Can't use "configure video" to adjust brightness when using OBS and ATEM Mini

[RaptureReady]

I used to use the configure video panel to adjust brightness, contrast and saturation settings. Recently we added a atem mini and those settings are there, but in a fixed position.

We have 3 Sony EVI H100V PTZ Cameras, an Asus gl 553vd I-7 7700 laptop with 32 gb ram gtx1050 and the atem mini. The video is a little too dark. We are livestreaming through facebook in a church, so additional lighting isn't an option. I reset the camera software auto white balance to indoors, and bumped up the gain to the max.

I am hoping there is an easier fix than setting the cameras to manual and adjusting it that way.

 

[carlmmii]

First, check that your color space is set correctly. If you're using a video capture source, verify that you are set to "Partial" (not "Full").

If further adjustment is needed, right-click on your source, go to Filters. Click the "+" at the bottom and add a Color Correction filter.