PTZ Optics camera becomes very slow after entering Studio Mode

We have been running our sessions using one scene and multiple sources. However, once we started to do multiple scenes and one source per scene and tried to use Studio mode we found the IP PTZ camera to be very slow. 30 or 40 seconds would pass between the time we asked for a new scene and the reaction from the camera and sometimes it never came up in Studio mode. Restarting OBS solved the problem but we would like to make use of Preview mode if possible, Log attached. More logs are available but one is too large to load
 

Attachments

  • 2021-04-14 15-12-35.txt
    15.4 KB · Views: 3

Lawrence_SoCal

Active Member
Couple of generation old, md-range CPU without a GPU for encoding offload... When you use Studio mode you are doubling your rendering workload...
I recommend monitoring hardware resource (CPU, GPU, RAM, etc) utilization [for ex. using Task manager’s Performance tab and/or Resource Monitor] to see if your system is being maxed out with your settings, as that would explain your experience
 
Last edited:
Couple of generation old, md-range CPU with a GPU for encoding offload... When you use Studio mode you are doubling your rendering workload...
I recommend monitoring hardware resource (CPU, GPU, RAM, etc) utilization [for ex. using Task manager’s Performance tab and/or Resource Monitor] to see if your system is being maxed out with your settings, as that would explain your experience
Thanks very much for your suggestion. Will check and see if hardware is the problem.
 
Top