Question / Help Elgato HD60 Pro 2PC Setup Audio fix!

IIBADII

New Member
I recently purchased the PCI HD60Pro to replace my Avermedia LGP and LGX (Horrible software with the LGX). For 2 days straight I could not seem to fix my audio problems on the hd60. I see a lot of people struggling. The only thing I would be able to get is a pop every now and then on the audio. I'm using VAC to push the HDMI audio from my gaming computer to my streaming computer.

Simple fix-Make sure all the sample rates on all transmitting and receiving components are set at 48hz (2 channel if you can, I can do 6 ch. It crashes VAC and the card only supports 2ch as it is). These settings are under "Properties" when you right-click your Playback device.

This is for those of you using any program to push audio through HDMI. I have noticed that I get a slight pop of interferance every once and awhile and the audio delay is horrible about .5 sec. Seems pretty steam from Avermedia's products but thats an easy fix.

I'm actually going to be purchasing an Soundblaster Z PCIe sound card with a spdif input so I can just get rid of this problem completely and never have to deal with pushing sound through hdmi again. Haha. What a headache it's been. Hopefully I could have saved some people from destroying this card, I about did.
 
Top