OBS Log Analyzer

Your log contains streaming sessions with dropped frames. This can only be caused by a failure in your internet connection or your networking hardware. It is not caused by OBS. Follow the troubleshooting steps at: Dropped Frames and General Connection Issues.

Critical Hardware-accelerated GPU Scheduler

The Hardware-accelerated GPU scheduling ("HAGS") feature added with Windows 10 is currently known to cause performance and capture issues with OBS, games and overlay tools. It's an experimental feature and we recommend disabling it via this screen or these instructions.

Warning Wi-Fi Streaming

In many cases, wireless connections can cause issues because of their unstable nature. Streaming really requires a stable connection. Often wireless connections are fine, but if you have problems, the first troubleshooting step would be to switch to wired. We highly recommend streaming on wired connections.

Warning Lenovo Vantage

Lenovo Vantage / Legion Edge is installed and is known to cause connection issues while streaming. Open Lenovo Vantage and set the "Network Boost" feature to disabled when streaming with OBS.

Warning Capture Interference

Display and Game Capture Sources interfere with each other. Never put them in the same scene.

Warning Multiple Game Capture

Multiple Game Capture sources are usually not needed, and can sometimes interfere with each other. You can use the same Game Capture for all your games! If you change games often, try out the hotkey mode, which lets you press a key to select your active game. If you play games in fullscreen, use 'Capture any fullscreen application' mode.

Info Windows 11 24H2 (OK)

You are running Windows 11 24H2, which will be supported by Microsoft until October 2026.

Info 0.1% Rendering Lag

Your GPU is maxed out and OBS can't render scenes fast enough. Running a game without vertical sync or a frame rate limiter will frequently cause performance issues with OBS because your GPU will be maxed out. OBS requires a little GPU to render your scene.

Enable Vsync or set a reasonable frame rate limit that your GPU can handle without hitting 100% usage.

If that's not enough you may also need to turn down some of the video quality options in the game. If you are experiencing issues in general while using OBS, your GPU may be overloaded for the settings you are trying to use.

Please check our guide for ideas why this may be happening, and steps you can take to correct it: GPU Overload Issues.

Info 0.1% Encoder Overload

Encoder overload may be related to your CPU or GPU being overloaded, depending on the encoder in question. If you are using a software encoder (x264) please see the CPU Overload Guide. If you are using a hardware encoder (AMF, QSV/Quicksync, NVENC) please see the GPU Overload Guide.

Info Low Stream Bitrate

Your stream encoder is set to a video bitrate that is too low. This will lower picture quality especially in high motion scenes like fast paced games. Use the Auto-Config Wizard to adjust your settings to the optimum for your situation. It can be accessed from the Tools menu in OBS, and then just follow the on-screen directions.

Info Third-Party Plugins (1)

You have the following third-party plugins installed:

input-overlay