Bug Report Hauppauge Rocket Not Working

[Mrgreen55]

Hauppauge Rocket is not working, The Hauppauge capture just crash every time if i have it open before opening obs with it active in obs but if i open obs first then open Hauppauge capture it give me this message"Your HD Rocket Did not start. Please close hauppauge Capture. unplug the power to your HD PVR rocket, replug the power, then restart Hauppauge Capture. (unable to locate crossbar fiter(#1)))" But if i do that it still don't work has anyone found away around this? I'm using Obs windows build 7.3 and the Hauppauge capture is 1.0.33030.


Update i had to restart my PC to fix the crossbar thing so the capture is working fine now. But obs still give me a black screen.

 

[Isegrim]

Did you pick the proper resolution?

 

[Mrgreen55]

Did you pick the proper resolution?

what do you mean by this?? i have it set the same as the other obs.

 

[Isegrim]

You might have to pick the appropriate resolution in the capture card settings. It should match with the source resolution.

 

[Mrgreen55]

You might have to pick the appropriate resolution in the capture card settings. It should match with the source resolution.

I can not go in to the configure video on the capture card but i can go in to the configure crossbar. Every thing then the crossbar look right to me but im not sure what the crossbar thing does so it my be wrong. The crossbar setting right now are at 0:video ParallelDigital IN For the input and for the output it set at 0:video Decoder Out, Im using Hdmi which is connect to ps4.

 

[Isegrim]

you should be able to select your rocket in sources. right click and select properties.

 

[Mrgreen55]

you should be able to select your rocket in sources. right click and select properties.

huh i had to go the properties for the crossbar stuff so what are you talking about.... im lost

 

[Isegrim]

i'm talking about the video setting not the crossbar.

 

[Lain]

I can't guarantee that the rocket will work. The reason why is due to its design.. It's a really frustrating device and I just barely managed to make it work as it is, and can't even guarantee it'll work under every circumstance. It's actually really depressing.

 

[Mrgreen55]

I can't guarantee that the rocket will work. The reason why is due to its design.. It's a really frustrating device and I just barely managed to make it work as it is, and can't even guarantee it'll work under every circumstance. It's actually really depressing.

It's fine Jim just letting you now that was all don't feel bad the dam people at Hauppauge don't even know how to make the rocket work to they brake the rocket with every update with there software. It was so bad i had to call them to send me in older version of Hauppauge capture software to get the rocket working so if the guy that made the rocket it cant make it work all the time don't beat yourself up over this jim :)

 

[B.E GAMERS (youtuber )]

I ran in with the same issue but with my Avermedia extreme cap u3. This worked with my ps4. I tok the hdmi coe=rd connected to the ps4 out of the capture card and then turned my ps4 on. After that i plugged the hdmi cord back in and clicked on obs and it picked up the signal. I dont know if this will work for you but if it does let us know

 

[Mrgreen55]

I ran in with the same issue but with my Avermedia extreme cap u3. This worked with my ps4. I tok the hdmi coe=rd connected to the ps4 out of the capture card and then turned my ps4 on. After that i plugged the hdmi cord back in and clicked on obs and it picked up the signal. I dont know if this will work for you but if it does let us know

Ok i would like to try that but i'm a little lost my setup a little different my ps4 connect to my monitor. Then my rocket connect to that same monitor throw HDMI Out. So which HDMI Do you want to me to unplug then re plug??

The monitor is BenQ RL2460HT.

 

[B.E GAMERS (youtuber )]

the one that is connected to the ps4 and if that does not work try taking all the hdmi cords out

 

[Mrgreen55]

the one that is connected to the ps4 and if that does not work try taking all the hdmi cords out

ok tried both way a still nothing it still shows a black screen on obs.

 

[B.E GAMERS (youtuber )]

Wow...I thinks the rocket is just not that compatible...this is hauppage problem and knowing them they are most likely not gonna change anything

 

[Mrgreen55]

Wow...I thinks the rocket is just not that compatible...this is hauppage problem and knowing them they are most likely not gonna change anything

ok that sucks but i think it has somthing to do with this ( DShow: HDevice::ConnectFilters: RenderStream failed (0x80070057): The parameter is incorrect. )

 

[GillyMoMo]

I can't guarantee that the rocket will work. The reason why is due to its design.. It's a really frustrating device and I just barely managed to make it work as it is, and can't even guarantee it'll work under every circumstance. It's actually really depressing.

I have it working with no issues so far. That and the HDPVR2.

 

[Mrgreen55]

I have it working with no issues so far. That and the HDPVR2.

How did you get the rocket working????

 

[GillyMoMo]

I installed the drivers as needed. It doesn't show up in OBS as a Happauge though rather the I9110 or some something to that fashion.

 

[Mrgreen55]

I installed the drivers as needed. It doesn't show up in OBS as a Happauge though rather the I9110 or some something to that fashion.

I know that but i get a black screen in obs how did you not get a black screen? Which obs are you using??? 8.3 or 7.3?