OBS stopped streaming this Sunday

ndimmick

New Member
Our OBS setup at church has been working well for the past few weeks. We have it running on a computer that is dedicated to our live streaming on Sunday morning. This Sunday, the operator noticed that the stream to YouTube dropped. He tried to tell OBS to start the stream multiple times but received an error message each time. He quit OBS, and after relaunching it, he was able to resume streaming without issue. That's all the info I can get from the operator. I'll paste in the log contents. If anyone has ideas about what happened, I would love to hear them. Thanks, Nick

10:12:02.788: CoInitializeEx succeeded: 0x00000001
10:12:02.788: CPU Name: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz
10:12:02.788: CPU Speed: 1800MHz
10:12:02.788: Physical Cores: 4, Logical Cores: 8
10:12:02.789: Physical Memory: 8078MB Total, 4463MB Free
10:12:02.789: Windows Version: 10.0 Build 18362 (release: 1903; revision: 1016; 64-bit)
10:12:02.789: Running as administrator: false
10:12:02.789: Aero is Enabled (Aero is always on for windows 8 and above)
10:12:02.789: Windows 10 Gaming Features:
10:12:02.789: Game DVR: On
10:12:02.791: Sec. Software Status:
10:12:02.793: Windows Defender Antivirus: enabled (AV)
10:12:02.800: Windows Firewall: enabled (FW)
10:12:02.802: Current Date/Time: 2020-09-06, 10:12:02
10:12:02.802: Browser Hardware Acceleration: true
10:12:02.802: Portable mode: false
10:12:03.191: OBS 25.0.8 (64-bit, windows)
10:12:03.191: ---------------------------------
10:12:03.192: ---------------------------------
10:12:03.192: audio settings reset:
10:12:03.192: samples per sec: 44100
10:12:03.192: speakers: 1
10:12:03.194: ---------------------------------
10:12:03.194: Initializing D3D11...
10:12:03.194: Available Video Adapters:
10:12:03.197: Adapter 0: Intel(R) UHD Graphics 620
10:12:03.197: Dedicated VRAM: 134217728
10:12:03.197: Shared VRAM: 4235610112
10:12:03.197: PCI ID: 8086:5917
10:12:03.199: Driver Version: 26.20.100.7325
10:12:03.199: output 0: pos={0, 0}, size={1920, 1080}, attached=true, refresh=60, name=
10:12:03.205: Loading up D3D11 on adapter Intel(R) UHD Graphics 620 (0)
10:12:03.242: D3D11 loaded successfully, feature level used: b000
10:12:03.243: DXGI increase maximum frame latency success
10:12:03.857: ---------------------------------
10:12:03.858: video settings reset:
10:12:03.858: base resolution: 1280x720
10:12:03.858: output resolution: 1280x720
10:12:03.858: downscale filter: Bicubic
10:12:03.858: fps: 30/1
10:12:03.858: format: NV12
10:12:03.858: YUV mode: 601/Partial
10:12:03.858: NV12 texture support not available
10:12:03.858: Audio monitoring device:
10:12:03.858: name: Default
10:12:03.858: id: default
10:12:03.858: ---------------------------------
10:12:03.862: [CoreAudio encoder]: CoreAudio AAC encoder not installed on the system or couldn't be loaded
10:12:03.866: Failed to load 'en-US' text for module: 'decklink-ouput-ui.dll'
10:12:03.917: [AMF] Unable to load 'amfrt64.dll', error code 126.
10:12:03.920: [AMF] AMF Test failed due to one or more errors.
10:12:03.920: Failed to initialize module 'enc-amf.dll'
10:12:04.010: [obs-browser]: Version 2.8.6
10:12:04.085: Couldn't find VLC installation, VLC video source disabled
10:12:04.107: A DeckLink iterator could not be created. The DeckLink drivers may not be installed
10:12:04.110: No blackmagic support
10:12:04.126: ---------------------------------
10:12:04.126: Loaded Modules:
10:12:04.126: win-wasapi.dll
10:12:04.126: win-mf.dll
10:12:04.126: win-dshow.dll
10:12:04.126: win-decklink.dll
10:12:04.126: win-capture.dll
10:12:04.126: vlc-video.dll
10:12:04.126: text-freetype2.dll
10:12:04.126: rtmp-services.dll
10:12:04.126: obs-x264.dll
10:12:04.126: obs-vst.dll
10:12:04.126: obs-transitions.dll
10:12:04.126: obs-text.dll
10:12:04.126: obs-qsv11.dll
10:12:04.126: obs-outputs.dll
10:12:04.126: obs-filters.dll
10:12:04.126: obs-ffmpeg.dll
10:12:04.126: obs-browser.dll
10:12:04.126: image-source.dll
10:12:04.126: frontend-tools.dll
10:12:04.126: enc-amf.dll
10:12:04.126: decklink-ouput-ui.dll
10:12:04.127: coreaudio-encoder.dll
10:12:04.127: ---------------------------------
10:12:04.127: ==== Startup complete ===============================================
10:12:04.134: All scene data cleared
10:12:04.134: ------------------------------------------------
10:12:04.224: WASAPI: Device 'Microphone (USB Audio CODEC )' [44100 Hz] initialized
10:12:04.225: Switched to scene 'PIP Front iPhone'
10:12:04.225: ------------------------------------------------
10:12:04.225: Loaded scenes:
10:12:04.225: - scene 'Stage':
10:12:04.225: - source: 'Panasonic Camera Capture' (dshow_input)
10:12:04.225: - filter: 'Color Correction' (color_filter)
10:12:04.225: - filter: 'Color Key' (color_key_filter)
10:12:04.225: - source: 'Berhinger In' (wasapi_input_capture)
10:12:04.225: - scene 'Proclaim':
10:12:04.225: - source: 'Proclaim Capture' (dshow_input)
10:12:04.225: - source: 'Berhinger In' (wasapi_input_capture)
10:12:04.225: - scene 'PIP':
10:12:04.225: - source: 'Panasonic Camera Capture' (dshow_input)
10:12:04.225: - filter: 'Color Correction' (color_filter)
10:12:04.225: - filter: 'Color Key' (color_key_filter)
10:12:04.225: - source: 'Proclaim Capture' (dshow_input)
10:12:04.225: - source: 'Berhinger In' (wasapi_input_capture)
10:12:04.225: - scene 'Front iPHone':
10:12:04.225: - source: 'EpocCam iPhone' (dshow_input)
10:12:04.225: - filter: 'Video Delay (Async)' (async_delay_filter)
10:12:04.225: - filter: 'Color Correction' (color_filter)
10:12:04.225: - source: 'Berhinger In' (wasapi_input_capture)
10:12:04.225: - scene 'PIP Front iPhone':
10:12:04.225: - source: 'EpocCam iPhone' (dshow_input)
10:12:04.225: - filter: 'Video Delay (Async)' (async_delay_filter)
10:12:04.225: - filter: 'Color Correction' (color_filter)
10:12:04.225: - source: 'Proclaim Capture' (dshow_input)
10:12:04.225: - source: 'Berhinger In' (wasapi_input_capture)
10:12:04.226: ------------------------------------------------
10:12:05.159: ---------------------------------
10:12:05.159: [DShow Device: 'EpocCam iPhone'] settings updated:
10:12:05.159: video device: EpocCam Camera
10:12:05.159: video path: \\?\root#media#0002#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\{4ee16166-f358-4f10-8889-93107806b7a7}
10:12:05.159: resolution: 1280x720
10:12:05.159: flip: 0
10:12:05.159: fps: 30.00 (interval: 333333)
10:12:05.159: format: NV12
10:12:05.176: ---------------------------------
10:12:05.176: [DShow Device: 'Panasonic Camera Capture'] settings updated:
10:12:05.176: video device: USB Video
10:12:05.176: video path: \\?\usb#vid_534d&pid_2109&mi_00#6&203aac67&0&0000#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global
10:12:05.176: resolution: 1280x720
10:12:05.176: flip: 0
10:12:05.176: fps: 30.00 (interval: 333333)
10:12:05.176: format: MJPEG
10:12:05.199: ---------------------------------
10:12:05.199: [DShow Device: 'Proclaim Capture'] settings updated:
10:12:05.199: video device: USB Video
10:12:05.199: video path: \\?\usb#vid_534d&pid_2109&mi_00#6&23a8647f&0&0000#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global
10:12:05.199: resolution: 1280x720
10:12:05.199: flip: 0
10:12:05.199: fps: 30.00 (interval: 333333)
10:12:05.199: format: MJPEG
10:12:07.765: [qsv encoder: 'simple_h264_stream'] settings:
10:12:07.765: rate_control: CBR
10:12:07.765: target_bitrate: 3000
10:12:07.765: fps_num: 30
10:12:07.765: fps_den: 1
10:12:07.765: width: 1280
10:12:07.765: height: 720
10:12:07.765: [qsv encoder: 'simple_h264_stream'] debug info:
10:12:07.782: impl: D3D11
10:12:07.782: surf: D3D11
10:12:07.851: m_nSurfNum: 12
10:12:07.856: m_nTaskPool: 4
10:12:07.856: major: 1
10:12:07.856: minor: 30
10:12:07.856: ---------------------------------
10:12:07.856: [FFmpeg aac encoder: 'simple_aac'] bitrate: 160, channels: 1, channel_layout: 4
10:12:07.856:
10:12:07.858: [rtmp stream: 'simple_stream'] Dynamic bitrate enabled. Dropped frames begone!
10:12:07.858: [rtmp stream: 'simple_stream'] Connecting to RTMP URL rtmp://a.rtmp.youtube.com/live2...
10:12:07.858: [rtmp stream: 'simple_stream'] Binding to IPv4
10:12:07.939: [rtmp stream: 'simple_stream'] Interface: ASIX AX88179 USB 3.0 to Gigabit Ethernet Adapter (ethernet, 1000 mbps)
10:12:08.323: [rtmp stream: 'simple_stream'] Connection to rtmp://a.rtmp.youtube.com/live2 successful
10:12:08.329: ==== Streaming Start ===============================================
10:12:11.572: [qsv encoder: 'simple_h264_recording'] settings:
10:12:11.572: rate_control: ICQ
10:12:11.572: ICQ Quality: 21
10:12:11.572: fps_num: 30
10:12:11.572: fps_den: 1
10:12:11.572: width: 1280
10:12:11.572: height: 720
10:12:11.572: [qsv encoder: 'simple_h264_recording'] debug info:
10:12:11.586: impl: D3D11
10:12:11.586: surf: D3D11
10:12:11.632: m_nSurfNum: 12
10:12:11.635: m_nTaskPool: 4
10:12:11.635: major: 1
10:12:11.635: minor: 30
10:12:11.635: ---------------------------------
10:12:11.636: [FFmpeg aac encoder: 'simple_aac_recording'] bitrate: 192, channels: 1, channel_layout: 4
10:12:11.636:
10:12:11.647: ==== Recording Start ===============================================
10:12:11.647: [ffmpeg muxer: 'simple_file_output'] Writing file 'C:/Users/ndimm/Videos/2020-09-06 10-12-11.mkv'...
10:31:31.006: User switched to scene 'Proclaim'
10:31:53.481: User switched to scene 'PIP Front iPhone'
10:32:23.022: User switched to scene 'Proclaim'
10:32:50.938: User switched to scene 'PIP Front iPhone'
10:41:26.515: User switched to scene 'Proclaim'
10:41:50.565: User switched to scene 'PIP Front iPhone'
10:42:19.844: User switched to scene 'Proclaim'
10:44:00.853: User switched to scene 'PIP Front iPhone'
10:45:27.267: User switched to scene 'Proclaim'
10:45:55.642: User switched to scene 'PIP Front iPhone'
10:47:37.712: User switched to scene 'Proclaim'
10:47:48.114: User switched to scene 'PIP Front iPhone'
10:49:17.645: User switched to scene 'Proclaim'
10:50:27.649: User switched to scene 'PIP Front iPhone'
10:51:42.281: User switched to scene 'Proclaim'
10:51:52.300: User switched to scene 'PIP Front iPhone'
10:54:26.052: User switched to scene 'Proclaim'
10:55:09.662: User switched to scene 'PIP Front iPhone'
10:56:51.205: User switched to scene 'Proclaim'
10:57:03.882: User switched to scene 'PIP Front iPhone'
10:57:54.924: User switched to scene 'Proclaim'
10:58:12.732: User switched to scene 'PIP Front iPhone'
10:58:42.991: User switched to scene 'Proclaim'
10:59:32.243: User switched to scene 'PIP Front iPhone'
11:02:43.200: User switched to scene 'Proclaim'
11:03:02.237: User switched to scene 'PIP Front iPhone'
11:06:45.600: User switched to scene 'Proclaim'
11:07:48.048: User switched to scene 'Stage'
11:14:18.211: User switched to scene 'PIP Front iPhone'
11:15:29.402: [ffmpeg muxer: 'simple_file_output'] Output of file 'C:/Users/ndimm/Videos/2020-09-06 10-12-11.mkv' stopped
11:15:29.402: Output 'simple_file_output': stopping
11:15:29.402: Output 'simple_file_output': Total frames output: 113921
11:15:29.402: Output 'simple_file_output': Total drawn frames: 113933
11:15:29.402: ==== Recording Stop ================================================
11:15:29.412: warning: 2 frames left in the queue on closing
11:15:29.474: warning: Using AVStream.codec to pass codec parameters to muxers is deprecated, use AVStream.codecpar instead.
11:15:29.474: warning: Using AVStream.codec to pass codec parameters to muxers is deprecated, use AVStream.codecpar instead.
11:15:29.475: warning: Timestamps are unset in a packet for stream 0. This is deprecated and will stop working in the future. Fix your code to set the timestamps properly
11:15:55.312: [rtmp stream: 'simple_stream'] User stopped the stream
11:15:55.312: Output 'simple_stream': stopping
11:15:55.312: Output 'simple_stream': Total frames output: 114799
11:15:55.312: Output 'simple_stream': Total drawn frames: 114824
11:15:55.319: ==== Streaming Stop ================================================
11:15:55.330: warning: 2 frames left in the queue on closing
11:15:57.718: ==== Shutting down ==================================================
11:15:57.742: Switched to scene '(null)'
11:15:58.273: WASAPI: Device 'Microphone (USB Audio CODEC )' Terminated
11:15:58.281: All scene data cleared
11:15:58.281: ------------------------------------------------
11:15:58.475: Freeing OBS context data
11:15:58.496: [Scripting] Total detached callbacks: 0
 

Attachments

  • 2020-09-06 10-12-02.txt
    12.2 KB · Views: 3

FerretBomb

Active Member
That logfile shows the user manually halting the stream, not the stream dropping. We'd need the logfile from the OBS session when the issue occurred.
We also need to know the exact error message that was received. There are a large number that it could be.
 

ndimmick

New Member
That logfile shows the user manually halting the stream, not the stream dropping. We'd need the logfile from the OBS session when the issue occurred.
We also need to know the exact error message that was received. There are a large number that it could be.
Thanks, FerretBomb. I dont' have a way of knowing the error message. I think the user first noticed that the stream had disappeared on YouTube. I wonder if there was actually nothing wrong with OBS, but something else went wrong between us and YouTube. I don't have any idea how to go about figuring that out.
 
Top