Question / Help NVENC HEVC get some gray mosaic on 1080p-60f, no problem with 30F [SOLVED]

sumirecccp

sumirecccp

New Member
my version is windows 64bit 4.1 static version.
other parameters:(2 patterns)
bufsize=100m preset=hq rc=vbr_hq cq=18 rc-lookahead=60 qmin=18 qmax=26 qdiff=6 bf=4

or

preset=hq rc=constqp qp=18

how to compare? just install that version and use OBS as usual?
 
Suslik V

Suslik V

Active Member
Just re-encode some video with ffmpeg using mentioned codec. If this is ffmpeg bug it should appear in the video too.
Do you need full command line options for ffmpeg to complete the task (for both 3.4 and let's say 4.1)?
 
sumirecccp

sumirecccp

New Member
I tried this and have no problem with ffmpeg 4.1.
ffmpeg -i "F:\new1\c-op.mp4" -b:v 60m -c:v hevc_nvenc -bufsize 100m -preset hq -rc vbr_hq -cq 18 -rc-lookahead 60 -qmin 18 -qmax 26 -bf 4 -refs 3 -c:a copy "F:\new1\c-op-nvenc-test1.mp4"

ffmpeg -i "F:\new1\c-op.mp4" -b:v 60m -c:v hevc_nvenc -bufsize 100m -preset hq -rc vbr_hq -cq 18 -rc-lookahead 60 -qmin 18 -qmax 26 -bf 4 -refs 3 -c:a copy "F:\new1\c-op-nvenc-test2.ts"

ffmpeg -i "F:\new1\c-op.mp4" -b:v 60m -c:v hevc_nvenc -bufsize 100m -preset hq -rc vbr_hq -cq 18 -rc-lookahead 60 -qmin 18 -qmax 26 -bf 4 -refs 3 -c:a copy "F:\new1\c-op-nvenc-test3.mkv"

TS format will have some seek-bar issue, the other two are OK.
https://drive.google.com/file/d/1aEGohg-9YSNlOIvDu3B7N-f5xJbCeYYj/view?usp=sharing
https://drive.google.com/file/d/1qzCdM2od28tZyd2JJDhhXG_iu0Xu_6MJ/view?usp=sharing
https://drive.google.com/file/d/1tpgHjwC-_bZj_OR3yX9fS-86ueH0ocQp/view?usp=sharing
 
sumirecccp

sumirecccp

New Member
That's no problem, I test original command under ffmpeg 4.1 too, and get same good result ,except the ts format.
ffmpeg 3.4 tested, result is same as 4.1.
 
Suslik V

Suslik V

Active Member
You have tested almost latest release (links above), so, I think it will not.

Maybe encoder just overloaded. Try to lower resolution in OBS output while preserving same framerate - if it helps, that only means that you need to exclude most demanding options of the encoding (disable B-frames, set higher preset etc.)
 
XboxMik29

XboxMik29

New Member
sumirecccp said:
PROBLEM SOLVED.
JUST CLOSE THE DESTINATION FOLDER'S NTFS COMPRESS FUNCTION.

=========

hello, my graphic card is RTX2080, and when I set framerate to 60, I will get some ramdom gray mosaic.
ffplay log:
[hevc @ 00000298ed20c3c0] Could not find ref with POC 1230B f=0/0
[hevc @ 00000298ed20c3c0] Could not find ref with POC 122
[hevc @ 00000298ed34a000] Duplicate POC in a sequence: 124. f=0/0
[hevc @ 00000298ed34a000] Error parsing NAL unit #2.
[hevc @ 00000298ed34ea00] Duplicate POC in a sequence: 124.
[hevc @ 00000298ed34ea00] Error parsing NAL unit #2.
[hevc @ 00000298ed34a000] Could not find ref with POC 68 0B f=0/0
[hevc @ 00000298ed34a000] Could not find ref with POC 67
[hevc @ 00000298ed34a000] Could not find ref with POC 66
[hevc @ 00000298ed34ea00] Duplicate POC in a sequence: 69.
[hevc @ 00000298ed34ea00] Error parsing NAL unit #2.
[hevc @ 00000298ecf6f8c0] Duplicate POC in a sequence: 69.B f=0/0
[hevc @ 00000298ecf6f8c0] Error parsing NAL unit #2.
[hevc @ 00000298ecf3e480] Duplicate POC in a sequence: 69.
[hevc @ 00000298ecf3e480] Error parsing NAL unit #2.
[hevc @ 00000298ecf6f8c0] Could not find ref with POC 1520B f=0/0
[hevc @ 00000298ecf6f8c0] Could not find ref with POC 151
[hevc @ 00000298ecf6f8c0] Could not find ref with POC 150
[hevc @ 00000298ecf6f8c0] Could not find ref with POC 1490B f=0/0
[hevc @ 00000298ecf3e480] Duplicate POC in a sequence: 153.
[hevc @ 00000298ecf3e480] Error parsing NAL unit #2.

etc.

but it's ok in 30f mode, and when I try another soft Bandicam using HEVC-60fps ,there's no problem too.
Any idea to solve this problem?

ADD: OBS LOG
13:27:59.843: CPU Name: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz
13:27:59.843: CPU Speed: 3392MHz
13:27:59.843: Physical Cores: 4, Logical Cores: 8
13:27:59.843: Physical Memory: 16318MB Total, 4449MB Free
13:27:59.843: Windows Version: 10.0 Build 17763 (revision: 253; 64-bit)
13:27:59.843: Running as administrator: false
13:27:59.843: Aero is Enabled (Aero is always on for windows 8 and above)
13:27:59.843: Windows 10 Gaming Features:
13:27:59.843: Game Bar: On
13:27:59.843: Game DVR: On
13:27:59.843: Game DVR Background Recording: Off
13:27:59.843: Game Mode: On
13:27:59.847: Sec. Software Status:
13:27:59.850:
13:27:59.851:
13:27:59.851:
13:27:59.852: Browser Hardware Acceleration: true
13:27:59.852: Portable mode: false
13:28:00.128: OBS 22.0.2 (64-bit, windows)
13:28:00.128: ---------------------------------
13:28:00.133: ---------------------------------
13:28:00.133: audio settings reset:
13:28:00.133: samples per sec: 48000
13:28:00.133: speakers: 2
13:28:00.165: ---------------------------------
13:28:00.165: Initializing D3D11...
13:28:00.167: Available Video Adapters:
13:28:00.171: Adapter 1: NVIDIA GeForce RTX 2080
13:28:00.171: Dedicated VRAM: 4104126464
13:28:00.171: Shared VRAM: 4260395008
13:28:00.171: output 1: pos={0, 0}, size={3840, 2160}, attached=true
13:28:00.205: Loading up D3D11 on adapter NVIDIA GeForce RTX 2080 (0)
13:28:00.316: D3D11 loaded successfully, feature level used: 45056
13:28:01.319: ---------------------------------
13:28:01.319: video settings reset:
13:28:01.319: base resolution: 1280x720
13:28:01.319: output resolution: 1280x720
13:28:01.319: downscale filter: Lanczos
13:28:01.319: fps: 60000/1001
13:28:01.319: format: I420
13:28:01.319: YUV mode: 709/Partial
13:28:01.321: Audio monitoring device:
13:28:01.321: name: 既定
13:28:01.321: id: default
13:28:01.325: ---------------------------------
13:28:01.658: Required module function 'obs_module_load' in module '../../obs-plugins/64bit/chrome_elf.dll' not found, loading of module failed
13:28:01.676: [CoreAudio encoder]: CoreAudio AAC encoder not installed on the system or couldn't be loaded
13:28:01.817: [AMF] AMF Test failed due to one or more errors.
13:28:01.817: Failed to initialize module 'enc-amf.dll'
13:28:02.240: Required module function 'obs_module_load' in module '../../obs-plugins/64bit/libcef.dll' not found, loading of module failed
13:28:02.271: LoadLibrary failed for '../../obs-plugins/64bit/libEGL.dll': The specified procedure could not be found.
13:28:02.271: (127)
13:28:02.271: Module '../../obs-plugins/64bit/libEGL.dll' not loaded
13:28:02.350: Required module function 'obs_module_load' in module '../../obs-plugins/64bit/libGLESv2.dll' not found, loading of module failed
13:28:02.427: [obs-browser]: Version 2.1.5
13:28:02.620: NVENC supported
13:28:02.990: Couldn't find VLC installation, VLC video source disabled
13:28:03.052: No blackmagic support
13:28:03.143: ---------------------------------
13:28:03.143: Loaded Modules:
13:28:03.143: win-wasapi.dll
13:28:03.143: win-mf.dll
13:28:03.143: win-ivcam.dll
13:28:03.143: win-dshow.dll
13:28:03.143: win-decklink.dll
13:28:03.143: win-capture.dll
13:28:03.143: vlc-video.dll
13:28:03.143: text-freetype2.dll
13:28:03.143: rtmp-services.dll
13:28:03.143: obs-x264.dll
13:28:03.143: obs-vst.dll
13:28:03.143: obs-transitions.dll
13:28:03.143: obs-text.dll
13:28:03.143: obs-qsv11.dll
13:28:03.143: obs-outputs.dll
13:28:03.143: obs-filters.dll
13:28:03.143: obs-ffmpeg.dll
13:28:03.143: obs-browser.dll
13:28:03.143: image-source.dll
13:28:03.143: frontend-tools.dll
13:28:03.143: enc-amf.dll
13:28:03.143: coreaudio-encoder.dll
13:28:03.143: ---------------------------------
13:28:03.143: ==== Startup complete ===============================================
13:28:03.165: All scene data cleared
13:28:03.165: ------------------------------------------------
13:28:03.192: [window-capture: 'ウィンドウキャプチャ'] update settings:
13:28:03.192: executable: firefox.exe
13:28:03.234: WASAPI: Device 'VoiceMeeter Output (VB-Audio Cable A)' initialized
13:28:03.234: Switched to scene 'シーン'
13:28:03.261: ------------------------------------------------
13:28:03.261: Loaded scenes:
13:28:03.261: - scene 'シーン':
13:28:03.261: - source: 'ウィンドウキャプチャ' (window_capture)
13:28:03.261: - source: '音声入力キャプチャ' (wasapi_input_capture)
13:28:03.261: ------------------------------------------------
13:28:03.282: adding 64 milliseconds of audio buffering, total audio buffering is now 64 milliseconds
13:28:03.900: CalculateFileHash: Failed to open file 'C:\Users\Snowball\AppData\Roaming\obs-studio\updates\whatsnew.json':
13:28:07.579: ---------------------------------
13:28:07.579: video settings reset:
13:28:07.579: base resolution: 1920x1080
13:28:07.579: output resolution: 1920x1080
13:28:07.579: downscale filter: Lanczos
13:28:07.579: fps: 60000/1001
13:28:07.579: format: I420
13:28:07.579: YUV mode: 709/Partial
13:28:07.585: Audio monitoring device:
13:28:07.585: name: 既定
13:28:07.585: id: default
13:28:07.600: Switched to profile '1920x1080 hevc' (1920x1080_hevc)
13:28:07.600: ------------------------------------------------
13:29:05.194: Switched to scene '(null)'
13:29:05.194: WASAPI: Device 'VoiceMeeter Output (VB-Audio Cable A)' Terminated
13:29:05.199: All scene data cleared
13:29:05.199: ------------------------------------------------
13:29:05.200: [window-capture: 'ウィンドウキャプチャ'] update settings:
13:29:05.200: executable: firefox.exe
13:29:05.222: WASAPI: Device 'VoiceMeeter Output (VB-Audio Cable A)' initialized
13:29:05.224: Switched to scene 'シーン'
13:29:05.224: ------------------------------------------------
13:29:05.225: Loaded scenes:
13:29:05.225: - scene 'シーン':
13:29:05.225: - source: 'ウィンドウキャプチャ' (window_capture)
13:29:05.225: - source: '音声入力キャプチャ' (wasapi_input_capture)
13:29:05.225: ------------------------------------------------
13:29:05.235: Switched to scene collection 'channel1080' (channel1080.json)
13:29:05.235: ------------------------------------------------
13:29:15.007: ==== Recording Start ===============================================
13:30:39.924: Output 'adv_ffmpeg_output': stopping
13:30:39.924: Output 'adv_ffmpeg_output': Total frames output: 5086
13:30:39.924: Output 'adv_ffmpeg_output': Total drawn frames: 5162
13:30:39.925: ==== Recording Stop ================================================
Click to expand...
Please could you tell how you did that, I'm having this exact issue, Thanks
 
Zidakuh

Zidakuh

Member
XboxMik29 said:
Please could you tell how you did that, I'm having this exact issue, Thanks
Click to expand...
Open file Explorer, go to "Computer" or "This Computer" (I don't know the formatting exactly, I am using a different language for windows than English) and right click the drive you save your recordings to, then go to "Properties".

At the bottom of the window that pops up, there should be an option called something like: "Compress this harddrive to save diskspace" or something similar. Disable that, apply and OK.
 
You must log in or register to reply here.
Top