Bug Report RTSP streams are not working anymore in 25.0.4

P

pgpetike

New Member
They were fine before now, I'm getting the log results below and nothing comes through from those sources:
23:14:28.602: [Media Source 'Media Source']: settings:
23:14:28.602: input: rtsp://192.168.0.199:554/live/0
23:14:28.602: input_format: rtsp
23:14:28.602: speed: 100
23:14:28.602: is_looping: no
23:14:28.602: is_hw_decoding: no
23:14:28.602: is_clear_on_media_end: no
23:14:28.602: restart_on_activate: yes
23:14:28.602: close_when_inactive: yes
23:14:28.603: [ffmpeg] [tcp @ 0000016a5fa68d80] Starting connection attempt to 192.168.0.199 port 554
23:14:28.623: [ffmpeg] [tcp @ 0000016a5fa68d80] Successfully connected to 192.168.0.199 port 554
23:14:28.638: [ffmpeg] [rtsp @ 0000016a5f433900] SDP:
23:14:28.638: v=0
23:14:28.638: o=- 946729433719231 0 IN IP4 0.0.0.0
23:14:28.638: a=type:broadcast
23:14:28.638: t=0 0
23:14:28.638: s=brovotech
23:14:28.638: a=tool:Brovotech Streaming Media
23:14:28.638: c=IN IP4 0.0.0.0
23:14:28.638: t=0 0
23:14:28.638: a=control:*
23:14:28.638: a=range:npt=0-
23:14:28.638: m=video 0 RTP/AVP 96
23:14:28.638: a=rtpmap:96 H265/90000
23:14:28.638: a=fmtp:96 packetization-mode=1;sprop-vps=@ÿÿ`;sprop-sps=B`;sprop-pps=DÀòð<
23:14:28.638: a=Media_header:MEDIAINFO=494D4B48010100000400050010710110401F000000F4010000000000000000000000000000000000;
23:14:28.638: a=control:track0
23:14:28.638: m=audio 0 RTP/AVP 0
23:14:28.638: a=rtpmap:0 PCMU/8000
23:14:28.638: a=control:track1
23:14:28.638:

23:14:28.639: [ffmpeg] [udp @ 0000016a5f4816c0] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
23:14:28.639: [ffmpeg] [udp @ 0000016a5f482dc0] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
23:14:28.650: [ffmpeg] [rtsp @ 0000016a5f433900] setting jitter buffer size to 500
23:14:28.651: [ffmpeg] [udp @ 0000016a5f482ac0] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
23:14:28.651: [ffmpeg] [udp @ 0000016a5f4812c0] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
23:14:28.669: [ffmpeg] [rtsp @ 0000016a5f433900] setting jitter buffer size to 500
23:14:35.817: [ffmpeg] [rtsp @ 0000016a5f433900] Could not find codec parameters for stream 0 (Video: hevc, none): unspecified size
23:14:35.817: Consider increasing the value for the 'analyzeduration' and 'probesize' options
23:14:35.921: [Media Source 'Media Source']: settings:
23:14:35.921: input: rtsp://192.168.0.199:554/live/0
23:14:35.921: input_format: rtsp
23:14:35.921: speed: 100
23:14:35.921: is_looping: no
23:14:35.921: is_hw_decoding: no
23:14:35.921: is_clear_on_media_end: no
23:14:35.921: restart_on_activate: no
23:14:35.921: close_when_inactive: yes
23:14:35.922: [ffmpeg] [tcp @ 0000016a5fa68140] Starting connection attempt to 192.168.0.199 port 554
23:14:35.931: [ffmpeg] [tcp @ 0000016a5fa68140] Successfully connected to 192.168.0.199 port 554
23:14:35.946: [ffmpeg] [rtsp @ 0000016a5f433900] SDP:
23:14:35.946: v=0
23:14:35.946: o=- 946729441026362 0 IN IP4 0.0.0.0
23:14:35.946: a=type:broadcast
23:14:35.946: t=0 0
23:14:35.946: s=brovotech
23:14:35.946: a=tool:Brovotech Streaming Media
23:14:35.946: c=IN IP4 0.0.0.0
23:14:35.946: t=0 0
23:14:35.946: a=control:*
23:14:35.946: a=range:npt=0-
23:14:35.946: m=video 0 RTP/AVP 96
23:14:35.946: a=rtpmap:96 H265/90000
23:14:35.946: a=fmtp:96 packetization-mode=1;sprop-vps=@ÿÿ`;sprop-sps=B`;sprop-pps=DÀòð<
23:14:35.946: a=Media_header:MEDIAINFO=494D4B48010100000400050010710110401F000000F4010000000000000000000000000000000000;
23:14:35.946: a=control:track0
23:14:35.946: m=audio 0 RTP/AVP 0
23:14:35.946: a=rtpmap:0 PCMU/8000
23:14:35.946: a=control:track1
23:14:35.946:

23:14:35.946: [ffmpeg] [udp @ 0000016a5f4814c0] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
23:14:35.947: [ffmpeg] [udp @ 0000016a5f482cc0] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
23:14:35.957: [ffmpeg] [rtsp @ 0000016a5f433900] setting jitter buffer size to 500
23:14:35.957: [ffmpeg] [udp @ 0000016a5f481bc0] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
23:14:35.957: [ffmpeg] [udp @ 0000016a5f482dc0] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
23:14:35.972: [ffmpeg] [rtsp @ 0000016a5f433900] setting jitter buffer size to 500
 
Temporary workaround until it gets fixed:

1) Run the following command in the folder of VLC player (typically: c:\Program Files\VideoLAN\VLC) Choose a port number if you want to use a different port from 8080 like dst=9999 will use the TCP 9999). This will open a VLC instance which transcodes the stream from RTMP to HTTP

vlc --rtsp-tcp rtsp://192.168.2.84/live_stream --sout=#transcode{scodec=none}:http{mux=ffmpeg{mux=flv},dst=:8080/} :no-sout-all :sout-keep

2) Edit the media source and instead of using the rtsp URL use the following one: http://localhost:8080/ (where the 8080 represents your desired port). It will work.
 
pgpetike said:
They were fine before now, I'm getting the log results below and nothing comes through from those sources:
23:14:28.602: [Media Source 'Media Source']: settings:
23:14:28.602: input: rtsp://192.168.0.199:554/live/0
23:14:28.602: input_format: rtsp
23:14:28.602: speed: 100
23:14:28.602: is_looping: no
23:14:28.602: is_hw_decoding: no
23:14:28.602: is_clear_on_media_end: no
23:14:28.602: restart_on_activate: yes
23:14:28.602: close_when_inactive: yes
23:14:28.603: [ffmpeg] [tcp @ 0000016a5fa68d80] Starting connection attempt to 192.168.0.199 port 554
23:14:28.623: [ffmpeg] [tcp @ 0000016a5fa68d80] Successfully connected to 192.168.0.199 port 554
23:14:28.638: [ffmpeg] [rtsp @ 0000016a5f433900] SDP:
23:14:28.638: v=0
23:14:28.638: o=- 946729433719231 0 IN IP4 0.0.0.0
23:14:28.638: a=type:broadcast
23:14:28.638: t=0 0
23:14:28.638: s=brovotech
23:14:28.638: a=tool:Brovotech Streaming Media
23:14:28.638: c=IN IP4 0.0.0.0
23:14:28.638: t=0 0
23:14:28.638: a=control:*
23:14:28.638: a=range:npt=0-
23:14:28.638: m=video 0 RTP/AVP 96
23:14:28.638: a=rtpmap:96 H265/90000
23:14:28.638: a=fmtp:96 packetization-mode=1;sprop-vps=@ÿÿ`;sprop-sps=B`;sprop-pps=DÀòð<
23:14:28.638: a=Media_header:MEDIAINFO=494D4B48010100000400050010710110401F000000F4010000000000000000000000000000000000;
23:14:28.638: a=control:track0
23:14:28.638: m=audio 0 RTP/AVP 0
23:14:28.638: a=rtpmap:0 PCMU/8000
23:14:28.638: a=control:track1
23:14:28.638:

23:14:28.639: [ffmpeg] [udp @ 0000016a5f4816c0] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
23:14:28.639: [ffmpeg] [udp @ 0000016a5f482dc0] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
23:14:28.650: [ffmpeg] [rtsp @ 0000016a5f433900] setting jitter buffer size to 500
23:14:28.651: [ffmpeg] [udp @ 0000016a5f482ac0] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
23:14:28.651: [ffmpeg] [udp @ 0000016a5f4812c0] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
23:14:28.669: [ffmpeg] [rtsp @ 0000016a5f433900] setting jitter buffer size to 500
23:14:35.817: [ffmpeg] [rtsp @ 0000016a5f433900] Could not find codec parameters for stream 0 (Video: hevc, none): unspecified size
23:14:35.817: Consider increasing the value for the 'analyzeduration' and 'probesize' options
23:14:35.921: [Media Source 'Media Source']: settings:
23:14:35.921: input: rtsp://192.168.0.199:554/live/0
23:14:35.921: input_format: rtsp
23:14:35.921: speed: 100
23:14:35.921: is_looping: no
23:14:35.921: is_hw_decoding: no
23:14:35.921: is_clear_on_media_end: no
23:14:35.921: restart_on_activate: no
23:14:35.921: close_when_inactive: yes
23:14:35.922: [ffmpeg] [tcp @ 0000016a5fa68140] Starting connection attempt to 192.168.0.199 port 554
23:14:35.931: [ffmpeg] [tcp @ 0000016a5fa68140] Successfully connected to 192.168.0.199 port 554
23:14:35.946: [ffmpeg] [rtsp @ 0000016a5f433900] SDP:
23:14:35.946: v=0
23:14:35.946: o=- 946729441026362 0 IN IP4 0.0.0.0
23:14:35.946: a=type:broadcast
23:14:35.946: t=0 0
23:14:35.946: s=brovotech
23:14:35.946: a=tool:Brovotech Streaming Media
23:14:35.946: c=IN IP4 0.0.0.0
23:14:35.946: t=0 0
23:14:35.946: a=control:*
23:14:35.946: a=range:npt=0-
23:14:35.946: m=video 0 RTP/AVP 96
23:14:35.946: a=rtpmap:96 H265/90000
23:14:35.946: a=fmtp:96 packetization-mode=1;sprop-vps=@ÿÿ`;sprop-sps=B`;sprop-pps=DÀòð<
23:14:35.946: a=Media_header:MEDIAINFO=494D4B48010100000400050010710110401F000000F4010000000000000000000000000000000000;
23:14:35.946: a=control:track0
23:14:35.946: m=audio 0 RTP/AVP 0
23:14:35.946: a=rtpmap:0 PCMU/8000
23:14:35.946: a=control:track1
23:14:35.946:

23:14:35.946: [ffmpeg] [udp @ 0000016a5f4814c0] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
23:14:35.947: [ffmpeg] [udp @ 0000016a5f482cc0] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
23:14:35.957: [ffmpeg] [rtsp @ 0000016a5f433900] setting jitter buffer size to 500
23:14:35.957: [ffmpeg] [udp @ 0000016a5f481bc0] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
23:14:35.957: [ffmpeg] [udp @ 0000016a5f482dc0] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
23:14:35.972: [ffmpeg] [rtsp @ 0000016a5f433900] setting jitter buffer size to 500
Click to expand...

That's why I hate upgrades
 
You must log in or register to reply here.
Back
Top