BOTH Low Stream Bitrate AND Max VIdeo Bitrate Exceeded

You have a configuration issue (#3) so I didn't bother to go through the entire log, I actually stopped right here:

10:26:32.568: audio settings reset:
10:26:32.568: samples per sec: 48000
10:26:32.568: speakers: 2
10:26:32.568: max buffering: 21 milliseconds
10:26:32.568: buffering type: fixed
10:26:32.570: ---------------------------------

10:26:32.570: Initializing D3D11...
10:26:32.570: Available Video Adapters:
10:26:32.571: Adapter 0: AMD Radeon RX 7900 XTX
10:26:32.571: Dedicated VRAM: 25707913216 (23.9 GiB)
10:26:32.571: Shared VRAM: 16704772096 (15.6 GiB)
10:26:32.571: PCI ID: 1002:744c
10:26:32.571: HAGS Status: Disabled (Default: No, Driver status: Unsupported)
10:26:32.572: Driver Version: 32.0.31041.1004
10:26:32.573: output 0:
10:26:32.573: name=VG27AQ1A
10:26:32.573: pos={0, 0}
10:26:32.573: size={2560, 1440}
10:26:32.573: attached=true
10:26:32.573: refresh=120
10:26:32.573: bits_per_color=10
10:26:32.573: space=RGB_FULL_G22_NONE_P709
10:26:32.573: primaries=[r=(0.677734, 0.309570), g=(0.265625, 0.663086), b=(0.148438, 0.052734), wp=(0.313477, 0.329102)]
10:26:32.573: relative_gamut_area=[709=1.307270, P3=0.963682, 2020=0.691377]
10:26:32.573: sdr_white_nits=80
10:26:32.573: nit_range=[min=0.000000, max=603.698425, max_full_frame=603.698425]
10:26:32.573: dpi=96 (100%)
10:26:32.573: id=\\?\DISPLAY#AUS2707#7&131a9964&0&UID512#{e6f07b5f-ee97-4a90-b076-33f57bf4eaa7}
10:26:32.573: alt_id=\\.\DISPLAY2
10:26:32.574: output 1:
10:26:32.574: name=ASUS VE278
10:26:32.574: pos={-1920, 350}
10:26:32.574: size={1920, 1080}
10:26:32.574: attached=true
10:26:32.574: refresh=60
10:26:32.574: bits_per_color=8
10:26:32.574: space=RGB_FULL_G22_NONE_P709
10:26:32.574: primaries=[r=(0.647461, 0.333984), g=(0.284180, 0.607422), b=(0.151367, 0.071289), wp=(0.313477, 0.329102)]
10:26:32.574: relative_gamut_area=[709=1.031160, P3=0.760141, 2020=0.545350]
10:26:32.574: sdr_white_nits=80
10:26:32.574: nit_range=[min=0.500000, max=270.000000, max_full_frame=270.000000]
10:26:32.574: dpi=96 (100%)
10:26:32.574: id=\\?\DISPLAY#ACI27F6#7&131a9964&0&UID524#{e6f07b5f-ee97-4a90-b076-33f57bf4eaa7}
10:26:32.574: alt_id=\\.\DISPLAY3

10:26:32.574: Adapter 1: AMD Radeon(TM) Graphics
10:26:32.574: Dedicated VRAM: 509353984 (0.5 GiB)
10:26:32.574: Shared VRAM: 16704772096 (15.6 GiB)
10:26:32.574: PCI ID: 1002:164e
10:26:32.574: HAGS Status: Disabled (Default: No, Driver status: Unsupported)
10:26:32.575: Driver Version: 32.0.21045.5002
10:26:32.576: output 0:
10:26:32.576: name=S27D390
10:26:32.576: pos={2560, 350}
10:26:32.576: size={1920, 1080}
10:26:32.576: attached=true
10:26:32.576: refresh=60
10:26:32.576: bits_per_color=8
10:26:32.576: space=RGB_FULL_G22_NONE_P709

10:26:32.576: primaries=[r=(0.639648, 0.330078), g=(0.299805, 0.599609), b=(0.149414, 0.059570), wp=(0.312500, 0.329102)]
10:26:32.576: relative_gamut_area=[709=0.999839, P3=0.737052, 2020=0.528786]
10:26:32.576: sdr_white_nits=80
10:26:32.576: nit_range=[min=0.500000, max=270.000000, max_full_frame=270.000000]
10:26:32.576: dpi=96 (100%)
10:26:32.576: id=\\?\DISPLAY#ACI24C5#7&131a9964&0&UID516#{e6f07b5f-ee97-4a90-b076-33f57bf4eaa7}
10:26:32.576: alt_id=\\.\DISPLAY6
10:26:32.576: Loading up D3D11 on adapter AMD Radeon RX 7900 XTX (0)
10:26:32.591: Enabling fixed audio buffering, total audio buffering is now 21 milliseconds

1. Disable low latency mode.
2. Your main monitor is running 10-bit color, it should be 8-bit like the rest of your monitors. Most likely the Color Bit Depth Setting in the AMD Control Panel. https://www.amd.com/en/resources/support-articles/faqs/DH3-008.html
3. Connect your S27D390 to your GPU, it's currently connected to your mobo (iGPU)

Test & see if there's any improvement.
 
You have a configuration issue (#3) so I didn't bother to go through the entire log, I actually stopped right here:

1. Disable low latency mode.
2. Your main monitor is running 10-bit color, it should be 8-bit like the rest of your monitors. Most likely the Color Bit Depth Setting in the AMD Control Panel. https://www.amd.com/en/resources/support-articles/faqs/DH3-008.html
3. Connect your S27D390 to your GPU, it's currently connected to your mobo (iGPU)

Test & see if there's any improvement.
Thank you so much!
1: I forgot I had low latency mode on, I was having an audio issue more than a year ago and turning that on fixed it but I'm on a whole new setup now
2: I didn't even realize it being on 10 bit could cause issues
3: All 4 of my GPU ports are filled with 3 monitors and my VR headset, the 4th monitor plugged into my motherboard is almost always off and in another room, it's mirrored to one of my secondary monitors for watching things while I cook. Could this cause issues and should I leave it unplugged until I need it?
 
Back
Top