OBS used on a multimedia PC (Windows 10 professional) with an Nvidia GT640 driving 4 screens (2 monitors, 1 TV, 1 projector). Screens are as follows:
monitor 1: position (-1366,0) resolution 1366x768
monitor 2: position (0,0) resolution 1920x1080
TV: position (1920,0) resolution 1920x1080
projector: position (3640,0) resolution 1920x1080
The problematic output is the TV, as if its power is cut, the HDMI signal is totally lost, and the PC does not see it among the displays. Now, this screen is set in a Display Capture source, and if the power is cut, then the projector jumps into the position of the TV (1920,0) and OBS is capturing its screen. If, however, the power is back, TV gets beck into (1920,0) pushing the projector to (3640,0), which is expected BUT OBS does not jump back to capturing the content of the TV (1920,0) but moves with the projector's display to (3640,0) capturing its screen content.
I also reproduced the issue messing with the resolution of the TV, and OBS jumped to the next screen (projector) automatically.
Is there a way to ALWAYS capture the screen area of the SECOND display (1920,0) with the resolution of 1920x1080? Or is this (screen jumping) a bug?
monitor 1: position (-1366,0) resolution 1366x768
monitor 2: position (0,0) resolution 1920x1080
TV: position (1920,0) resolution 1920x1080
projector: position (3640,0) resolution 1920x1080
The problematic output is the TV, as if its power is cut, the HDMI signal is totally lost, and the PC does not see it among the displays. Now, this screen is set in a Display Capture source, and if the power is cut, then the projector jumps into the position of the TV (1920,0) and OBS is capturing its screen. If, however, the power is back, TV gets beck into (1920,0) pushing the projector to (3640,0), which is expected BUT OBS does not jump back to capturing the content of the TV (1920,0) but moves with the projector's display to (3640,0) capturing its screen content.
I also reproduced the issue messing with the resolution of the TV, and OBS jumped to the next screen (projector) automatically.
Is there a way to ALWAYS capture the screen area of the SECOND display (1920,0) with the resolution of 1920x1080? Or is this (screen jumping) a bug?