Rx 5600 XT settings tips

[Dilas]

Hey guys!
I'm really struggling to find the perfect settings to encode on this GPU. I actually think i found the edge of it, because if i change only one of these settings on my log, the OBS sends me the message of "enconding overwhelmed", but i have seen some videos that the quality is far better than mine and using the same GPU to encode.. If someone uses the RX 5600 XT and are managing a constant 1080p 60FPS recording, can please share the settings on OBS ?
Ty in advance!

 

[rockbottom]

Using CBR with H265 is kind of killing the point of using H265 but AMF is what it is....

Even when you're using CBR, you can still set a CQ Range. You're at Default, Minimum 18 - Maximum 51. Change the Maximum to 18 & see if you notice a difference/start dropping frames. If all looks good, try the Quality Preset & enable Pre-pass Mode

 

[rockbottom]

FYI, I'm still using driver 20.9.1 on my PC that has an AMD GPU (Fury X) & I'm not getting these errors. Not sure what's going on here.

15:25:38.385: [AMF] <Id: 1> Unable to set converter transfer characteristic, error AMF_NOT_FOUND (code 11)
15:25:38.426: [AMF] <Id: 2> Unable to set converter transfer characteristic, error AMF_NOT_FOUND (code 11)

15:25:42.291: [AMF] <Id: 3> Unable to set converter transfer characteristic, error AMF_NOT_FOUND (code 11)
15:25:42.297: [AMF] Exception occurred while updating capabilities: Invalid Parameter
15:25:42.332: [AMF] <Id: 4> Unable to set converter transfer characteristic, error AMF_NOT_FOUND (code 11)
15:25:42.339: [AMF] Exception occurred while updating capabilities: Invalid Parameter
15:25:42.402: [AMF] <Id: 5> Unable to set converter transfer characteristic, error AMF_NOT_FOUND (code 11)
15:25:42.445: [AMF] <Id: 6> Unable to set converter transfer characteristic, error AMF_NOT_FOUND (code 11)

15:30:59.130: [AMF] <Id: 8> Unable to set converter transfer characteristic, error AMF_NOT_FOUND (code 11)
15:30:59.138: [AMF] Exception occurred while updating capabilities: Invalid Parameter
15:30:59.181: [AMF] <Id: 9> Unable to set converter transfer characteristic, error AMF_NOT_FOUND (code 11)
15:30:59.190: [AMF] Exception occurred while updating capabilities: Invalid Parameter
15:30:59.253: [AMF] <Id: 10> Unable to set converter transfer characteristic, error AMF_NOT_FOUND (code 11)
15:30:59.301: [AMF] <Id: 11> Unable to set converter transfer characteristic, error AMF_NOT_FOUND (code 11)

 

[rockbottom]

15:25:37.700: ================================
15:25:37.700: Warning: OBS is already running!
15:25:37.700: ================================
15:25:37.700: User is now running multiple instances of OBS!

Turn On Game Mode
15:25:37.705: Windows 10 Gaming Features:
15:25:37.705: Game Bar: Off
15:25:37.705: Game DVR: Off
15:25:37.705: Game DVR Background Recording: Off
15:25:37.705: Game Mode: Off

Create another Scene & move one of these to it
15:25:39.496: - scene 'Teste config':
15:25:39.496: - source: 'Captura de jogo' (game_capture)
15:25:39.496: - source: 'Captura de tela' (monitor_capture)

If you start seeing Rendering Lag, run OBS as ADMIN.

No need to do it right away but you should update Windows soon.

While you're at it, upgrade your audio.

OBS-Studio: Enable CoreAudio AAC encoder (Windows)

First of all, if you have iTunes or QuickTime installed, chances are you are already using the CoreAudio AAC encoder in OBS-Studio. But if you normally do not use or install any of those, there is another way to enable it. All we need is the...

obsproject.com

 

[Dilas]

Sorry, i just did the adjust that you mention on the first comment, and it kind of solved my problem.. But i will do everything you said..
Thank you so much, it never ran so smoothly.. You are a genius man!!

 

[rockbottom]

Cool, YW!

Keep testing & trying different settings too (especially CQP), you won't hurt anything & you may find a combination that suits your needs better.