PC shuts down with USB capture device

K

keanu_yves

New Member
Using OBS with the notebook's internal webcam, everything works fine. But when I connect a USB capture device, after a few minutes, the PC shuts down.

The integrated webcam is old and with low resolution, I want to be able to use my camcorder.

Log:

16:52:06.597: CoInitializeEx succeeded: 0x00000001
16:52:06.598: CPU Name: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz
16:52:06.598: CPU Speed: 2527MHz
16:52:06.598: Physical Cores: 2, Logical Cores: 4
16:52:06.598: Physical Memory: 7990MB Total, 5493MB Free
16:52:06.598: Windows Version: 10.0 Build 19041 (release: 2004; revision: 450; 64-bit)
16:52:06.598: Running as administrator: true
16:52:06.598: Aero is Enabled (Aero is always on for windows 8 and above)
16:52:06.598: Windows 10 Gaming Features:
16:52:06.598: Game DVR: On
16:52:06.601: Sec. Software Status:
16:52:06.603: Microsoft Defender Antivírus: disabled (AV)
16:52:06.604: Avast Antivirus: enabled (AV)
16:52:06.604: Firewall do Windows: enabled (FW)
16:52:06.605: Current Date/Time: 2020-09-17, 16:52:06
16:52:06.605: Browser Hardware Acceleration: true
16:52:06.605: Portable mode: false
16:52:07.258: OBS 25.0.8 (64-bit, windows)
16:52:07.258: ---------------------------------
16:52:07.260: ---------------------------------
16:52:07.260: audio settings reset:
16:52:07.260: samples per sec: 44100
16:52:07.260: speakers: 2
16:52:07.277: ---------------------------------
16:52:07.277: Initializing D3D11...
16:52:07.277: Available Video Adapters:
16:52:07.281: Adapter 0: Intel(R) HD Graphics
16:52:07.281: Dedicated VRAM: 67108864
16:52:07.281: Shared VRAM: 1711276032
16:52:07.281: PCI ID: 8086:46
16:52:07.282: Driver Version: 8.15.10.2900
16:52:07.282: output 0: pos={0, 0}, size={1366, 768}, attached=true, refresh=60, name=
16:52:07.285: Loading up D3D11 on adapter Intel(R) HD Graphics (0)
16:52:07.291: D3D11 loaded successfully, feature level used: a000
16:52:07.291: DXGI increase maximum frame latency success
16:52:08.658: ---------------------------------
16:52:08.658: video settings reset:
16:52:08.658: base resolution: 1366x768
16:52:08.658: output resolution: 1092x614
16:52:08.658: downscale filter: Bicubic
16:52:08.658: fps: 30/1
16:52:08.658: format: NV12
16:52:08.658: YUV mode: 601/Partial
16:52:08.658: NV12 texture support not available
16:52:08.659: Audio monitoring device:
16:52:08.659: name: Padrão
16:52:08.659: id: default
16:52:08.659: ---------------------------------
16:52:08.704: [CoreAudio encoder]: CoreAudio AAC encoder not installed on the system or couldn't be loaded
16:52:08.721: Failed to load 'en-US' text for module: 'decklink-ouput-ui.dll'
16:52:08.982: [AMF] Unable to load 'amfrt64.dll', error code 126.
16:52:08.986: [AMF] AMF Test failed due to one or more errors.
16:52:08.986: Failed to initialize module 'enc-amf.dll'
16:52:09.305: [obs-browser]: Version 2.8.6
16:52:09.551: Failed to load 'pt-BR' text for module: 'obs-virtualoutput.dll'
16:52:09.634: Couldn't find VLC installation, VLC video source disabled
16:52:09.690: A DeckLink iterator could not be created. The DeckLink drivers may not be installed
16:52:09.691: No blackmagic support
16:52:09.745: ---------------------------------
16:52:09.745: Loaded Modules:
16:52:09.745: win-wasapi.dll
16:52:09.745: win-mf.dll
16:52:09.745: win-dshow.dll
16:52:09.745: win-decklink.dll
16:52:09.745: win-capture.dll
16:52:09.745: vlc-video.dll
16:52:09.745: text-freetype2.dll
16:52:09.745: rtmp-services.dll
16:52:09.745: obs-x264.dll
16:52:09.745: obs-vst.dll
16:52:09.745: obs-virtualoutput.dll
16:52:09.745: obs-transitions.dll
16:52:09.745: obs-text.dll
16:52:09.745: obs-qsv11.dll
16:52:09.745: obs-outputs.dll
16:52:09.745: obs-filters.dll
16:52:09.745: obs-ffmpeg.dll
16:52:09.745: obs-browser.dll
16:52:09.745: image-source.dll
16:52:09.745: frontend-tools.dll
16:52:09.745: enc-amf.dll
16:52:09.745: decklink-ouput-ui.dll
16:52:09.745: coreaudio-encoder.dll
16:52:09.745: ---------------------------------
16:52:09.745: ==== Startup complete ===============================================
16:52:09.751: Service '' not found
16:52:09.759: All scene data cleared
16:52:09.759: ------------------------------------------------
16:52:09.833: WASAPI: Device 'Alto-falantes (USB Audio Device)' [48000 Hz] initialized
16:52:09.833: [Loaded global audio device]: 'Desktop Ãudio'
16:52:09.960: WASAPI: Device 'Microfone / Entrada de linha (IDT High Definition Audio CODEC)' [44100 Hz] initialized
16:52:09.960: [Loaded global audio device]: 'Mic/Aux'
16:52:09.977: adding 46 milliseconds of audio buffering, total audio buffering is now 46 milliseconds (source: Mic/Aux)
16:52:09.977:
16:52:10.258: [window-capture: 'PP'] update settings:
16:52:10.258: executable: POWERPNT.EXE
16:52:10.259: Switched to scene 'Intro'
16:52:10.259: ------------------------------------------------
16:52:10.259: Loaded scenes:
16:52:10.259: - scene 'Intro':
16:52:10.261: - source: 'Fundo_Intro' (image_source)
16:52:10.261: - scene 'Filmadora':
16:52:10.261: - source: 'USB' (dshow_input)
16:52:10.261: - scene 'Film+Slide':
16:52:10.261: - source: 'USB' (dshow_input)
16:52:10.261: - source: 'PP' (window_capture)
16:52:10.261: - source: 'Fundo' (image_source)
16:52:10.262: - scene 'Slide':
16:52:10.262: - source: 'PP' (window_capture)
16:52:10.262: ------------------------------------------------
16:52:10.314: USB: data.GetDevice failed
16:52:10.314: USB: Video configuration failed
16:52:51.059: Failed to read log file C:\Users\Yves\AppData\Roaming\obs-studio/crashes/
 
I

#_I_can_solve_it_#

New Member
You guys are wasting your time ...the only best way to convert DV camera footage via firewire or usb is as follows :

I use linux:

1. install DVGRAB and use this to record your DV video via firewire or usb onto your hard drive which will be in .dv format which is raw....just make sure that your camcoder has usb /firewire "STREAMING" set to "ON" position.

2. Because a 60 min sp tape the size of the recording will be between 13-15 gigabytes ....large isn't it !

3. Using the program FFMPEG convert the .dv file to the format of your choice .mp4 .mkv.....

I have managed to compress a 13.5gig .dv video to 1.5gig .mp4 and .mkv with very little loss....you just need a good cpu or even better render it through your GPU if you have a good graphics card ..I use a NVIDIA card and used it with 264_nvenc encoder I installed via ffmpeg .....you will have to learn how to use both dvgrab and ffmpeg and install the 264_nvenc encoder, it's not difficult at all
 
I

#_I_can_solve_it_#

New Member
keanu_yves said:
Using OBS with the notebook's internal webcam, everything works fine. But when I connect a USB capture device, after a few minutes, the PC shuts down.

The integrated webcam is old and with low resolution, I want to be able to use my camcorder.

Log:

16:52:06.597: CoInitializeEx succeeded: 0x00000001
16:52:06.598: CPU Name: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz
16:52:06.598: CPU Speed: 2527MHz
16:52:06.598: Physical Cores: 2, Logical Cores: 4
16:52:06.598: Physical Memory: 7990MB Total, 5493MB Free
16:52:06.598: Windows Version: 10.0 Build 19041 (release: 2004; revision: 450; 64-bit)
16:52:06.598: Running as administrator: true
16:52:06.598: Aero is Enabled (Aero is always on for windows 8 and above)
16:52:06.598: Windows 10 Gaming Features:
16:52:06.598: Game DVR: On
16:52:06.601: Sec. Software Status:
16:52:06.603: Microsoft Defender Antivírus: disabled (AV)
16:52:06.604: Avast Antivirus: enabled (AV)
16:52:06.604: Firewall do Windows: enabled (FW)
16:52:06.605: Current Date/Time: 2020-09-17, 16:52:06
16:52:06.605: Browser Hardware Acceleration: true
16:52:06.605: Portable mode: false
16:52:07.258: OBS 25.0.8 (64-bit, windows)
16:52:07.258: ---------------------------------
16:52:07.260: ---------------------------------
16:52:07.260: audio settings reset:
16:52:07.260: samples per sec: 44100
16:52:07.260: speakers: 2
16:52:07.277: ---------------------------------
16:52:07.277: Initializing D3D11...
16:52:07.277: Available Video Adapters:
16:52:07.281: Adapter 0: Intel(R) HD Graphics
16:52:07.281: Dedicated VRAM: 67108864
16:52:07.281: Shared VRAM: 1711276032
16:52:07.281: PCI ID: 8086:46
16:52:07.282: Driver Version: 8.15.10.2900
16:52:07.282: output 0: pos={0, 0}, size={1366, 768}, attached=true, refresh=60, name=
16:52:07.285: Loading up D3D11 on adapter Intel(R) HD Graphics (0)
16:52:07.291: D3D11 loaded successfully, feature level used: a000
16:52:07.291: DXGI increase maximum frame latency success
16:52:08.658: ---------------------------------
16:52:08.658: video settings reset:
16:52:08.658: base resolution: 1366x768
16:52:08.658: output resolution: 1092x614
16:52:08.658: downscale filter: Bicubic
16:52:08.658: fps: 30/1
16:52:08.658: format: NV12
16:52:08.658: YUV mode: 601/Partial
16:52:08.658: NV12 texture support not available
16:52:08.659: Audio monitoring device:
16:52:08.659: name: Padrão
16:52:08.659: id: default
16:52:08.659: ---------------------------------
16:52:08.704: [CoreAudio encoder]: CoreAudio AAC encoder not installed on the system or couldn't be loaded
16:52:08.721: Failed to load 'en-US' text for module: 'decklink-ouput-ui.dll'
16:52:08.982: [AMF] Unable to load 'amfrt64.dll', error code 126.
16:52:08.986: [AMF] AMF Test failed due to one or more errors.
16:52:08.986: Failed to initialize module 'enc-amf.dll'
16:52:09.305: [obs-browser]: Version 2.8.6
16:52:09.551: Failed to load 'pt-BR' text for module: 'obs-virtualoutput.dll'
16:52:09.634: Couldn't find VLC installation, VLC video source disabled
16:52:09.690: A DeckLink iterator could not be created. The DeckLink drivers may not be installed
16:52:09.691: No blackmagic support
16:52:09.745: ---------------------------------
16:52:09.745: Loaded Modules:
16:52:09.745: win-wasapi.dll
16:52:09.745: win-mf.dll
16:52:09.745: win-dshow.dll
16:52:09.745: win-decklink.dll
16:52:09.745: win-capture.dll
16:52:09.745: vlc-video.dll
16:52:09.745: text-freetype2.dll
16:52:09.745: rtmp-services.dll
16:52:09.745: obs-x264.dll
16:52:09.745: obs-vst.dll
16:52:09.745: obs-virtualoutput.dll
16:52:09.745: obs-transitions.dll
16:52:09.745: obs-text.dll
16:52:09.745: obs-qsv11.dll
16:52:09.745: obs-outputs.dll
16:52:09.745: obs-filters.dll
16:52:09.745: obs-ffmpeg.dll
16:52:09.745: obs-browser.dll
16:52:09.745: image-source.dll
16:52:09.745: frontend-tools.dll
16:52:09.745: enc-amf.dll
16:52:09.745: decklink-ouput-ui.dll
16:52:09.745: coreaudio-encoder.dll
16:52:09.745: ---------------------------------
16:52:09.745: ==== Startup complete ===============================================
16:52:09.751: Service '' not found
16:52:09.759: All scene data cleared
16:52:09.759: ------------------------------------------------
16:52:09.833: WASAPI: Device 'Alto-falantes (USB Audio Device)' [48000 Hz] initialized
16:52:09.833: [Loaded global audio device]: 'Desktop Ãudio'
16:52:09.960: WASAPI: Device 'Microfone / Entrada de linha (IDT High Definition Audio CODEC)' [44100 Hz] initialized
16:52:09.960: [Loaded global audio device]: 'Mic/Aux'
16:52:09.977: adding 46 milliseconds of audio buffering, total audio buffering is now 46 milliseconds (source: Mic/Aux)
16:52:09.977:
16:52:10.258: [window-capture: 'PP'] update settings:
16:52:10.258: executable: POWERPNT.EXE
16:52:10.259: Switched to scene 'Intro'
16:52:10.259: ------------------------------------------------
16:52:10.259: Loaded scenes:
16:52:10.259: - scene 'Intro':
16:52:10.261: - source: 'Fundo_Intro' (image_source)
16:52:10.261: - scene 'Filmadora':
16:52:10.261: - source: 'USB' (dshow_input)
16:52:10.261: - scene 'Film+Slide':
16:52:10.261: - source: 'USB' (dshow_input)
16:52:10.261: - source: 'PP' (window_capture)
16:52:10.261: - source: 'Fundo' (image_source)
16:52:10.262: - scene 'Slide':
16:52:10.262: - source: 'PP' (window_capture)
16:52:10.262: ------------------------------------------------
16:52:10.314: USB: data.GetDevice failed
16:52:10.314: USB: Video configuration failed
16:52:51.059: Failed to read log file C:\Users\Yves\AppData\Roaming\obs-studio/crashes/
Click to expand...
Hi , is your pc shutting down the normal way like when you click power of ...or does it just switch off like a power cut ?

If it power cuts then the issue is with your power supply psu can't output enough power or is too warn out , get a more powerful PSU then the one you have.

Or try my above comment option
 
You must log in or register to reply here.
Top