I want to use OBS for streaming and recording my classes, but the CPU usage goes up very high. A friend who is using a windows 10 setup with a laptop with less power does not seem to have this problem.
CPU usage goes up so high that streaming to youtube stalls...
underneath the specs of my laptop.
Thank you for looking into this,
Bart
System: Host: bart-CR62-2M Kernel: 4.15.0-117-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: Cinnamon 3.6.7 (Gtk 3.18.9-1ubuntu3.3)
Distro: Linux Mint 18.3 Sylvia
Machine: System: Micro-Star product: CR62 2M v: REV:1.0
Mobo: Micro-Star model: MS-16J3 v: REV:0.B
Bios: American Megatrends v: E16J3IMS.111 date: 01/12/2016
CPU: Quad core Intel Core i7-5700HQ (-HT-MCP-) cache: 6144 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 21549
clock speeds: max: 2600 MHz 1: 2693 MHz 2: 2696 MHz 3: 2695 MHz
4: 2694 MHz 5: 2693 MHz 6: 2693 MHz 7: 2695 MHz 8: 2694 MHz
Graphics: Card: Intel HD Graphics 5600 bus-ID: 00:02.0
Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa)
Resolution: 1366x768@60.00hz, 1920x1080@60.00hz
GLX Renderer: Mesa DRI Intel HD Graphics 5600 (Broadwell GT2)
GLX Version: 3.0 Mesa 18.0.5 Direct Rendering: Yes
Audio: Card-1 Intel 8 Series/C220 Series High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0
Card-2 Intel Broadwell-U Audio Controller
driver: snd_hda_intel bus-ID: 00:03.0
Card-3 Logitech OrbiCam driver: USB Audio usb-ID: 003-002
Sound: Advanced Linux Sound Architecture v: k4.15.0-117-generic
Network: Card-1: Intel Wireless 3160 driver: iwlwifi bus-ID: 01:00.0
IF: wlp1s0 state: up mac: <filter>
Card-2: Qualcomm Atheros Killer E220x Gigabit Ethernet Controller
driver: alx port: 3000 bus-ID: 02:00.0
IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 1250.3GB (18.6% used)
ID-1: /dev/sda model: WDC_WD10JPVX size: 1000.2GB
ID-2: /dev/sdb model: Samsung_SSD_850 size: 250.1GB
ID-3: /dev/mmcblk0 model: N/A size: 63.9GB
Partition: ID-1: / size: 222G used: 183G (87%) fs: ext4 dev: /dev/sdb1
ID-2: swap-1 size: 8.50GB used: 0.00GB (0%) fs: swap dev: /dev/sdb5
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 72.0C mobo: 27.8C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 292 Uptime: 13 min Memory: 4344.7/7888.1MB
Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481) inxi: 2.2.35
CPU usage goes up so high that streaming to youtube stalls...
underneath the specs of my laptop.
Thank you for looking into this,
Bart
System: Host: bart-CR62-2M Kernel: 4.15.0-117-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: Cinnamon 3.6.7 (Gtk 3.18.9-1ubuntu3.3)
Distro: Linux Mint 18.3 Sylvia
Machine: System: Micro-Star product: CR62 2M v: REV:1.0
Mobo: Micro-Star model: MS-16J3 v: REV:0.B
Bios: American Megatrends v: E16J3IMS.111 date: 01/12/2016
CPU: Quad core Intel Core i7-5700HQ (-HT-MCP-) cache: 6144 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 21549
clock speeds: max: 2600 MHz 1: 2693 MHz 2: 2696 MHz 3: 2695 MHz
4: 2694 MHz 5: 2693 MHz 6: 2693 MHz 7: 2695 MHz 8: 2694 MHz
Graphics: Card: Intel HD Graphics 5600 bus-ID: 00:02.0
Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa)
Resolution: 1366x768@60.00hz, 1920x1080@60.00hz
GLX Renderer: Mesa DRI Intel HD Graphics 5600 (Broadwell GT2)
GLX Version: 3.0 Mesa 18.0.5 Direct Rendering: Yes
Audio: Card-1 Intel 8 Series/C220 Series High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0
Card-2 Intel Broadwell-U Audio Controller
driver: snd_hda_intel bus-ID: 00:03.0
Card-3 Logitech OrbiCam driver: USB Audio usb-ID: 003-002
Sound: Advanced Linux Sound Architecture v: k4.15.0-117-generic
Network: Card-1: Intel Wireless 3160 driver: iwlwifi bus-ID: 01:00.0
IF: wlp1s0 state: up mac: <filter>
Card-2: Qualcomm Atheros Killer E220x Gigabit Ethernet Controller
driver: alx port: 3000 bus-ID: 02:00.0
IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 1250.3GB (18.6% used)
ID-1: /dev/sda model: WDC_WD10JPVX size: 1000.2GB
ID-2: /dev/sdb model: Samsung_SSD_850 size: 250.1GB
ID-3: /dev/mmcblk0 model: N/A size: 63.9GB
Partition: ID-1: / size: 222G used: 183G (87%) fs: ext4 dev: /dev/sdb1
ID-2: swap-1 size: 8.50GB used: 0.00GB (0%) fs: swap dev: /dev/sdb5
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 72.0C mobo: 27.8C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 292 Uptime: 13 min Memory: 4344.7/7888.1MB
Init: systemd runlevel: 5 Gcc sys: 5.4.0
Client: Shell (bash 4.3.481) inxi: 2.2.35