noticed someone tossing a computer out and left it next to garbage in snow and sleet... so did a quick look inside..score!.. let them dry in my bathroom on radiator for a bit..they totally work.. after let them dry a night or two.. wooo. also somehow with being sick and not knowing best english, i scored a date, but i blame my pet fox, was walking her the other day in park near my place. and she always interested in playing with new people.. ..or just yipping at them but usually playing like trying to crawl on them or walking back and forth like a moron... so ya.. she was jumping on em....another score=^ . ^=
VCE 2.0 / 1.2 watever u wish to call it now supports I/P/B frames and is little faster... can this be better explained and example with VCE OBS?
im buying (stupid i know but decided go with it) another A10 APU. this time a A10-7890K just arrived local store in limited quantity they only got 25 in stock and ordered 100 like they do for every cpu at once. but my friend giving me his 30% discount..so yay...still alot tho..
it also has a new wraith cooler included...getting it in a couple days, because they still building out there...stuff...so..anyway..
but back to VCE settings. couple questions.....
1. explains what I/P/B frames are and how it best utilized to capture via APU / GPU. maybe whats good whats bad..?
2. am i stuck on game capture via dedicated GPU and window capture being my only option for APU to capture?.
2a. or is there a clever trick to force my APU to capture game and dedicated GPU to just play it.
also..im so effing lucky..i been having these bad days recently with my health, so something really made my day other day, i goT for free a pair of 250GB samsung evo SSDs. noticed someone tossing a computer out and left it next to garbage in snow and sleet... so did a quick look inside..score!.. let them dry in my bathroom on radiator for a bit..they totally work.. after let them dry a night or two.. wooo. also somehow with being sick and not knowing best english, i scored a date, but i blame my pet fox, was walking her the other day in park near my place. and she always interested in playing with new people.. ..or just yipping at them but usually playing like trying to crawl on them or walking back and forth like a moron... so ya.. she was jumping on em....another score=^ . ^=