I bought a DigitNow! captre/streaming card to connect to my camera. I follwed all the manufacturer's instruction and some v but am unable to get it wrking. However all I get is 'No Vide'. although the blue light on the box flickering, showing some signal from the camera's HDMI link. I can see images recorded on the cameras SD card via the set up but no live images appear. I used an HP laptop, with WIndows 10 Updated, drivers show as working and ready. ALso a desktop with similarly updated windows 10. I used a Lumix DMC-LF1 and one Canon Powershot SX1 IS, 10Mega Pixel, and for both the situation is the same.
I ordered another box from Amazon and the second box is behaving the same when using all the above combinations: 'No Video'. But can see images recorded on the SD card inside the camera.
I must be doing something wrong (not the connections or cables as different ones were used). It must be a subtle setting or an incompatibility with my caeras or ...
Can anyone help please? I would be very grateful.
I ordered another box from Amazon and the second box is behaving the same when using all the above combinations: 'No Video'. But can see images recorded on the SD card inside the camera.
I must be doing something wrong (not the connections or cables as different ones were used). It must be a subtle setting or an incompatibility with my caeras or ...
Can anyone help please? I would be very grateful.