PTZ REOLINK Trackmix Camera Control

[OBSMLO]

Hello All,
I have a RELINK Trackmix POE Camera. I downloaded PTZ Controls, but it seems that the camera doesn't allow using the VISCA over IP protocol.

The only assigned ports that can be opened are Media port 9000, RTSP 554 HTTP 80 HTTPS 443 RTMP 1235 and ONVIF 8000.

Is there a way to control this PTZ camera through OBS?
Are there any other solutions to use this camera accordingly?

I have no issues getting the RTSP port working to stream, I just have no PTZ control.
thanks,
Mark

 

[OBSMLO]

Hello All,
I have a RELINK Trackmix POE Camera. I downloaded PTZ Controls, but it seems that the camera doesn't allow using the VISCA over IP protocol.

The only assigned ports that can be opened are Media port 9000, RTSP 554 HTTP 80 HTTPS 443 RTMP 1235 and ONVIF 8000.

Is there a way to control this PTZ camera through OBS?
Are there any other solutions to use this camera accordingly?

I have no issues getting the RTSP port working to stream, I just have no PTZ control.
thanks,
Mark

Surprisingly, I found a work around.

I connect the Reolink software on laptop A to the camera.
I have OBS connected on laptop B.

In OBS I use Media Source: rtsp://USER:PASSWORD@192.168.X.XXX:554/h264Preview_01_main (or can use 02_main, 01_sub, etc...)

I still have some testing to do, but there is less than 1sec of lag, and this allows me to control the camera using presets in OBS.

Honestly, this has been difficult to learn. You don't know what you don't know and you learn as you go....

Initially I was using the above URL stopping at 554 which does work, but was getting hung up on the PTZ Control plugin ---

I will provide more info as the final testing gets completed.

 

[jojo2203]

Have you been able to clarify the problem with the control? Are you facing the same challenge? Can you please briefly describe your solution? Are you powering your camera via POE or the power supply? Power supply does not seem to work for me.

Thanks