Question / Help Decklink output issue

R

Rayrog

New Member
Hello i am using u blackamgic intensity shullte for input of my video switcher in OBS.
I want to use the menu function Decklink output for viewing the output of OBS to a monitor so i can see what i am doing.
But when i set the program output to the decklink output i only see the input picture of the video switcher.



log: https://obsproject.com/logs/x_PxonRIhru1bCTc
 
Hello Rayrog.
I don't think that the input and output of the Blackmagic Intensity Shuttle can be used independently (as you are trying to do). I'm sure that you will either be able to use it for input to OBS or display the output of OBS on a monitor, but not both. Similarly, if you are using your Blackmagic Intensity Shuttle in OBS for output (for example), you will not be able to capture video into Blackmagic Media Express as you only have one channel of input/output.
I have an older Decklink Quad card which has 4 input connectors and 4 output connectors, yet I can only use a maximum of two inputs and two outputs at any one time. The newer Decklink Quad 2 does allow independent use of any combination of 8 inputs and 8 outputs, but is obviously more expensive. The Blackmagic Intensity Shuttle doesn't have the hardware to use input and output independently in a similar manner to the Quad 2.
Hope this is of some help!
 
Helle Multicam Mike.

Thanks for the answer, i Thought that is worked that way unfortnuatly.
The thing that made me think it should work was that there was only an output when OBS is started.
Now to find an other way the get the output on a HMDI monitor
 
You must log in or register to reply here.
Back
Top