Log files are not nonsense, they are needed to understand the settings you are using.
OBS Studio creates a log file each time you run it which contains very useful diagnostic information. Without a log file, it's much harder for any support volunteers to figure out problems and your post may be ignored. To upload a log file, go to the Help menu > Log Files > Upload Last Log...
obsproject.com
it is nonsense when i can just tell you the settings i set, and its such a robotic answer, i want real human help
17:47:06.099: audio settings reset:
17:47:06.099: samples per sec: 44100
17:47:06.099: speakers: 2
17:47:06.101: ---------------------------------
17:47:06.101: Initializing D3D11...
17:47:06.101: Available Video Adapters:
17:47:06.105: Adapter 0: NVIDIA GeForce GT 520
17:47:06.105: Dedicated VRAM: 1016332288
17:47:06.105: Shared VRAM: 1475330048
17:47:06.105: output 0: pos={0, 0}, size={1280, 1024}, attached=true
17:47:06.113: Loading up D3D11 on adapter NVIDIA GeForce GT 520 (0)
17:47:06.154: D3D11 loaded successfully, feature level used: b000
17:47:06.154: D3D11 GPU priority setup failed (not admin?)
17:47:07.252: ---------------------------------
17:47:07.252: video settings reset:
17:47:07.252: base resolution: 1920x1080
17:47:07.252: output resolution: 768x432
17:47:07.252: downscale filter: Bicubic
17:47:07.252: fps: 30/1
17:47:07.252: format: NV12
17:47:07.252: YUV mode: 601/Partial
17:47:07.253: NV12 texture support not available
17:47:07.256: Audio monitoring device:
17:47:07.256: name: Default
17:47:07.256: id: default
---------------------------------
22:11:00.291: [x264 encoder: 'streaming_h264'] preset: ultrafast
22:11:00.291: [x264 encoder: 'streaming_h264'] profile: baseline
22:11:00.309: [x264 encoder: 'streaming_h264'] settings:
22:11:00.309: rate_control: CBR
22:11:00.309: bitrate: 2500
22:11:00.309: buffer size: 2500
22:11:00.309: crf: 0
22:11:00.309: fps_num: 30
22:11:00.309: fps_den: 1
22:11:00.309: width: 852
22:11:00.309: height: 480
22:11:00.309: keyint: 60
22:11:00.309:
22:11:00.309: [x264 encoder: 'streaming_h264'] custom settings: scenecut=0
22:11:00.355: ---------------------------------
22:11:00.356: [FFmpeg aac encoder: 'avc_aac_stream'] bitrate: 160, channels: 2, channel_layout: 3