SOLVED: Reliable Cubase/DAW → OBS Audio Capture Without ASIO Plugins

W

WolfWare

New Member
This method bypasses OBS ASIO capture entirely by feeding a DAW Aux Send into a dedicated USB audio device, allowing OBS to record live screen and live DAW audio without ASIO plugins, virtual cables or ReaRoute.

Requirements:
1x local unused/free Audio device.
1x USB Audio Device that supports Stereo playback, Mono microphone and 24bit/48000 playback.
1x Mono 3.3 jack to 1x Mono 1/4" jack cable (length 1x metre minimum).

Setup:
Configue a Stereo Master Out on your DAW mixer and assign 1x full stereo or 2x mono channels (say 7/8).
Plug your Mono 3.5 jack into your USB Audio Devices Line/Microphone In connector.
Plug your Mono 1/4" jack into your DAW mixer Aux1 send.
Set the Aux1 and master send output levels for 7/8 to mid point.

OBS:
Add 1x Audio Input Capture and assign your USB device.
Add 1x Audio Output Capture and assign your local unused/free Audio device.

You shoud now have level indication on your OBS Audio Input Capture source.

d:o)
 
WolfWare said:
This method bypasses OBS ASIO capture entirely by feeding a DAW Aux Send into a dedicated USB audio device, allowing OBS to record live screen and live DAW audio without ASIO plugins, virtual cables or ReaRoute.

Requirements:
1x local unused/free Audio device.
1x USB Audio Device that supports Stereo playback, Mono microphone and 24bit/48000 playback.
1x Mono 3.3 jack to 1x Mono 1/4" jack cable (length 1x metre minimum).

Setup:
Configue a Stereo Master Out on your DAW mixer and assign 1x full stereo or 2x mono channels (say 7/8).
Plug your Mono 3.5 jack into your USB Audio Devices Line/Microphone In connector.
Plug your Mono 1/4" jack into your DAW mixer Aux1 send.
Set the Aux1 and master send output levels for 7/8 to mid point.

OBS:
Add 1x Audio Input Capture and assign your USB device.
Add 1x Audio Output Capture and assign your local unused/free Audio device.

You shoud now have level indication on your OBS Audio Input Capture source.

d:o)
Click to expand...
Revised: This method bypasses OBS ASIO capture entirely by feeding a DAW Aux Send into a dedicated USB audio device, allowing OBS to record live screen and live DAW audio without ASIO plugins, virtual cables or ReaRoute.

Requirements:
1x local ASIO free Audio device (onboard sound board/card).
1x USB Audio Device that supports Mono microphone and 24bit/48000 Stereo playback (i.e. Cubilux USB Sound Card Adapter with 96 KHz/24-bit DAC, USB Audio & Microphone Dongle with 3.5mm Jack).

1x Mono 3.3 jack to 1x Mono 1/4" jack cable (length 1x metre minimum).

Setup:
Configure a Stereo Master Out on your DAW mixer (assign 1x full stereo or 2x mono channels) say 7+8.
Plug your Mono 3.5 jack into your USB Audio Devices Line/Microphone In connector.
Plug your Mono 1/4" jack into your DAW mixer Aux1 send.
Set the 7+8 Aux1 and Master Aux1 output levels to mid point.

OBS:
Add 1x Audio Input Capture and assign your USB device to it.
Add 1x Audio Output Capture and assign your local free Audio device to it.

You shoud now have level indication on your OBS Audio Input Capture source.

d:o)
 
You must log in or register to reply here.
Back
Top