Text Indicator in Advanced Scene Switcher

[gentina]

First of all, I tried configuring the advanced scene switch to simply display the recording status on the window projector.
The following picture shows the adjustments made several times.
Even if I start recording and press pause, the text source does not always change from 'Recording: {GV:recording_state}.
I don't know what the problem is
Please give me some advice~

This is the order from the top
① macro → recording_state on
② macro → recording_state off
③ general & variables tab, window projector from text source, variable properties

 

[Warmuptill]

The syntax to use variables in text fields is ${variable name here}.
So you seem to be missing the $ symbol in the action changing the text to be displayed by the text source.

 

[gentina]

The syntax to use variables in text fields is ${variable name here}.
So you seem to be missing the $ symbol in the action changing the text to be displayed by the text source.

Thank you for your answer.
However, it seems that the set to fixed value of the two macros is a structure that overwrites the text source.
So I added $ symbol to set to fixed value and entered it as 'Recording: ${GV:recording_state}' and tested it.
Nevertheless, the recording status indication is not substituted on or off.
On the Variables tab, it is switched on and off, so it looks normal
Reinstalling the advanced scene switch to an older version does not change anything
And I don't know if there's any connection, but if I choose Set to macro property on the source side, it says that the value name should be seen, but it just seems empty.

Is there something I'm mistaken about?

 

[Warmuptill]

In the screenshots form your original message I can see that the variable is named recording_state.
So to reference this variable you will have to use ${recording_state}.
I am not sure what the purpose of the additional GV: prefix is supposed to be, but that is probably the reason why the variable value is not being resolved.

 

[gentina]

In the screenshots form your original message I can see that the variable is named recording_state.
So to reference this variable you will have to use ${recording_state}.
I am not sure what the purpose of the additional GV: prefix is supposed to be, but that is probably the reason why the variable value is not being resolved.

As you said, I took away the GV and the text display works fine.^^
But in the old version, there was a condition called unpaired
If I resume recording in a paused state, it doesn't switch from off to on. May I know if there is a way to implement 'unpaused'?

 

[Warmuptill]

But in the old version, there was a condition called unpaired

Unfortunately, I don't know what you are referring to.
If you want the variable to also have the value "off" when the recording is paused you can add another condition to check for that like this:

But you will then also have to adjust the "on" macro accordingly as well:

Or you simply combine both - setting the variable to "on" and "off" - into a single macro like this:

If you want to import this example macro you can use this code:

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

Hope this helps!

---

A bit off topic:
In general, if you have questions regarding the Advanced Scene Switcher plugin, it is often better to ask in the plugin's discussion thread. :)

 

[gentina]

안타깝게도, 당신이 말씀하시는 것이 무엇인지 모르겠습니다.
녹음이 일시 정지되었을 때 변수의 값도 "off"가 되기를 원한다면 다음과 같이 이를 확인하는 또 다른 조건을 추가할 수 있습니다.

View attachment 114043

하지만 그러면 "켜짐" 매크로도 그에 맞게 조정해야 합니다.

View attachment 114044

또는 두 가지 변수를 "켜기"와 "끄기"로 설정하여 다음과 같이 단일 매크로로 결합할 수도 있습니다.

View attachment 114045

이 예제 매크로를 가져오려면 다음 코드를 사용할 수 있습니다.
[코드]AAASr3ic7Vdtb9tGDP4rwmEfts7y/BKkjb+lmYsZSFIvTvNlCIqzREm3SHfC3cl1FuS/j9Tp1W5SOAO2oUiAAAKPD8kjH5LnB5bxQCvDZn88MMkzYDMWqGwtJIRswGKtipzNIp4aGLCcFwZWfAPvIeEboTSbjSppR0fzNIW0EQQJBHdnSobCC iXNQi53NZQ8S7iMWxvmTuTzLQQf5cpybVu5Vflp4MxEl8r+qmQLotASpe2Z0EEh7HzD04KTblfjrEAbWRPNGcW2kBY0arcRP6v0wMgydD5Gw8nJzt+A2fucjh7RrRS2TNQGtCnjGaM0VMHdCqwVMjZkS0MsDPpooki4uSrk+8JaglhdONmSsr0nxTzZw pzzdSetiYiTFP/tImrTf62LNmW6tn8NWwyRoT9W1bMnL30yusn+2Scnw9Og58RFVCm1/j2uwaOwhz3EBwroOUgZMWEob4sQFXi4McYv2euT0D/mb8cno/GxH02jiX8UTSKfT9fvfBgHRzwYj6bHfMp2qlDCHaUah6s8FRYrsVRGOP5ga+TUIpPR28dB 9X188nhb4ecYmrPxNHTaIkcErMv9m7J3cG/6LeaECL5tct4VWRXHKSx3xW02S7cG4gyk7XIsUGnKc4OdvdcSfeoEXRm7uPfS8nPAQPJ1SnjHvF4uBVVFQ6B0iA5ROVWxCErmh4UuW/FChSISRPIHZkUGnzFmYzUX0nWIAbqE+XqTjb7VVI80IbiFnssX 2/ofZXA8mvz7ORz/8xwiKXnwXzNyw7UgFWr96vPS7bkm05/dlVuFSaWxkHhbEXq13DOQQnkjRnnSNy4XTEURCmSR3Tyfp aZFq0qV+ViEWzbzMd2mWK+sxniqrdda6dpotcRf8JQSjhfYLjnNIvTFhm9YJbvgNkhKj18HRkKGV6RICi633dVuRWdPqry qbQ3EuNAZDXDPKo8kpds85QH0zyqh90XYpA4NB3Ak4uf8uhL33GbcJvNtrsG4srMfvbH3szfx3nhT7yfvF++IdTi11CrL2/eEkHlhaxk7RROx9MqsUIx10WfOwqJUpqgTlYadRS32DpjvA70XPIvX9f2SpRuhlaRy3/RJ+Gk1v1peffywOJ8TpwKQsGp Iri3uSjOoH2cML20hy9FM71jULCpJv7vnSrsLxC1kCN3ij7vFD4WuHY9KfiPLzkHGWKMnEDkPqYHw/YbRHL1DhnMD13Vmm stQZZdFtga9x+l+Z3RV58ibjr/RjmqMV8G5BPQkiyndjhZ/GiV/L0DjNmQ/DI3KYCgBV2w4dIacxu79e5Y7KcPRBc1a/+7 Hl3ydXq/T63V6fU/Tq6xrXS0aYLck3XQEze99i47ce9Pgb/vTNochRLxIbT0mGD2KK0yGlOUxvATjifAgGD2C5UEIehbjTMzyg1BrLr3mxXtwgB7CD0JhU2pMxcG45nKHI12dJy8BTQ8C7a+mb2GbnwrYBIXja4fRbDycjoYT9vg3JrZWQQ==[/코드]

도움이 되길 바랍니다!

---

주제에서 조금 벗어나서:
일반적으로 Advanced Scene Switcher 플러그인에 관한 질문이 있는 경우, 플러그인의 토론 스레드에 질문하는 것이 더 좋습니다. :)

The capture guide helped me a lot and thank you so much~