Question / Help Could not initialize DirectX10 on Intel(R) Graphics

Status
Not open for further replies.

Mogwai

New Member
Hi there. I just downloaded this program, and when I try to test record this message appears.

I suspect it may be due to the fact that my ladtop does is not good enough.

Here's my log:

Code:
19:53:44: Settings::Video: Enabling Aero
19:53:48: Open Broadcaster Software v0.622b - 32bit (´・ω・`)
19:53:48: -------------------------------
19:53:48: CPU Name: Intel(R) Celeron(R) CPU        P4500  @ 1.87GHz
19:53:48: CPU Speed: 1862MHz
19:53:48: Physical Memory:  2927MB Total, 1208MB Free
19:53:48: stepping id: 2, model 37, family 6, type 0, extmodel 1, extfamily 0, HTT 1, logical cores 2, total cores 2
19:53:48: monitor 1: pos={0, 0}, size={1366, 768}
19:53:48: Windows Version: 6.1 Build 7601 S
19:53:48: Aero is Enabled
19:53:48: -------------------------------
19:53:48: OBS Modules:
19:53:48: Base Address     Module
19:53:48: 003D0000         OBS.exe
19:53:48: 5EAD0000         OBSApi.dll
19:53:48: 71A80000         DShowPlugin.dll
19:53:48: 71F10000         GraphicsCapture.dll
19:53:48: 71DE0000         NoiseGate.dll
19:53:48: 72EC0000         PSVPlugin.dll
19:53:48: ------------------------------------------
19:53:48: Adapter 1
19:53:48:   Video Adapter: Intel(R) HD Graphics
19:53:48:   Video Adapter Dedicated Video Memory: 67108864
19:53:48:   Video Adapter Shared System Memory: 1266380800
19:53:48:   Video Adapter Output 1: pos={0, 0}, size={1366, 768}, attached=true
19:53:48: =====Stream Start: 2014-04-29, 19:53:48===============================================
19:53:48:   Multithreaded optimizations: On
19:53:48:   Base resolution: 1366x768
19:53:48:   Output resolution: 1364x768
19:53:48: ------------------------------------------
19:53:48: Loading up D3D10 on Intel(R) HD Graphics (Adapter 1)...
19:53:48: D3D10CreateDeviceAndSwapChain1: Failed on Intel(R) HD Graphics: 0x80004002. Trying compatibility mode
19:53:48: D3D10CreateDeviceAndSwapChain1: Failed on Intel(R) HD Graphics: 0x80004002

Error: Could not initialize DirectX 10 on Intel(R) HD Graphics.  This error can happen for one of the following reasons:

1.) Your GPU is not supported (DirectX 10 is required - note that many integrated laptop GPUs do not support DX10)
2.) You're running Windows Vista without the "Platform Update"
3.) Your video card drivers are out of date

If you are using a laptop with NVIDIA Optimus or AMD Switchable Graphics, make sure OBS is set to run on the high performance GPU in your driver settings.
 

Jack0r

The Helping Squad
1.) Your GPU is not supported (DirectX 10 is required - note that many integrated laptop GPUs do not support DX10)
 

Mogwai

New Member
I figured, thanks for the fast reply. Well, I purchased my capture card for nothing. Should have known my Laptop was utter crap.
 
Status
Not open for further replies.
Top