ndi problem when connecting two computers via ndi

I

Ihadone

New Member
I have a configuration of two computers. I use ndi for obs. I divided the tracks with sound and held them separately on the second PC. I was getting delays relative to the video. By setting the delay mode low ( experimental) on the PC stream, the problem with the sound and video out of sync was solved, but I got micro lags on the stream. This is also noticeable in the preview on the PC stream. In the "statistics" tab, there are no losses in any of the parameters. Everything is fine on the gaming PC. I attach 2 log files from both PCs. I hope my question is clearly stated. Maybe someone will tell you what the problem is based on the event log files.
 

Attachments

update network dirvers and a tip dont use third party security software the defender make the same job look that all PC are set to high perfomance in the energy settings !
 
cyclemat,
Thanks for the reply. I will remove the antivirus. The drivers are the latest on both PCs. The power supply is all for maximum performance of both PCs.
 
the problem persists. There is no frame loss. according to statistics, everything is fine, visually micro lags are noticeable on the stream and on the second PC
 
have you check it with the NDI tools aka NDI Monitor ?

have you enabled hardware acceleration in the NDI source ?
 
please tell me how to check this using the ndi monitor tool? hardware acceleration, what is on, what is off, no difference. on the second PC there is a gt440 graphics card, could this be the reason?
 
downlaod the NDI monitor from the NDI tools https://www.ndi.tv/tools/

start it on the PC where you received the the NDI Stream and look if you have stuttering

try use NDI HX on the source PC to capture the video ! a gt440 is very old ! and didnt have much features and not many ram !
 
cyclemat said:
downlaod the NDI monitor from the NDI tools https://www.ndi.tv/tools/

start it on the PC where you received the the NDI Stream and look if you have stuttering

try use NDI HX on the source PC to capture the video ! a gt440 is very old ! and didnt have much features and not many ram !
Click to expand...
In general, everything is fine in all respects. I seem to have already confused myself. If it's not difficult for you, please watch my video at the link. Start viewing from 00:48:00. Are there any visual problems? https://www.twitch.tv/videos/1406221973
 
i see that fast scenes you pc pixelate the question is its an NDI problem or an OBs encoding problem did i see right you have a founders on site of you and use the smal GPU in your streaming PC ? have you tried the ndi HX tool on the gaming PC ?
 
Last edited:
If you look at the preview in the obs on the first PC, then everything is fine. On the second streaming PC, microlags are visible on the preview, and there are no problems in the statistics. There are no questions about the quality it is the friezes that are bothering micro lags
 
You must log in or register to reply here.
Back
Top