Question / Help poor quality at 75000 bitrate

[Skylakr]

hello,i tried multiple setting to make my video quality better but its the same everytime.
i put 75000 bitrate,use cbr,preset x264 cpu super fast.
what i need to do to see better?
i have an fx 6300,750ti,1440x900 display
can you make me some settings?

 

[alpinlol]

Please post a Log.

General guidance https://obsproject.com/forum/resources/how-to-make-high-quality-local-recordings.16/

 

[Skylakr]

Please post a Log.

General guidance https://obsproject.com/forum/resources/how-to-make-high-quality-local-recordings.16/

i tried the settings but isn t changed nothing. can be from windows 10 or my display?

 

[Harold]

Post a clean log from where you attempted those settings.

 

[Skylakr]

Post a clean log from where you attempted those settings.[/QUOTE where i can find that log or how i do it
i think obs its recording 75hz because when i am putting my display on 75hz i see like the recording

 

[Skylakr]

this is the last log

 

[Sapiens]

That log file doesn't contain any recording attempts, or much of anything for that matter. To make a clean log file, first restart OBS, then start your stream/recording for ~30 seconds and stop it again. When you're done select Help > Log Files > Upload Current Log File. Copy the URL and paste it here.

 

[Skylakr]

That log file doesn't contain any recording attempts, or much of anything for that matter. To make a clean log file, first restart OBS, then start your stream/recording for ~30 seconds and stop it again. When you're done select Help > Log Files > Upload Current Log File. Copy the URL and paste it here.

ok this is the log maked how you sayd https://gist.github.com/abdd21ef740f35fa999de7cab22aa39d

 

[Sapiens]

The log clearly shows you didn't use any of the settings described in your original post or the local recording guide. Have another look and follow the instructions - https://obsproject.com/forum/resources/how-to-make-high-quality-local-recordings.16/

 

[Skylakr]

The log clearly shows you didn't use any of the settings described in your original post or the local recording guide. Have another look and follow the instructions - https://obsproject.com/forum/resources/how-to-make-high-quality-local-recordings.16/

here is another log with the settings you give me in the post: https://gist.github.com/ab3907914a3e2224f77c4154054f62d5

 

[alpinlol]

11:27:55: Using custom x264 settings: "crf=X"
11:27:55: The custom x264 command 'crf=X' failed

Quote from the Guide
"
Custom x264 parameters: crf=X
Where X is anywhere from 1-20, lower being higher quality / higher CPU usage. A good place to start is the 15 - 20 range. A CRF of 0 enables lossless recording which will have very high file size and CPU requirements and introduces compatibility issues, so be careful!"

I usually use crf=18

Other than that its your decision now how did the recording come out? any Quality imporvement?

 

[Skylakr]

11:27:55: Using custom x264 settings: "crf=X"
11:27:55: The custom x264 command 'crf=X' failed

Quote from the Guide
"
Custom x264 parameters: crf=X
Where X is anywhere from 1-20, lower being higher quality / higher CPU usage. A good place to start is the 15 - 20 range. A CRF of 0 enables lossless recording which will have very high file size and CPU requirements and introduces compatibility issues, so be careful!"

I usually use crf=18

Other than that its your decision now how did the recording come out? any Quality imporvement?

there was a litle bit but on youtube same, poor quality

 

[Harold]

Failing to follow the guide properly will always give you bad quality.

Do a new log showing you ACTUALLY following the guide.

Also, using youtube for quality checks is BAD PRACTICE.

 

[Skylakr]

Failing to follow the guide properly will always give you bad quality.

Do a new log showing you ACTUALLY following the guide.

Also, using youtube for quality checks is BAD PRACTICE.

yes but i want to upload videos on youtube. so you want a log making the settings and recording? i maked the settings SAME as the guide

 

[Harold]

Post your log from the session where you actually did that like I asked you to already.