Bug Report Sources with Multiple Filters Aren't Visible (OBS MP 0.12.1)

[nutella4eva]

I updated to OBS MP 0.12.1 today and noticed a lot of my sources were invisible on startup. I discovered that the cause was using multiple filters. If a source has more than one filter *enabled*, then it will not be visible on startup until you enable and disable at least one source. e.g. Using a crop filter and color key filter simultaneously will result in the source being invisible. From here on, the source is visible as per normal, with all filters enabled, but the source will be invisible on the next startup so long as more than one filter is enabled in the config files.

Anyone noticing this problem? I have tested this on my own config files as well as a new install of OBS MP 0.12.1. I can provide a log if necessary, but you should be able to reproduce the bug (unless I am doing something horribly wrong).

 

[puri_puri]

I've got the same problem: sources with multiple enabled effect filters cause the source to appear blank until only one filter is on.

OBS MP 0.12.1 on Windows 10.

 

[Osiris]

Seems like a bug in 0.12.1, since it only happens there.

 

[DreadfullyDespized]

If you disable all filters and then systematically enable one at a time and reconfigure them. Your filtered object will be fine. For me it was an issue that happened initially after the 0.12.0 to 0.12.1 update. Once I went through all of my objects and disabled the filters. Then enabled them one at a time and reconfigured them. Everything worked great. I have up to 6 filters on some scene objects.

 

[CalebGamer14]

Ok thx guys I had the same problem and didn't have a clue what wax going on so I couldn't stream anything today I hope we get a patch to fix this soon.

 

[Deadsens3]

For some reason my Avermedia camera is not being recognized now. Ive tried removing filters and still nothing> any ideas?

 

[Lain]

Bug has been filed. I'll find the problem, fix it, and release it as 0.12.2.

 

[nutella4eva]

If you disable all filters and then systematically enable one at a time and reconfigure them. Your filtered object will be fine. For me it was an issue that happened initially after the 0.12.0 to 0.12.1 update. Once I went through all of my objects and disabled the filters. Then enabled them one at a time and reconfigured them. Everything worked great. I have up to 6 filters on some scene objects.

That only works until you relaunch OBS, then the source is missing again, at least, this is the case for me. Not sure what you mean by reconfigure, I completely made new sources to test this and it still does not work.

 

[DreadfullyDespized]

That only works until you relaunch OBS, then the source is missing again, at least, this is the case for me. Not sure what you mean by reconfigure, I completely made new sources to test this and it still does not work.

I just found this out today. Sorry for the quick jump to a solution. That is indeed annoying. By reconfigure. I was meaning that I would disable all of the filters on the source. Then enable them one by one and it would look fine. Though the moment I re-launched OBS Multi. The issue came back and I had to repeat my previous steps. Still quite an issue.

 

[Lain]

Fixed in 0.12.2