¿Puedo enviar una señal con Alpha desde un OBS a otro OBS en otra computadora?

imel03

New Member
Ayuda con este tema.
Tengo esta configuracion:
*PC 1, Pluggin NDI + 1 fuente de cámara (con capturadora de video)
*PC 2 Final circuito, Pluggin NDI, gráfica y señal de video switcher. Recibe señal Computadora 1 la cual se encuentra en otro espacio.
La PC 1 trabaja como Picture in Picture en la PC 2, pero el operador de la PC 1, habilita y deshabilita la señal de video de allí.
la PC 2 debe recibir esa señal, sin que quede el negro de la fuente de la PC1 cuand el operador saca la señal de la computadora 1.

Se puede hacer? mandando la señal de programa de la pc1 por hdmi, y capturando con capturadora en la pc 2 se ve el negro como sólido y no la transparecia.
con Ndi se puede hacer que el program de la pc1 salga con la transparencia?
 

AaronD

Active Member
NDI does support transparency. I use it in a church rig to display song lyrics at the bottom, with a background that fades into the camera for most of the frame. That fade requires transparency from the lyric machine, and it works. The sending end is not OBS though. It's a paid projection app that's made for churches. The receiving end *is* OBS, with the NDI plugin, so you should be good on that side like I am.

The question, then, is "how to get OBS to *send* transparency?" I don't have a direct answer for that, but I can at least narrow down the problem to that end of the wire.
 

AaronD

Active Member
You might also ask in the Discussion thread for the NDI plugin:
 

imel03

New Member
@AaronD gracias por la respuesta!
Exacto, quiero saber hay forma de que el "program" de PC1 salga con alpha para recibirlo como fuente en la pc de streaming....
El trabajo que se debe hacer es así
PC 1 ---- una sola cámara en pantalla completa, allí un operador tiene que habilitar y deshablitar la fuente.
PC 2---- recibir esa fuente y transfomrar en picture in picture. y que no salga NEGRO cuando el operador de PC 1 deshabilite la fuente en su programa.
 

AaronD

Active Member
Let's zoom out a bit. Why does it have to be like this? Or *does* it have to be like this?

So far, you've only said that PC 1 has a camera, OBS, an operator, and a feed to PC 2. It sounds to me like PC 2 does all the production work, and PC 1 is just a translator from whatever the camera is to something long-distance. The operator at PC 1 only has one button that sends the camera or blank, and nothing else to do.

So: Why not replace PC 1 and its operator, with an always-on translator from the camera to PC 2 that does nothing else, and then make all the decisions at PC 2?
If the camera is HDMI (hinted at by your mention of a video capture), then you can convert it to SDI instead of USB, run the SDI on a TV antenna cable, and convert it back to HDMI for the same video capture that is now on PC 2 to pick up.
(converter each direction, and adapters to use them with standard TV cable)
 
Last edited:

imel03

New Member
Excelente inquietud @AaronD. En 1ra instancia. Dificultad espacial
El operador de la PC 1 será alguien del equipo de Lengua de seña. Ellos pueden estar al aire sólo 20 minutos y rotar con otro intérprete. Para eso, deben salir del aire y no siempre son 20 minutos exactos.
Para evitar un teléfono descompuesto para saber cuando debe salir del aire para intercambio, se decidió que lo hará el propio equipo de intérpretes .

Ellos habilitan y deshabilitan su cámara en el OBS de la PC1. Sólo eso porque no tienen conocimiento de los dispositivos de streaming .

Nosotros nos encargamos del resto de la transmisión. PC2 (gráfica, conmutador, reproductor, sonido, etc etc) .
y el uso de NDI es que todo se encuentra en la misma red.
 

AaronD

Active Member
Okay. If it's sign language, then I assume there's no (useful) audio? Both HDMI and SDI carry audio, so what if you take over the audio channel to do something else:
  1. Put a sinewave, noise, or other signal into the camera's audio jack. Doesn't matter what it is, because it won't be heard. Just make sure that it never stops on its own. (live radio is probably not good) The interpreter controls this on or off at the camera end.
  2. In OBS on PC 2, route that audio source to nowhere, but have the Advanced Scene Switcher plugin listen to it. When it's present, show the source. When it's absent, hide it.

As before, PC 1 goes away entirely, replaced with the HDMI -> SDI -> HDMI converters that are always on, and the capture card moves to PC 2.
 
Top