AviateZone
New Member
Everything is working fine except for the audio. Everytime I alt tab out of counter strike, the audio is gone.
Specs and how the stream is setup below:
My Gaming PC:
* i7 4790k
* MSI GTX 970 4G
* MSI Z97s SLI KRAIT Edition
* HyperX Fury 16GB 1866MHz DDR3
* Windows 10 Pro 64 Bit
Streaming PC:
* i5 760
* ASUS GTX 760
* ASRock P55 USB3 Pro
* Corsair 8GB 1333MHz DDR3
* Windows 8.1 64 Bit
Audio/Video is looping like this:
* Gaming PC outputs Dual Link DVI -> Monitor
* Gaming PC outputs HDMI to the capture card (Elgato HD60)
* My monitor and elgato are duplicated.
* I am using Voicemeeter to send audio to my headset and to the Elgato HD60.
* Audio is transferred via HDMI to the Elgato HD60
So the audio and video are both going through the capture card's HDMI. In OBS, I have the audio being played via the capture card source, as there is an option to have audio through this source played.
I have made sure all the audio bitrates match up as well (all are running 16bit 48000hz)
So how i make the audio work again, is that i have to reselect the Elgato-C into the A2 Out.
But everytime I alt tab, i have to do the same thing over and over again and it is really annoying.
Here is my log file: https://gist.github.com/anonymous/0286ddde0a24e02955b0be536ae5670f
Hopefully someone knows an solution to this annoying problem!
Specs and how the stream is setup below:
My Gaming PC:
* i7 4790k
* MSI GTX 970 4G
* MSI Z97s SLI KRAIT Edition
* HyperX Fury 16GB 1866MHz DDR3
* Windows 10 Pro 64 Bit
Streaming PC:
* i5 760
* ASUS GTX 760
* ASRock P55 USB3 Pro
* Corsair 8GB 1333MHz DDR3
* Windows 8.1 64 Bit
Audio/Video is looping like this:
* Gaming PC outputs Dual Link DVI -> Monitor
* Gaming PC outputs HDMI to the capture card (Elgato HD60)
* My monitor and elgato are duplicated.
* I am using Voicemeeter to send audio to my headset and to the Elgato HD60.
* Audio is transferred via HDMI to the Elgato HD60
So the audio and video are both going through the capture card's HDMI. In OBS, I have the audio being played via the capture card source, as there is an option to have audio through this source played.
I have made sure all the audio bitrates match up as well (all are running 16bit 48000hz)
So how i make the audio work again, is that i have to reselect the Elgato-C into the A2 Out.
But everytime I alt tab, i have to do the same thing over and over again and it is really annoying.
Here is my log file: https://gist.github.com/anonymous/0286ddde0a24e02955b0be536ae5670f
Hopefully someone knows an solution to this annoying problem!