Blank media source

N

newteks

New Member
I have HikVision IP Camera and I broadcast live in
rtmp://video1.earthcam.com/myearthcam
using
OBS 27.2.4 installed to an UBUNTU 20.04.4 LTS PC using the following settings in OBS media source input field:
rtsp://USERNAME:PASSWORD@192.168.0.41/Streaming/Channels/101

Now if I pass the same settings in the following PC
Intel® Core™ i3-4130 CPU @ 3.40GHz × 4
Mesa Intel® HD Graphics 4400 (HSW GT2)
Ubuntu 22.04 LTS
Gnome version 42.2
Windowing System X11

I simply get a black screen and no feed from the camera. Even at the properties I get the same.

This is a fresh installation of UBUNTU.

In the log file attached it says
MP: Failed to open media: 'rtsp://admin:password@192.168.0.41/Streaming/Channels/101'
but why on my other PCs connected on the same network it works fine.

please advice
 

Attachments

  • obs.png
    obs.png
    87.6 KB · Views: 20
  • log.txt
    5.4 KB · Views: 11
N

newteks

New Member
What about

08:35:44.620: A DeckLink iterator could not be created. The DeckLink drivers may not be installed
08:35:44.620: No blackmagic support
 
Tuna

Tuna

Member
newteks said:
I get a
  • See small red square in the upper left which is not resizable then disappears.
also.

so there is no solution for it I guess.
I will probably have to install windows 7 basic in a virtual box and run OBS from there.
Click to expand...
That issue linked was reported from Windows. So it is most likely not platform dependent.

Try the VLC source or the GStreamer plugin instead for RTSP streams in the meantime. Or downgrade OBS to lower version mentioned in the issue.
 
Tuna

Tuna

Member
newteks said:
What about

08:35:44.620: A DeckLink iterator could not be created. The DeckLink drivers may not be installed
08:35:44.620: No blackmagic support
Click to expand...
That's normal if you don't have the Decklick capture card drivers installed.
 
You must log in or register to reply here.
Top