Question / Help Overload Encoding, Settings help.

[masterpleb5000]

Recently getting a lot of overload encoding while streaming. Been streaming for a year now and not very often do I change my OBS settings but the last week or so, I've been experiencing lag about every hour with my stream. Please take a look at my setting and specs and let me know if you see anything that might be causing this.

Log File > https://gist.github.com/b0c5eed91932b2d2484b1838d5437dfd

• CPU: Intel® Core™ i7-6700 3.4GHZ
• Motherboard: GIGABYTE G1 Gaming GA-H170
• RAM: Mushkin Enhanced Blackline 16GB (2 x 8GB) 288-Pin DDR4
• Video Card: ASUS GeForce GTX 1070 8GB
• Power Supply: SeaSonic G Series SSR-550RM 550W
• Hard Drive: PNY CS1311 120GB 2.5” SATA III Internal Solid State Drive (SSD)
• Secondary Hard Drive: WD Blue 1TB Desktop Hard Disk Drive - 7200 RPM +

 

[fatmatrow]

Don't use rescaling on stream output, it uses CPU if I remember correctly

 

[masterpleb5000]

Bump

 

[Adrian Schofield]

There's no stream in your log to help us understand what is wrong. Please do a test stream and make sure the log contains "Streaming Stopped" before uploading.

 

[masterpleb5000]

The log I posted was after a 8 hour stream I think. Not sure how to get a "Streaming Stopped" in there

 

[R@de]

Change the YUV colour space back to 601, 709 has more overhead and probably the cause of your problem.

 

[masterpleb5000]

Did not help

 

[R@de]

Try putting the process priority back to normal (default).

 

[masterpleb5000]

Seems to of help a little, but I've still seen a few minutes of Overload Encoding in a 8 hour stream. Going to load another log file.
https://gist.github.com/419a8c4b764df4629569a7188d61bfd3

 

[Harold]

And if you switch your encoder to x264?