Question / Help Setting up stream with 2 PC's

DrivethruJ

New Member
So I got my new gaming rig and can stream from it fine but my old pc is capable of streaming as well. I want to use it to encode to relieve stress on my new pc. I can get it to capture via my aVermedia capture card and every thing is fine except for I can't seem to get audio. I have attached a cable from my audio out on my onboard audio on my new pc to audio in on my old onboard pc audio. I use a Logitech G wireless headset for my audio so I don't know how to get my streaming pc to capture that. If I can get the audio down i'll be good to go.

Gaming PC Specs : i7 3770k OC'd to 4.5 Ghz, 16 Gig of ram, nVidia GTX Titan graphics card, 128gb SSD, 2TB Hard drive.
Streaming PC Spec i7 870k OC'd to 4.0 Ghz, 16 Gig of ram, nVidia gtx 670 graphics card, 256gb SSD, 1 TB Hard drive.
 

WayZHC

Member
Try to output Stereo Mix from the gaming pc to the streaming pc. Should work since Stereo Mix captures all the audio sources including those Logitech Headset sounds.
 

DrivethruJ

New Member
WayZHC said:
Try to output Stereo Mix from the gaming pc to the streaming pc. Should work since Stereo Mix captures all the audio sources including those Logitech Headset sounds.

Where do I find that option to do that?
 

dodgepong

Administrator
Community Helper
Open your Recording devices and find your Stereo Mix (you might have to right-click > Show Disabled Devices and enable it). The go to your Stereo Mix properties and go to the Listen tab. Check the box to listen to this device, and select the speakers that the line out cable is connected to.
 

DrivethruJ

New Member
dodgepong said:
Open your Recording devices and find your Stereo Mix (you might have to right-click > Show Disabled Devices and enable it). The go to your Stereo Mix properties and go to the Listen tab. Check the box to listen to this device, and select the speakers that the line out cable is connected to.

It won't cause a delay in audio in the stream or anything will it?
 
Top