Adding sound to video

[MarkOBS]

I have a bunch of cameras in a scene and want to add sound to my recordings.
The tricky part to start is that I don't know which number (0,3,4,7) corresponds to which camera.
There are two cameras in the same room, one in the next room.
A fourth cam is in another room but isn't in this scene.

I am getting echo right now when I make a recording so it seems that the mics on at least two
cams are active when recording.
How can turn off the mics (in OBS) on the cams I don't want to record with in a scene?

Also how can I figure out which mic number (0,3,4,7) corresponds to which camera.

 

[Babs Johnson]

Each scene would have an audio monitor for it source in the audio mixer section on OBS. If the audio is coming through you should see it moving, just mute or bring the audio down on the camera you don't want.
If you've labeled the sources properly, you should see that appears on top of each audio meter in the mixer section.

 

[MarkOBS]

Each scene would have an audio monitor for it source in the audio mixer section on OBS. If the audio is coming through you should see it moving, just mute or bring the audio down on the camera you don't want.
If you've labeled the sources properly, you should see that appears on top of each audio meter in the mixer section.

Thanks.
I was able to locate a video on audio input.
That was most of my problem right there.
I didn't know that I needed to add an Audio Input!
I hadn't added any. :(
After I got that straightened out I just needed to figure out which audio input
was coming from each camera.
A few of the cameras are in different rooms so it was tricky to test.

Finally I muted the audio input from the cameras I didn't want to record from.
That took care of the echo problem I had.

 

[Babs Johnson]

Thanks.
I was able to locate a video on audio input.
That was most of my problem right there.
I didn't know that I needed to add an Audio Input!
I hadn't added any. :(
After I got that straightened out I just needed to figure out which audio input
was coming from each camera.
A few of the cameras are in different rooms so it was tricky to test.

Finally I muted the audio input from the cameras I didn't want to record from.
That took care of the echo problem I had.

Wonderful, happy streaming.