OBS problem with recording

A

Adamoo

New Member
In OBS I have no sound in the recorded video.
In speakers and headphones on the front of the panel.
The microphone works well.
OBS latest 30.1.2
KDE Neon in the latest version with Plasma 6, all updates installed continuously.
In Plasma 5.27 there were no problems with this
Nvidia drivers ver: 535.171.04 from PPA.



Linux/KDE Plasma: KDE Neon
KDE Plasma Version: 6.0.3
KDE Frameworks Version: 6.0.0
Qt Version: 6.7.0
Kernel: 6.5.0-27
Graphics platform: X11
 
A

Adamoo

New Member
qhobbes

qhobbes

Active Member
Your log contains no recording session. Results of this log analysis are limited. Please post a link to a clean log file.
To make a clean log file, please follow these steps:

1) Restart OBS.
2) Start your recording for at least 30 seconds. Make sure you replicate any issues as best you can, which means having any games/apps open and captured, etc.
3) Stop your recording.
4) Select Help > Log Files > Upload Current Log File. Send that link here.
 
L

Lawrence_SoCal

Active Member
1. You have some mismatched audio device sampling rates... ESPECIALLY on a much older CPU, usually recommended to NOT have such a mis-match... You fix at Operating System (not OBS Studio) level

As for Audio - are you sure sound getting to OBS Studio?
If yes, have you looked into/changed Advanced Audio Properties, especially regarding Monitor and/or Output? ie, hopefully you didn't set Monitor only, as that means to NOT output to Recording/Stream
And there is the common issue of multi-track recordings and a lot of software that defaults to only playing Track #1
 
A

Adamoo

New Member
Regarding point 1, where could you check it?

Advanced settings
obs audio.png
 
A

Adamoo

New Member
Lawrence_SoCal said:
1. You have some mismatched audio device sampling rates... ESPECIALLY on a much older CPU, usually recommended to NOT have such a mis-match... You fix at Operating System (not OBS Studio) level

As for Audio - are you sure sound getting to OBS Studio?
If yes, have you looked into/changed Advanced Audio Properties, especially regarding Monitor and/or Output? ie, hopefully you didn't set Monitor only, as that means to NOT output to Recording/Stream
And there is the common issue of multi-track recordings and a lot of software that defaults to only playing Track #1
Click to expand...
audioo.png


Is this correct?
 
L

Lawrence_SoCal

Active Member
Correct on 44100 & 48000, open you OBS Studio log to see which devices are at which Sampling Rate
Recommendation is to make all Audio Devices configured in OBS Studio use same Sampling Rate
This device change is done in the Operating System (not OBS Studio) ... what exactly to do depends on specific Device and Device Drivers
 
A

Adamoo

New Member
Lawrence_SoCal said:
Correct on 44100 & 48000, open you OBS Studio log to see which devices are at which Sampling Rate
Recommendation is to make all Audio Devices configured in OBS Studio use same Sampling Rate
This device change is done in the Operating System (not OBS Studio) ... what exactly to do depends on specific Device and Device Drivers
Click to expand...
Which values should I correct because I don't really understand?
 
L

Lawrence_SoCal

Active Member
Common recommendation (though .. it depends.. there is no RIGHT answer) is to set all audio devices to a sampling rate of 48000Hz
but not all devices support that
 
You must log in or register to reply here.
Top