Starting Output Failed

C

critical-z

New Member
I'm running OBS as admin and GPU drivers are up to date. Tried everything I can think of, but only software encoders will work.
I'm at a loss. I've never had this issue before.
 

Attachments

Log is truncated so I can't see your encoding settings but I'm going to guess that you may be trying to encode with the iGPU instead of the RX590. According to the specs, it appears that the iGPU may not have encoding capabilities.

12:36:01.425: Settings changed (outputs)
12:36:01.425: ------------------------------------------------
12:36:03.167: [texture-amf-h264] amf_avc_create_texencode: Wrong adapter
12:36:03.183: [fallback-amf-h264: 'advanced_video_recording'] amf_create_encoder: CreateComponent failed: AMF_NOT_FOUND
12:36:03.196: [fallback-amf-h264] amf_avc_create_fallback: Failed to create encoder
12:36:16.123: Settings changed (outputs)
12:36:16.123: ------------------------------------------------
12:36:24.375: ==== Shutting down ==================================================


obs not working: starting the output failed please check your drivers are up to date

Hi! I have tried everything I have seen to make OBS work but it keeps saying the same thing in the title. I have updated my drivers, uninstalled then reinstalled, checked for windows updates, checked compatibility, checked my settings, checked if my hard drive needed optimization, gone into my...
obsproject.com
 
Last edited:
rockbottom said:
Log is truncated so I can't see your encoding settings but I'm going to guess that you may be trying to encode with the iGPU instead of the RX590. According to the specs, it appears that the iGPU may not have encoding capabilities.

12:36:01.425: Settings changed (outputs)
12:36:01.425: ------------------------------------------------
12:36:03.167: [texture-amf-h264] amf_avc_create_texencode: Wrong adapter
12:36:03.183: [fallback-amf-h264: 'advanced_video_recording'] amf_create_encoder: CreateComponent failed: AMF_NOT_FOUND
12:36:03.196: [fallback-amf-h264] amf_avc_create_fallback: Failed to create encoder
12:36:16.123: Settings changed (outputs)
12:36:16.123: ------------------------------------------------
12:36:24.375: ==== Shutting down ==================================================


obs not working: starting the output failed please check your drivers are up to date

Hi! I have tried everything I have seen to make OBS work but it keeps saying the same thing in the title. I have updated my drivers, uninstalled then reinstalled, checked for windows updates, checked compatibility, checked my settings, checked if my hard drive needed optimization, gone into my...
obsproject.com
Click to expand...
I attached a screenshot of my settings. I don't see an option for GPU/iGPU anywhere in OBS.
1756148172463.png
 
I don't either but I'm not using the version of OBS that you are. Set your Keyframe Interval to 2 & B Frames to 0. AMD drivers suck & were causing issues when encoding with B Frames. Not sure if the installed driver versions are affected.
 
rockbottom said:
I don't either but I'm not using the version of OBS that you are. Set your Keyframe Interval to 2 & B Frames to 0. AMD drivers suck & were causing issues when encoding with B Frames. Not sure if the installed driver versions are affected.
Click to expand...
No change with your recommendation.
 
Something else you may want to try.

Start from scratch with a clean slate. Create a new Scene Collection, add (1) Scene/Source. Test.
 
rockbottom said:
Stinks

Did it start after an update?

Post the log from the session, the old log is worthless for troubleshooting.
Click to expand...
That was the most recent log.
I recently upgraded my PC, minus the GPU for now. Reinstalled Windows and all, and I guess it probably started since then. Before that I was using a now apparently deprecated version of the AMD encoder, which still seemed to work, although it did sometimes give me the same error. Said error prompted me to try the newer one, but now it won't work at all.

I reckon my last resort is a clean driver install.

rockbottom said:
Something else you may want to try.

Start from scratch with a clean slate. Create a new Scene Collection, add (1) Scene/Source. Test.
Click to expand...
Yeah, I have tried this actually, as well as completely reinstall OBS. No change.
 
You must log in or register to reply here.
Back
Top